|
| 1 | ESP32 Dev Board (ESP32-WROOM-32) (ESP32-WROOM-32 WiFi + BLE) |
| 2 | 'Arduino Uno R3 (ATmega328P) |
| 3 | Arduino Nano ESP32 / Nano 33 IoT( ARM Cortex-M0+ WiFi/BLE) |
| 4 | NodeMCU ESP8266 (ESP32-C3) |
| 5 | Raspberry Pi 4 (4GB) (4GB/8GB RAM SBC) |
| 6 | Raspberry Pi 5 (8GB) (8GB RAM BCM2712) |
| 7 | DHT22 (AM2302) Temp & Humidity (humidity ±2%RH (Max ±5%RH); humidity 0-100%RH) |
| 8 | HC-SR04 Ultrasonic Sensor (Ranging Distance: 2cm - 4m; 15mA) |
| 9 | PIR Motion Sensor (HC-SR501) (Distance Measure (cm): 300 ~ 700; Operating Voltage (V):4.5 to 20) |
| 10 | MQ-135 Air Quality Sensor (operates at 5V; digital and analog output pin) |
| 11 | Soil Moisture (Capacitive) (compatibility with a Raspberry Pi; operating voltage range of 3.3 ~ 5.5V.) |
| 12 | BMP280 / BME280 Pressure Sensor (Operating Pressure 300 hPa to 1100 hPa; -40 to +85 deg. Celsius) |
| 13 | BH1750 Light Sensor (1 lux to 65535 lux; Communication Mode:I2C) |
| 14 | VL53L1X Time-of-Flight (ToF) Sensor (Measuring Range: 40mm – 4000mm (4m); Operating Voltage: 2.6V – 5V (3.3V/5V logic compatible) |
| 15 | MPU-6050 IMU Sensor (3-aixs accelerometer and 3-axis gyroscope; 3-5V) |
| 16 | Hall Effect Sensor (A3144) (Operating voltage: typically 5V.; Operating temperature: -40°C to 85°C.) |
| 17 | RFID RC522 Module (SPI Data Transfer Rate: Max. 10Mbit/s; mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro) |
| 18 | 4-Channel Relay Module (5V) (3 Outputs per Relay: NO, NC and C; 10A @ 250 VAC) |
| 19 | SG90 Servo Motor (Stall torque @4.8V : 1.2kg-cm; 360d rotation |
| 20 | Stepper Motor (NEMA17) + A4988 driver (kit) (Rate Current: 1.5-2.0A; Step Angle: 1.8° ± 5% ) |
| 21 | L298N DC Motor Driver (copatible with Arduino and Raspberry Pi; ) |
| 22 | DC Motors (small) (Operating Voltage: 3 to 6VDC) |
| 23 | LoRa Module (SX1276) (Operating Voltage: 3 to 6VDC;Excellent blocking immunity; FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.) |
| 24 | NB-IoT / SIM7000E Module (Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc; Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+) |
| 25 | BLE Beacon (BLE 5.0) (Long Range BLE 5.0; Bluetooth) |
| 26 | Raspberry Pi Camera Module V2 (8MP) (Supports 1080p30, 720p60 and 640x480p90 video; compatible rasberry pi latest version) |
| 27 | USB Microphone Array / ReSpeaker (Sensitivity: -26 dBFS; Power Supply: USB 5V, external 5V |
| 28 | Google Coral / Intel NCS2 (Edge TPU) (Dual Edge TPU; -40 to +85°) |
| 29 | Jetson Nano / Orin Nano (edge AI) (4GB/8GB memory) |
| 30 | Raspberry Pi AI HAT / AI expansion (Compatibility: Raspberry Pi 5 (required), Raspberry Pi OS support; AI Performance: Up to 26 TOPS ) |
| 31 | Digital Oscilloscope (100 MHz) - Rigol/Siglent class (100 MHz bandwidth; TFT-LCD display with 800 * 480 resolution) |
| 32 | 'Logic Analyzer (8-ch USB) (Input feature: 5PF,100K Ohm.;for MCU, ARM system and FPGA development) |
| 33 | Bench Power Supply (0-30V, 5A) (OVP/OCP protection; usb interface;0 – 30) |
| 34 | Digital Multimeter (Auto-ranging) (minimum count of 4000;DC/AC Current Measurement: Up to 10A) |
| 35 | 'Soldering & Rework Station (ESD-safe) (60watt; temperature adjustment) |
