|
| 1 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etcetra as per Tables 400.11 & 400.12 and Technical Specification Clause 406. The rate is including octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 2 | Providing and applying tack coat with bitumen emulsion (RS-I) including cleaning the road surface with hydraulic/mechanical brooms and spraying with emulsion pressure distributor at the rate 0.225 kg (zero point two two five kilogram) per square meter on the prepared Bituminous surface complete as per MORD Technical specification clause 503 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 3 | Providing and laying 30mm (Thirty millimetre) compacted thick bituminous concrete with min 40-60 TPH (forty- sixty tonne per hour) hot mix batch type/drum type plant with electronic control Grading-II using crushed aggregate 13mm (Thirteen millimetre) nominal size of specified grading premixed with bituminous binder VG-30 (Viscosity Grade-thirty) @ 5.50% (five decimal five zero percent)/ Job mix formula of mix weight transported to site, laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepered surface and rolling complete with smooth wheeled roller 8-10 (Eight-Ten) tonne capacity for initial break down rolling and vibratory roller 8-10 (Eight-Ten) tonne capacity or pneumatic type roller of 12-15 (Twelve-fifteen Tonne) with tyre pressure of atleast 0.56mpa (Zero point five six ) for intermediate rolling and finish rolling with 6-8 (six-eight) tonne smooth wheeled tandom roller to achieve the desired compaction as per MORTH technical specification clause No. 509 and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads,lifts and other incidentals. The rate is including octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST.. |
| 4 | Providing and laying of hot applied thermoplastic compound 2.5mm (two decimal five millimeter) thick and 0.10 (zero decimal one zero) meter wide strip in centre line and 0.30 (zero decimal three zero) meter wide strip in zebra crossing including reflectorising glass beads @ 250 gms (two hundred fifty grammes) per square meter area, thickness of 2.5mm (two decimal five millimeter) is exclusive of surface applied glass beads as per IRC: 35 (thirty five) in accordance with ministry of road transport specifications (Latest revision) and IRC code the finished surface to be level, uniform and free from strasks and holes including carriage of all labours, equipments and materials to various location through all modes of tranpottation in all leads , lifts and all incidental charges. The rate is including octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 5 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other equivalent type as per Clause 1501 using M30 (Grade),(design mix) concrete having coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm (twenty five millimetre), mixed in a concrete mixer of not less than 0.2 cum (zero point two cubic meter) capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 (one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 (fourteen) days using curing compound (where specified) and water finishing lines and grade as per drawing and MORD Technical specification section1500 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. Please Enable Macros to View BoQ information |
