|
| 1 | M&R to roads in Dhule Industrial Area…Repainting of Name boards and Providing & Fixing Name boards. |
| 2 | Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area greater than 0.9 sq.km made out of ___mm aluminum sheet bonded with white retro reflective sheeting of Class __ ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on two no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 2mm aluminum sheet Class B |
| 3 | Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of _____ mm made out of ____mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. ClassC ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 900 mm made out of 2mm aluminum sheet |
| 4 | Providing and fixing Mandatory/Regulatory sign boards in circular shape of ___mm dia made out of ____mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 600 mm dia made out of 3mm aluminum composite material |
| 5 | Repairing & Painting of MIDC name board including scrapping all structural members, board on one side, construction of scaffolding and its dismentalling, painting of back side abd structural members by synthetic super enamel paint in two coats abd painting front side of name boards by base coat in two coats and lettering in synthetic super enamel paint as per directions of Engineer in charge etc complete.( Rate excluding GST) |
| 6 | Repairing & Painting of MIDC name board including scrapping all structural members, board on both side, construction of scaffolding and its dismentalling, painting of back side abd structural members by synthetic super enamel paint in two coats abd painting front side of name boards by base coat in two coats and lettering in synthetic super enamel paint as per directions of Engineer in charge etc complete.( Rate excluding GST) |
| 7 | Providing and fixing standard size MIDC name board or layout board for two side name board , 3.66 m x 2.44 m made from MS angle frame 40 x 40 x 6 mm and 25 x 25 x 5 mm and MS flats 25 mm x 3 mm as per drawings, 16 gauge GI sheets including MS stand posts 5.5 m high made out of 75 x 75 x 6mm MS angle diagonal braces of 75 x 75 x 6 mm angles and horizontal braces of 40 x 40 x 6 mm angles including excavation of pits of size 0.61 m x 1.3 m x 0.7 m and 1:2:4 cement concrete of size 0.61 x 1.3 x 0.92 m welding, bolting, erecting in position, transporting and painting to complete structure with synthetic enamel paint two coats over anti-corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST) |
| 8 | Providing and fixing standard size MIDC name board or layout board for one side name board , 3.66 m x 2.44 m made from MS angle frame 40 x 40 x 6 mm and 25 x 25 x 5 mm and MS flats 25 mm x 3 mm as per drawings, 16 gauge GI sheets including MS stand posts 5.5 m high made out of 75 x 75 x 6mm MS angle diagonal braces of 75 x 75 x 6 mm angles and horizontal braces of 40 x 40 x 6 mm angles including excavation of pits of size 0.61 m x 1.3 m x 0.7 m and 1:2:4 cement concrete of size 0.61 x 1.3 x 0.92 m welding, bolting, erecting in position, transporting and painting to complete structure with synthetic enamel paint two coats over anti-corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST) |
| 9 | M&R to roads in Chalisgaon Industrial Area…Repainting of Name boards and Providing & Fixing Name boards. |
| 10 | Repairing & Painting of MIDC name board including scrapping all structural members, board on both side, construction of scaffolding and its dismentalling, painting of back side abd structural members by synthetic super enamel paint in two coats abd painting front side of name boards by base coat in two coats and lettering in synthetic super enamel paint as per directions of Engineer in charge etc complete.( Rate excluding GST) |
| 11 | Shifting and Repainting of MIDC name board including scrapping all structural members, board on both side, construction of scaffolding and its dismentalling, painting of back side abd structural members including excavation of pits of size 0.61 m x 1.3 m x 0.7 m and 1:2:4 cement concrete of size 0.61 x 1.3 x 0.92 m welding, bolting, erecting in position, transporting and painting to complete structure with synthetic enamel paint two coats over anti-corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings and directions of Engineer in charge etc complete. (Rates excluding GST) |
| 12 | Providing and fixing standard size MIDC name board or layout board for two side name board , 3.66 m x 2.44 m made from MS angle frame 40 x 40 x 6 mm and 25 x 25 x 5 mm and MS flats 25 mm x 3 mm as per drawings, 16 gauge GI sheets including MS stand posts 5.5 m high made out of 75 x 75 x 6mm MS angle diagonal braces of 75 x 75 x 6 mm angles and horizontal braces of 40 x 40 x 6 mm angles including excavation of pits of size 0.61 m x 1.3 m x 0.7 m and 1:2:4 cement concrete of size 0.61 x 1.3 x 0.92 m welding, bolting, erecting in position, transporting and painting to complete structure with synthetic enamel paint two coats over anti-corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST) |
