|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in:as per DSR 6.1 |
| 2 | Cement mortar 1:4 (1 cement : 4 coarse sand) as per DSR 6.1.1 |
| 3 | 12 mm cement plaster finished with a floating coat of neat cement of mix : as per DSR 13.7 |
| 4 | 1:3 (1 cement: 3 fine sand) as per DSR 13.7.1 |
| 5 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting complete DSR 17.7 |
| 6 | White Vitreous China Wash basin size 550x400 mm DSR 17.7.3 |
| 7 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good DSR 17.10 |
| 8 | Kitchen sink without drain board DSR 17.10.2 |
| 9 | 610x460 mm bowl depth 200 mm. DSR 17.10.2.2 |
| 10 | Providing and fixing white vitreous chinaware closet squatting pan DSR 17.13 |
| 11 | Orissa pattern W.C. pan of size 580 mm DSR 17.13.2 |
| 12 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. DSR 17.15.1 |
| 13 | Providing and fixing of C.P. brass Jet with brass nossel steel flange & PVC flexible pipe complete in all respect make DSR 17.16A |
| 14 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete DSR 17.19 |
| 15 | 10 litre ( flush) capacity-white DSR 17.19.1 |
| 16 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :DSR 17.20 |
| 17 | White solid plastic seat with lid. DSR 17.20.1 |
| 18 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings as DSR 17.28 |
| 19 | 32 mm dia DSR 17.28.2.1 |
| 20 | Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal |
| 21 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good : DSR No. 17.60 |
| 22 | 100 mm inlet and 75 mm outlet Sand cast iron S&S as per IS: 3989 DSR 17.60.2.1 |
| 23 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good etc. As per 18.10 |
| 24 | 15 mm dia. nominal bore as per DSR 18.10.1 |
| 25 | 20 mm dia. nominal bore as per DSR 18.10.2 |
| 26 | Providing and fixing of GM Peet valve complete in all respect DSR 18.17.1(A) |
| 27 | 15mm dia |
| 28 | 20mm dia DSR 18.17.1A |
| 29 | Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 30 | 15mm nominal bore DSR 18.21.2.1 |
| 31 | Providing & fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46 |
| 32 | 15mm dia DSR 18.46.1 |
| 33 | 20mm dia DSR 18.46.2 |
| 34 | Provd. & placing on terrace (at all floor levels) polye- thylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings complete DSR 18.48 |
| 35 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 DSR 18.49 |
| 36 | 15 mm nominal bore. DSR 18.49.1 |
| 37 | Providing and fixing C.P. brass long body bib cock 15 mm dia DSR 18.51.1 |
| 38 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points ... DSR 18.53 |
| 39 | 15 mm nominal bore. DSR 18.53.1 |
| 40 | Providing and fixing of C.P. extension nipple upto 1'' length. DSR 18.53A |
| 41 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete DSR 18.62 |
| 42 | 15 mm nominal bore, DSR 18.62.1 |
| 43 | 20 mm nominal bore, DSR 18.62.2 |
| 44 | Providing and fixing of CP waste complete |
| 45 | 32 mm dia for WHB/Sink |
| 46 | Conversion for OWC to EWC with 4\\" C.I.H.R bend, 4\\" PVC collar 1 No 4\\" PVC pipe of 4kg pressure upto 1'-6\\" long including dismantling of OWC pan and floor and repair of flooring to its original complete in all respect . |
| 47 | Providing and fixing of C.P. Cup heavy duty |
| 48 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) 100 mm dia, of approved make. |
| 49 | Providing and fixing of C.P. pillar cock of make |
| 50 | Providing and fixing of fitting for low level flushing cistern |
| 51 | Providing and fixing of looking mirror Bevelled Edge ( 22\\" x 16\\") complete in all respect |
| 52 | Providing and fixing of PVC handle for l/level cistern complete M/Cera make |
| 53 | Providing and fixing of PVC tank cover |
| 54 | 500/300 ltr cap. |
| 55 | Providing and fixing of PVC ball cock for l/level cistern complete |
| 56 | Providing and fixing of CP/SS Long Bend for OWC |
| 57 | Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make |
| 58 | Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm |
| 59 | Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO |
| 60 | Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 61 | Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 62 | Providing and laying of UPVC pipe, IS-4985 marked, Pressure 6 kg/cm2 including cutting, joining, solvent and all necessary fittings complete in all respect except excavation. |
| 63 | ii) 4\\" i/d |
| 64 | ii) 3\\" i/d |
| 65 | Providing and fixing of PVC Tee size 100mm x32mm complete in all respect. |
| 66 | Providing and fixing of Tank Nipple complete in all respect. |
| 67 | Const. of curb with C.C. 1:2:4 alongwith upto 1’-0” depth to make it water proof including Cost of sand, bajri |
| 68 | Providing and fixixng of CP Brass Spindle (Heavy Duty) for bib taps and Piller taps weight approx. 110 grms. Please Enable Macros to View BoQ information |
