|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. DSR 4.1 |
| 2 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) DSR 4.1.3 |
| 3 | 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.8 |
| 4 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : DSR 5.1 |
| 5 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.1.2 |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. DSR 5.22 |
| 7 | Cold twisted bars DSR 5.22.3 |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: DSR 6.1 |
| 9 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.1.1 |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in : DSR 6.4 |
| 11 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 12 | 12 mm cement plaster finished with a floating coat of neat cement of mix : DSR 13.7 |
| 13 | 1:3 (1 cement: 3 fine sand) DSR 13.7.1 |
| 14 | P/F of G.I. pipes compelte with G.I. fitting and clamps including making good the wall etc. DSR 18.10 |
| 15 | 20 mm dia nominal bore DSR 18.10.2 |
| 16 | 25 mm dia nominal bore DSR 18.10.3 |
| 17 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): DSR 18.17 |
| 18 | 20 mm nominal bore DSR 18.17.1A |
| 19 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : DSR 18.18 |
| 20 | 20 mm nominal bore DSR 18.18.2 |
| 21 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : DSR 18.46 |
| 22 | 20 mm nominal bore DSR 18.46.2 |
| 23 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 24 | Supplying and Fixing of Monoblock pump set 2 HP make crompton with required platform and electrical wire Complete in all respect or as per approved make List |
| 25 | Providing and fixing MS shed made with MS angle 25x5mm and poly carbonate sheet with nut bolts, Fixing Complete |
| 26 | Providing & fixing IRC encloser jali of mesh size 32 mm x 32 mm of 10 gauge with frame work of MS angle 40x40x5 mm and MS flat 32x5 mm including painting with two coats of synthetic enamel paint over a coat of steel arrangeent all as specified. (Size of angle grid should not be more than 12 sft) with two coats of black paint as per site requirement as desired by EIC |
| 27 | Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm |
| 28 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1cement : 5 coarse sand (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coatof neat cement on walls and bed concrete etc. complete as per standard design: DSR 19.3 |
| 29 | Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : DSR 19.30.3 |
| 30 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 19.30.3.1 |
| 31 | Supplying & Fixing of Water Purifier with 3 Stage Purification system consisting of sediment filter, Activated Carbon Filter and Ultravoilet treatment having purification capacity of 200 LPH, water control sensor for automatic control of purifier as per level of water cooler and valve for back flushing of sediment filter complete of make Aquaguard, Kent, Blue Star or equivalent make in the same range of AOR Please Enable Macros to View BoQ information |