| 13 | Providing and fixing standard size MIDC name board or layout board for one side name board , 3.66 m x 2.44 m made from MS angle frame 40 x 40 x 6 mm and 25 x 25 x 5 mm and MS flats 25 mm x 3 mm as per drawings, 16 gauge GI sheets including MS stand posts 5.5 m high made out of 75 x 75 x 6mm MS angle diagonal braces of 75 x 75 x 6 mm angles and horizontal braces of 40 x 40 x 6 mm angles including excavation of pits of size 0.61 m x 1.3 m x 0.7 m and 1:2:4 cement concrete of size 0.61 x 1.3 x 0.92 m welding, bolting, erecting in position, transporting and painting to complete structure with synthetic enamel paint two coats over anti-corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST) |
| 14 | M&R to roads in Nandurbar Industrial Area…Repainting of Name boards and Providing & Fixing Name boards. |
| 15 | Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area greater than 0.9 sq.km made out of ___mm aluminum sheet bonded with white retro reflective sheeting of Class __ ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on two no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 2mm aluminum sheet Class B |
| 16 | Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of _____ mm made out of ____mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. ClassC ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 900 mm made out of 2mm aluminum sheet |
| 17 | Repairing & Painting of MIDC name board including scrapping all structural members, board on both side, construction of scaffolding and its dismentalling, painting of back side abd structural members by synthetic super enamel paint in two coats abd painting front side of name boards by base coat in two coats and lettering in synthetic super enamel paint as per directions of Engineer in charge etc complete.( Rate excluding GST) |
| 18 | Repairing & Painting of MIDC name board including scrapping all structural members, board on one side, construction of scaffolding and its dismentalling, painting of back side abd structural members by synthetic super enamel paint in two coats abd painting front side of name boards by base coat in two coats and lettering in synthetic super enamel paint as per directions of Engineer in charge etc complete.( Rate excluding GST) |
| 19 | Shifting and Repainting of MIDC name board including scrapping all structural members, board on both side, construction of scaffolding and its dismentalling, painting of back side abd structural members including excavation of pits of size 0.61 m x 1.3 m x 0.7 m and 1:2:4 cement concrete of size 0.61 x 1.3 x 0.92 m welding, bolting, erecting in position, transporting and painting to complete structure with synthetic enamel paint two coats over anti-corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings and directions of Engineer in charge etc complete. (Rates excluding GST) |
| 20 | Providing and fixing standard size MIDC name board or layout board for one side name board , 3.66 m x 2.44 m made from MS angle frame 40 x 40 x 6 mm and 25 x 25 x 5 mm and MS flats 25 mm x 3 mm as per drawings, 16 gauge GI sheets including MS stand posts 5.5 m high made out of 75 x 75 x 6mm MS angle diagonal braces of 75 x 75 x 6 mm angles and horizontal braces of 40 x 40 x 6 mm angles including excavation of pits of size 0.61 m x 1.3 m x 0.7 m and 1:2:4 cement concrete of size 0.61 x 1.3 x 0.92 m welding, bolting, erecting in position, transporting and painting to complete structure with synthetic enamel paint two coats over anti-corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST) |
| 21 | M&R to roads in Navapur Industrial Area…Repainting of Name boards and Providing & Fixing Name boards. |
| 22 | Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area greater than 0.9 sq.km made out of ___mm aluminum sheet bonded with white retro reflective sheeting of Class __ ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on two no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 2mm aluminum sheet Class B |
| 23 | Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of _____ mm made out of ____mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. ClassC ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 900 mm made out of 2mm aluminum sheet |
| 24 | Providing and fixing Mandatory/Regulatory sign boards in circular shape of ___mm dia made out of ____mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 600 mm dia made out of 3mm aluminum composite material |
| 25 | Repairing & Painting of MIDC name board including scrapping all structural members, board on both side, construction of scaffolding and its dismentalling, painting of back side abd structural members by synthetic super enamel paint in two coats abd painting front side of name boards by base coat in two coats and lettering in synthetic super enamel paint as per directions of Engineer in charge etc complete.( Rate excluding GST) |