| 36 | Breadboard + Jumper Kit (full-size) (for Experimenting With Circuit Design In Labs;wire sizes 20-29 AWG) |
| 37 | PCB Prototyping Kit / Mini Fab (2.54mm Hole Pitch; Single-Sided) |
| 38 | Smart Home AI IoT Demo Kit (working voltage 7.4~8.5V comm: wifi) |
| 39 | Smart Agriculture IoT Demo Kit (Soil Moisture Sensor;IoT-Based Smart Agriculture Monitoring ) |
| 40 | Industrial IoT Trainer Kit (embedded system programming; with sensors) |
| 41 | ACEBOTT Smart Farm Kit (connectivity: Wi-Fi | Bluetooth LE; Interfaces: UART | I2C | SPI | CAN) |
| 42 | 6-DOF Articulated Robotic Arm (4.8–6.8 V;Pulse; standard PWM control) |
| 43 | FDM 3D Printer Bambu Lab (Print Size (L x W x H) (mm):256 x 256 x 256Filament Supports: ABS, ASA, PA, PC, PET, PETG, PLA, PVA, TPUSupported Nozzle size (mm):0.2, 0.4 (Included)Hotend Temperature (°C):300) |
| 44 | Remotely Controlled Aircraft (RC Aircraft) (RC Aircraft with 1.6m Wing Span and range of 1 to 2 kms and payload capacity of 200 to 300 grams.Components: BLDC Motor, LiPo Battery ,2.4Ghz 6CH Transmitter and Receiver |
| 45 | FPV Racing Drone (First Person View (FPV) Racing Drone with 5.8Ghz Wireless Goggles for Live Video and range of 1 to 2 kms and payload capacity of 200 to 300 grams.Components: 250mm Racing Frame, BLDC Motor, LiPo Battery ,2.4Ghz 6CH Transmitter and Receiver |
| 46 | Quadcopter UAV (Quadcopter UAV is a manually operated UAV for training and experiment purpose. It has a payload capacity of 200 to 300 grams and range of 1 to 2 kms.Components: Frame with landing gear, BLDC Motor, LiPo Battery ,2.4Ghz 6CH Transmitter and Receiver |
| 47 | Autonomous Quadcopter Drone with wireless 4k HD camera (Autonomous Quadcopter Drone with wireless HD camera is an autonomous drone for carrying out pre-defined missions and it can be used for carrying out experiments and research. It has the payload lifting capacity of up to 500 grams and range of 1 to 2 kms.Components: 650mm Frame with landing gear, BLDC Motor, LiPo Battery, 2.4Ghz 6CH Transmitter and Receiver, Wireless 4k HD camera with Gimbal, Autonomous Flight Modes for automatic flight. |
| 48 | Hexacopter Aerial Vehicle (Hexacopter Aerial Vehicle is a manual operated UAV with Six motors or Hexa configuration. It is used for research activities with a higher payload lifting capacity of up to 600 grams. It has the range of 1 to 2 kms. Components: Frame with landing gear, BLDC Motor, LiPo Battery ,2.4Ghz 6CH Transmitter and Receiver |
| 49 | Parachute Unmanned Aerial Vehicle (Tri-Wheel structure with single motor and 1.5m parachute, servo, LiPo Battery ,2.4Ghz 6CH Transmitter and Receiver) |
| 50 | DIY Quadcopter UAV Kit (DIY Quadcopter UAV kit is for the students to learn the basics of drones, its components, integration and calibration procedures. Components: F450mm glass frame Quad with landing gear, BLDC Motor, LiPo Battery ,2.4Ghz 6CH Transmitter and Receiver with range of 1-2 km, Payload lifting capacity 200 – 300 grams) |
| 51 | Drone Simulator (Drone Simulator Software with USB Remote Control for practicing the flying in the computer to learn and get the control of the drone before going for real flight.) |
| 52 | Thrust Measurement System (An experimental setup of thrust Measurement up to 10 kg. It will measure the Current and power required) |
