|
| 1 | Drilling of borewells of size 4\\" to 5\\" dia. in sedimentary formation using hand boresets including insertion of casing pipes and removal of casing pipes etc., including collection of samples as directed by the Departmental Officers (S.No.c (I) DRILLING WORKS ) |
| 2 | Supply and delivery of 180mm 6 KSC PVC Pipe including cost and conveyance etc., complete as per standard specifications (S.No.1.1 (III A))WD-M0016 |
| 3 | Earth work excavation for foundation in all types of soils and sub-soils and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete (For Foundation) |
| 4 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 5 | Brick work in Cement Mortar 1:5 Mix (One Cement, five Sand)using Country bricks of size (8 ¾ x “4 ¼“ x2 ¾ ) including cost and conveyance from approved Quarry to site and labour Charges etc., Complete as per standard specifications. |
| 6 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 7 | Dadooing walls with ceramic tiles of sizes 300mm X 450mm X 8mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 8 | Supply and delivery of 2 HP Submersible motor pumpset in single phase as per IS 8034 without panel board for 20 Lpm x 100m Head including all material charges and labour charges etc., complete as per TWAD specifications. WD-M1596 |
| 9 | Erection of 2HP Submersible motor pumpset in single phase as per IS 8034 without panel board for 20 LPm x 90 m Head including all material charges and labour charges etc., complete as per TWAD Specifications. WD-W0871 |
| 10 | Supply and delivery of 4.00 sq.mm PVC insulated and sheathed 3 Core Flat type Copper Cable conforming to IS 694/1990 including all cost of material and labour charges etc., complete as per standard specifications WD-M1975 |
| 11 | Supply and Delivery of 25mm 'U' PVC pipe with ISI Mark including all cost of all material charges and all labour charges etc., complete as per standard specifications. WD-M0048 |
| 12 | Supply and fixing of 2.00 HP single phase Panel Board for ISI make in good quality including cost of all material charges and labour charges etc., complete as per Specifications. WD-M1907 |
| 13 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mm x 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25mm x 3 mm including cuting, welding, grinding, locking arrangements and labour charges etc., complete. WD-M1471 |
| 14 | Supply and delivery and fixing of 1000 Litres capacity HDPE tank as per IS 12701 / 1996 including loading,unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., complete as per standard specifications. WD-M1418 |
| 15 | Earthwork excavation in narrow trenches and depositing on bank with an initial lead of 10m & lift of 2 m in Hard stiff clay, stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders W-0055 |
| 16 | Supply and delivery of 40 mm 10 kg per Sq.cm PVC PIPE ISI make in good quality including cost of all material charges and all labour charges etc., complete as per standard specifications WD-M0050 |
| 17 | Supply and delivery of 25 mm GI PIPE 'B' Class in ISI make in good quality including cost of all material charges and all labour charges etc., complete as per standardspecifications WD-M0486 |
| 18 | Supply and delivery of 20 mm GI PIPE 'B' Class in ISI make in good quality including cost of all material charges and all labour charges etc., complete as per standard specifications WD-M0485 |
| 19 | Supply delivery and fixing of follolwing PVC & GI specials including cost of all material charges and labour charges etc., complete |
| 20 | 40 mm PVC Coupler WD-M0111 |
| 21 | 50 mm PVC Bend M-0896 PWD WD-M0108 |
| 22 | 40 mm PVC Tee WD-M0113 |
| 23 | 40 mm x 20 mm GI Reducer Elbow WD-M0540 |
| 24 | 20 mm GI Stop Cock WD-M0605 |
| 25 | PVC Adhesive solution 100 g M-0519 PWD |
| 26 | Laying and jointing of 20 to 40 mm PVC pipe with specials including cost of all labour charges and testing with water refilling charges etc., complete as per standard specifications WD-W0423 |
| 27 | Re-filling with excavated soil (other than sand) complying with the standard specification for filling in foundation and basement (S.No.19.0 (b)) |
| 28 | Supply delivery and fixing of GI & PVC Borewell Specials including cost of all materials etc.,complete |
| 29 | Bore cover plate (L.R) WD-W0736 |
| 30 | 25 mm GI Flange set (S.No.5.1b (4)) |
| 31 | Collar set (Top and Bottom) (L.R) |
| 32 | 25 mm MS Clamp set (L.R) |
| 33 | 1\\" GI bend (S.No.5.1b (9) WD-M0602 |
| 34 | 1\\" GI Tee (S.No.5.1b (2) WD-M0595 |
| 35 | 1\\" GI Coupling (S.No.5.1b (3) WD-M0596 |
| 36 | 1\\" PVC Elbow (S.No.1.5 (7) WD-M0112 |
| 37 | 1\\" PVC Ball Valve (L.R) MW-M0226 |
| 38 | Nylon Rope (M-1072 PWD SoR 23-24) |
| 39 | GST 18% Please Enable Macros to View BoQ information |