| 26 | Providing and fixing standard size MIDC name board or layout board for two side name board , 3.66 m x 2.44 m made from MS angle frame 40 x 40 x 6 mm and 25 x 25 x 5 mm and MS flats 25 mm x 3 mm as per drawings, 16 gauge GI sheets including MS stand posts 5.5 m high made out of 75 x 75 x 6mm MS angle diagonal braces of 75 x 75 x 6 mm angles and horizontal braces of 40 x 40 x 6 mm angles including excavation of pits of size 0.61 m x 1.3 m x 0.7 m and 1:2:4 cement concrete of size 0.61 x 1.3 x 0.92 m welding, bolting, erecting in position, transporting and painting to complete structure with synthetic enamel paint two coats over anti-corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST) |
| 27 | Providing and fixing standard size MIDC name board or layout board for one side name board , 3.66 m x 2.44 m made from MS angle frame 40 x 40 x 6 mm and 25 x 25 x 5 mm and MS flats 25 mm x 3 mm as per drawings, 16 gauge GI sheets including MS stand posts 5.5 m high made out of 75 x 75 x 6mm MS angle diagonal braces of 75 x 75 x 6 mm angles and horizontal braces of 40 x 40 x 6 mm angles including excavation of pits of size 0.61 m x 1.3 m x 0.7 m and 1:2:4 cement concrete of size 0.61 x 1.3 x 0.92 m welding, bolting, erecting in position, transporting and painting to complete structure with synthetic enamel paint two coats over anti-corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST) |
| 28 | Rebate to old dismantled Two side Name board |
| 29 | M&R to roads in Nardana Industrial Area…Repainting of Name boards and Providing & Fixing Name boards. |
| 30 | Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area greater than 0.9 sq.km made out of ___mm aluminum sheet bonded with white retro reflective sheeting of Class __ ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on two no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 2mm aluminum sheet Class B |
| 31 | Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of _____ mm made out of ____mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. ClassC ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 900 mm made out of 2mm aluminum sheet |
| 32 | Providing and fixing Mandatory/Regulatory sign boards in circular shape of ___mm dia made out of ____mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 600 mm dia made out of 3mm aluminum composite material |
| 33 | Repairing & Painting of MIDC name board including scrapping all structural members, board on one side, construction of scaffolding and its dismentalling, painting of back side abd structural members by synthetic super enamel paint in two coats abd painting front side of name boards by base coat in two coats and lettering in synthetic super enamel paint as per directions of Engineer in charge etc complete.( Rate excluding GST) |
| 34 | Repairing & Painting of MIDC name board including scrapping all structural members, board on both side, construction of scaffolding and its dismentalling, painting of back side abd structural members by synthetic super enamel paint in two coats abd painting front side of name boards by base coat in two coats and lettering in synthetic super enamel paint as per directions of Engineer in charge etc complete.( Rate excluding GST) |
| 35 | Providing and fixing standard size MIDC name board or layout board for two side name board , 3.66 m x 2.44 m made from MS angle frame 40 x 40 x 6 mm and 25 x 25 x 5 mm and MS flats 25 mm x 3 mm as per drawings, 16 gauge GI sheets including MS stand posts 5.5 m high made out of 75 x 75 x 6mm MS angle diagonal braces of 75 x 75 x 6 mm angles and horizontal braces of 40 x 40 x 6 mm angles including excavation of pits of size 0.61 m x 1.3 m x 0.7 m and 1:2:4 cement concrete of size 0.61 x 1.3 x 0.92 m welding, bolting, erecting in position, transporting and painting to complete structure with synthetic enamel paint two coats over anti-corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST) |
| 36 | Providing and fixing standard size MIDC name board or layout board for one side name board , 3.66 m x 2.44 m made from MS angle frame 40 x 40 x 6 mm and 25 x 25 x 5 mm and MS flats 25 mm x 3 mm as per drawings, 16 gauge GI sheets including MS stand posts 5.5 m high made out of 75 x 75 x 6mm MS angle diagonal braces of 75 x 75 x 6 mm angles and horizontal braces of 40 x 40 x 6 mm angles including excavation of pits of size 0.61 m x 1.3 m x 0.7 m and 1:2:4 cement concrete of size 0.61 x 1.3 x 0.92 m welding, bolting, erecting in position, transporting and painting to complete structure with synthetic enamel paint two coats over anti-corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST) Please Enable Macros to View BoQ information |