| 53 | Static Autopilot Mock Model (1.5 m wingspan static fixed wing aircraft model to display the functions of autopilot system) |
| 54 | Autopilot & Communication System (A set of Autopilot and communication system which includes Pixhawk Flight Controller, GPS, Mavlink Communication, Power Module ) |
| 55 | Drone Frames (S500mm glass fiber Quad frame) |
| 56 | Drone Frames 'F550mm glass Fiber Hexa frame |
| 57 | Drone Frames Racing Drone frame 250mm |
| 58 | Drone Frames Carbon Fiber Quad Frame 650mm |
| 59 | Flight Controllers (QQ Super Thunder, KK 2.1) |
| 60 | Tools, Machinery, Miscellaneous and spares (Drilling Machine Bench press) |
| 61 | Tools, Machinery, Miscellaneous and spares 'Bosch Angle Grinder GWS 600 |
| 62 | Tools, Machinery, Miscellaneous and spares Bosch Drilling kit GSB 600 |
| 63 | Tools, Machinery, Miscellaneous and spares Bosch Zig Saw GST 680 |
| 64 | Tools, Machinery, Miscellaneous and spares Filing tools |
| 65 | Tools, Machinery, Miscellaneous and spares Allen Key sets |
| 66 | Tools, Machinery, Miscellaneous and spares Soldering Station |
| 67 | Tools, Machinery, Miscellaneous and spares Cutting Mat |
| 68 | Tools, Machinery, Miscellaneous and spares Professional Battery Charger |
| 69 | Tools, Machinery, Miscellaneous and spares Digital Anemometer |
| 70 | 'Tools, Machinery, Miscellaneous and spares 'Power Distribution Board |
| 71 | Tools, Machinery, Miscellaneous and spares LiPo Bag and LiPo Battery Checker |
| 72 | Tools, Machinery, Miscellaneous and sparesDigital Calliper |
| 73 | Tools, Machinery, Miscellaneous and spares Flat weighing scale |
| 74 | Tools, Machinery, Miscellaneous and spares'Electronic Hanging Balance |
| 75 | Tools, Machinery, Miscellaneous and spares Peg board with tools |
| 76 | Tools, Machinery, Miscellaneous and spares Golden Connectors -3.5mm |
| 77 | Tools, Machinery, Miscellaneous and spares Soldering rods with variable temperature, flux, soldering lead |
| 78 | Hot glue gun with glue sticks |
| 79 | Tools, Machinery, Miscellaneous and spares Screws, washer, nuts, cycle spokes rod, control horns, Cutters, Fibre and Insulation Tapes, Zip tags |
| 80 | Tools, Machinery, Miscellaneous and spares Safety Gears |
| 81 | Microcontroller and sensors (Arduino Controller Board) |
| 82 | Microcontroller and sensors (Raspberry Pi 4 2 GB RAM) |
| 83 | Microcontroller and sensors ( 'Data Shield) |
| 84 | Microcontroller and sensors (Sensor Kit) |
| 85 | Microcontroller and sensors ( ESP32 V1.0 IoT Module) |
| 86 | Microcontroller and sensors ( M5 Stack Core 2 IoT Development Kit) |
| 87 | Microcontroller and sensors (TF Luna LiDAR Distance sensor) |
| 88 | Microcontroller and sensors ( 'NVIDIA Jetson Nano Kit) |
| 89 | Materials for Making Drone (16mm Carbon Fiber Tube, , , Balsa Wood) |
| 90 | Materials for Making Drone ('2mm Carbon Fiber 'Materials for Making Drone Sheet 'Materials for Making Drone 300mmx200mm) |
| 91 | Materials for Making Drone (Choro sheets 3mm 4ft x 3ft) |
| 92 | ''Materials for Making Drone (Aluminum Tubes) |
| 93 | 'Materials for Making Drone ('Aluminum Composite 3mm 300mmx200) Please Enable Macros to View BoQ information |
