|
| 1 | Supply and delivery of 40 Mitr. decorative onumental pole with 24 watt LED fixtre including all accessoriesa) 40Mh decorative ornamental pole. Dooble arm Make K-LITE/ equivalent Model of Bajai/Shourya Electronics/GM) Test Certificate to be provided from Manufacturer |
| 2 | b) 4 watt LED Bulb fixture for the above pole Make K-LITE/ equivalent Model of Bajaj/Shourya Electronics/GM/Havells) Test Certificate to be provided from Manufacturer. |
| 3 | Erection the decorative pole with necessary foundation, including all accessories |
| 4 | Earthing with 15 88 mm dia 1.8 mti long GI earth spike against each pole Ref: KMC schedule/GCM approved rate |
| 5 | Supply, delivery and laying of 3 core 1.5 Sq mm. Flexible Multicore Copper cable as per IS 694 (connection from Pole terminal to Light Fixture, junction box to post of luminaries) Make: Gloster/Havells/Polycab/R.R. Kabel/Mescab |
| 6 | Supplying and fixing of 40 mm dia High Density poly-ethylene Pipe conforming to IS 4984-1985, working pressure 6 Kg/Sq Cm (PWD-17, Pimbing works, Page 19) |
| 7 | S&F medium gauge Gl pipe (ISI-Medium) protection with necessary fittings and jointing materials as required 40 mm dia Gi pipe (PWD-17, F-6, sl no. 11-c) |
| 8 | Supply of 1.1 KV grade XLPE insulated Aluminum conductor armoured Cable 2 core 10 Sq mm Make Gloster/Havells/Polycab/R R. Kabel/Mescab |
| 9 | Laving of one cable upto 50 Sq mm through existing RCC/Hume/Gl pipe open masonry trench for single 2,2,3,5 & 4 core (PWD-17, F-1/3a) |
| 10 | Laying of one No. cable upto 35 sqmm in underground trench 460mm wide x 760 mm average depth, with brick protection on thetop of the cable with 8 (eight) Nos bricks per metre, includingfilling the space 9 between the brick & cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed (PWD-17, F-2/1a) |
| 11 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry ofXLPE/PVC Armoured cables as below. For 2 core 10 Sq mm (PWD-17, F-4, sl no. 7-a) |
| 12 | Finishing the end of following XLPE/PVC armoured cables bycrimping method incl supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials: For 2 core 10 Sq.mm (PWD-17, F-5, si no 8b-iii) |
| 13 | Supply & tising of feeder pillar box (over all approx dimension 1400mm x 750mm x 525mm fibricated from 3 mm & 6 mm thick MS plate as per drawing in brick cement foundation (1: 6) plastering (12 mm thick) neat cementing (1.5 mm thick) including supplying & fixing 250 mm long 16 mm dra bolts, nuts, washers, back plate etc including supplying & fixing sheet metal (16 SWG) iron Clad Bus Bar chamber on angle iron frame with 4 Bars, 415 V. 63A 4x20x5mm and 1 no 4P 32A MCB, 4 no 4P 16A MCB, 1 No Time switch model TSQ-100, Type OTN, 1 no contactor cat no-SS90910 (or equivalent), 1 no Auto/Manual selector selector, push Button sets and 2 nos earthing with 50 mm dia GI, pipe 3.64 mm thick x 3.04 Mtr long and 1 x 4 SWG GI (Hot Dip) wire (4 Mtrs long), 13 mm dia x 180 mm long GI bolts, double nuts, double washers incl S&F 15 min dia Gl pipe protection (1 Mtr long) to be fitted with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mtrs Below the ground level 4 nos as per drawing & cirection of EIC |
| 14 | WBSEDCL/CESC connection charges |
| 15 | Suppying Fitting, Fixing Marble Folok including Brick work, Sand filling Plaster, Painting works |
| 16 | Sub Total |
| 17 | GST 18% |
| 18 | CESS 1% Please Enable Macros to View BoQ information |
