|
| 1 | Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation , including the cost of diversion for traffic, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect Depth upto 1.5 |
| 2 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 3 | First class brick laid in cement sand mortar 1.6 in foundation and plinth |
| 4 | 10mm thick cement plaster 1.4 on sides walls |
| 5 | 10mm thick cement plaster 1:4 on floor |
| 6 | Reinforced cement concrete 1:2:4 hand mixed but including steel reinforcement |
| 7 | Cement Conc.1:2:4 including supply, carriage & with stone ballast or shingle |
| 8 | Laying and jointing of UPVC pipe 250 mm dia of 2.5 kg/ sq cm pressure ISI Marked UPVC Pipes as per ISI- 4985 along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointingand testing complete as per specifications. \\" |
| 9 | Providing, laying, fixing, testing and commissioningof Class heavy duty MS Pipe conforming to IndianStandard IS:1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nutsbolts, gasketsetc. fixing the pipe on the wall /ceiling with suitable clamp sandpainting with two or more coats of synthetice paint of required shade complete in all respects. (d)50mm internal diameter |
| 10 | Wrought Iron and mild steel ladders, framed grills, grating etc. complete fixed in position in D-tank |
| 11 | Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm |
| 12 | Providing and fixing of Alfa Alfa Valve 250mm dia fitted on riser pipe to act as Nakka (D regulators) |
| 13 | Centering and Shuttering for Concrete faces |
| 14 | Providing & Fixing of Steel Shutter Gate Assembly in Main Pipeline complete in all respect |
| 15 | Providing and fixing 315 mm Elbow/bends of 90 degree 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge |
| 16 | Providing and fixing 315mm Elbow/bends of 45 degree 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge |
| 17 | Providing and fixing 315mm equal Tee of 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge |
| 18 | Providing and fixing MS service saddle 315x 50mm as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge |
| 19 | Providing and fixing Tail end piece 315 mm of 6 kg/cm2 pressure as per IS 4985 i/c testing commisioning complete in all respect to the satisfaction of engineer in charge |
| 20 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves (315mm) ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). B) Class PN-1.6 as per ISI |
| 21 | Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing all carriages complete .C.I single air valve (Size 50mm) |
| 22 | (Loading& Unloading) pvc pipes |
| 23 | ( Carriage ) PVC/HDPEpipes all sizes( Truck load 2.20 tonnes) Please Enable Macros to View BoQ information |
