|
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. (A) All kinds of soil. |
| 2 | B) Ordinary Rock |
| 3 | C) Hard Rock(Blasting Prohibited) |
| 4 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: as directed by Engineer-in-charge. (A) All kinds of soil. |
| 5 | B) Ordinary Rock |
| 6 | C) Hard Rock. |
| 7 | Providing and laying cement concrete in retaining walls,return walls, walls (anythickness) including attached pilasters, columns, piers, abutments pillars, posts, struts, buttresses,string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain windows sills, fillets etc up to floors V level, including curing but excluding the cost of centring, shuttering and finishing with 1:3:6 ( 1 cement :3 coarse sand ) (zone-III) :6 graded stone aggregateb20mm nominals size) |
| 8 | Dewatering/pumping out water from foundation by machanical means till concrete abutment completed up to water level including all sorts of carriage complete job. |
| 9 | Providing and laying soling stone including cost of stone and cost of carriage upto site of work . |
| 10 | Providing and laying cement concrete of M25 grade in, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses,parapets, copining , bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc, including the cost of centering, shuttering and finishing. |
| 11 | Providing and fixing reinforcing steel in position HYSD reinforment steel of grade Fe-500 including. Febrication cutting bending with 18 guage annealed steel wire carriage complete as per drawing. |
| 12 | Supplying and filling in layers with earth from raft to embankment including watering, ramming, consolidation and dressing complete. |
| 13 | Providing and fixing of weep holes in abutments walls with 100mm dia PVC pipes cut to length and profile as required to be installed in concrete and other incident complete. |
| 14 | Providing and installing in position of N-Elastomeric bearing at free ends of Truss Girders Over Abutment and piers location as per grawing which shall include the following a) Cost of bearing assembly, transportation, erection and steel girder, deck slab. etc. |
| 15 | Design/supply/ fabrication/ launching of superstructure with RCC deck slab of 50 m Span steel Truss bridge etc. complete. |
| 16 | Providing and fixing in position expansion joints complete with U-strip made from 24 guage copper strip MS angle with welded anchors and MS top plate bolts nuts etc complete as per most. |
| 17 | Drainage spouts complete as per drawing and technical specification complete. |
| 18 | Providing and fixing in position steel pipe railling consisting of IS rolled steel joist posts designation IS MB (100x100x75) at 2.5m interval and three rows of 50mm dia steel pipes including fixing in position on bridge deck complete as per Drawing and technical specification complete. |
| 19 | Centering and shuttering including strutting propping etc and removal of form work.(a) Foundations, footings, bases of columns etc. |
| 20 | B) Columns pillars piers abutments and posts etc. |
| 21 | C) Suspended floors roofs landings balconies and access platform etc. Please Enable Macros to View BoQ information |
