|
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.a] upto 1500 mm depth. |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) |
| 3 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 4 | Cement concrete with graded stone ballast (40 mm size excluding shuttering ) In ground floor.(A) [Pakur Variety].(a) 1:3:6 proportion |
| 5 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches |
| 6 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)/i)25 mm to 30 mm shuttering without staging in foundation |
| 7 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes./a) Pakur Variety |
| 8 | Supplying and grouting by CONBEXTRA GP-2 (FOSROC) with proper mixing with water with water as per specification and placing it at right place as per instruction of E.I.C. |
| 9 | Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint |
| 10 | Priming one coat on steel or other metal surface with Berger Epilux 5 Hb Zinc Phosphate or similar primer of approved quality.(one Coat) |
| 11 | Painting with Berger Epilux 155 High Build Enamel or similar paint of approved quality (Two Coat) on Structural members |
| 12 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. For structural members of specified sections weighing less than 22.5 Kg./m |
| 13 | Labour for M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate excludes the cost of rolled steel section but includes cost of consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. |
| 14 | Hire and labour charges for erection of special steel scaffolding in conformity with the safety norms under Factory Act to facilitate safety of workers and use of PPEs like safety belt, net, helmet etc. for job performed beyond 4.00 mtr elevation related to repairing and maintenance of building, S&P, glazing, painting works etc including dismantling of the same as per direction of EIC. |
| 15 | Miscellaneous items from Page No-01 to Page No-315 of PWD SOR ( Building works) w.e.f 01.11.20217 & UPTO 15TH CORRIGENDA DT--07.09.2022 and Page No-01 to Page No-124 of PWD SOR (S&P) W.E.F 01.11.2017 & UPTO 7TH CORRIGENDA DT--22.01.2020 not covered under the above mentioned items Please Enable Macros to View BoQ information |
