|
| 1 | Supply of Installation Testing Commissioning of Nozzle made with gunmetal Grade Geyser jet 100mmı with adjustable nozzle for height adjustment of the fountain etc., Complete as required. |
| 2 | SITC of Single Jet Crown Nozzles Complete with ball joint for 15 Degree pivoting made of brass with Nickle plating,flow straightner in following size . Height of water stream upto 10 mtrs. |
| 3 | 15 mm internal threaded with 6 mm orfice. |
| 4 | Supply Installation Testing and Commissioning of 100 mm Dia Debris Collection Strainer in Stainless steel 304 gr Complete as reqd. All fixing to be done as per direction instruction and entire satisfaction of Engineer-in-charge. |
| 5 | Supply of Installation Testing and Commissioning of three phase openwell ISI Marked submersible pumpset of 1.5H.P. capacity suitable for operation on 415V(+-10%), 3- phase AC supply compaitable for operations on dynamic variable frequency / speed having IP 68 Protection including providing required no's of heavy duty M.S clamps made of flat iron and suitable size top cover made of suitable thick MS sheet as required.and making of flexible IP68 cable connections etc. complete of suitable head and discharge as aproved by engineeer incharge as reqd. |
| 6 | Supply of Installation Testing and Commissioning of three phase openwell ISI Marked submersible pumpset of 7.5 H.P. capacity suitable for operation on 415V(+-10%), 3- phase AC supply compaitable for operations on dynamic variable frequency / speed having IP 68 Protection including providing required no's of heavy duty M.S clamps made of flat iron and suitable size top cover made of suitable thick MS sheet as required. and making of flexible IP68 cable connections etc complete as reqd. |
| 7 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 8 | 25 mm dia |
| 9 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 10 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 11 | Supplying, fixing, Testing and Commissioning of Butterly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with Nuts, bolts, washer, gaskets confirming to IS 13095 of following sizes as required. |
| 12 | 80mm dia. |
| 13 | 100mm dia. |
| 14 | Supply of Installation Testing and Commissioning of fixing of following dia. Gun metal Horizontal Non Return valve ( screwed type ) on the existing pipeline, including testing & Commissioning etc. As required. |
| 15 | 100 mm dia |
| 16 | 50 mm dia |
| 17 | Supply of Installation Testing and Commissioning of fixing of following dia. Gun metal gate valve ( Screwed type ) on the existing pipeline, including testing & Commissioning etc. as required. |
| 18 | 50 mm dia. |
| 19 | Supply of Installation Testing and Commissioning of fixing of Power Supply/SMPS for suitable to run LED Lights, Body-Metal input Power-220 V AC/ Output Power-12 V DC, complete as per the Direction & Entire Satisfaction of engineer in charge |
| 20 | Supplying & fixing PVC insulated PVC sheathed copper conductor submersible flat cable ISI Marked in existing metal/HDPE / PVC/ pipe/ in bore well/ in sump including fixing the cable to GI/HDPE pipe with suitable cable tags of following sizes etc. as required. |
| 21 | 3 Core 2.5 Sq mm Flat Cable |
| 22 | 3 Core 6 Sq mm Flat Cable |
| 23 | Supply, Installation, Testing and Commissioning of water proof LED lights 36nos. led'sx0.5 watts having in 18volt dc, color changing RGB made out of poly glass top frame with ABS base body with protection class of IP-68 complete as required. |
| 24 | Supply, Installation, Testing and Commissioning of DCC Master Control Device for LED Lights having Specifications:- * PIC based controller with master & slave communication protocol.* Push feature to lock any running colour chase to a fix colour.*24 Pre-Programmed colour patterns and Load Circuit- Inbuilt with accessories, Body - Plastic/PVC, Output Power - 18V DC complete as required. |
| 25 | Supply, Installation, Testing and Commissioning of 1.00 Mtr. Long Diffusers in 50mm dia. Pipe size in Stainless Steel 304Grade for Waterfall effect having 50mm dia. 1 no. socket for inlet complete as required. |
| 26 | Supply, Installation, Testing and Commissioning of 7.20 Mtr. Long Linear Header Line in 80mm dia. Pipe size GI B Class having provision with 72 nos.15 mm dia. sockets and 80mm dia. 2 nos. socket for inlet complete as required. |
| 27 | Supply, Installation, Testing and Commissioning of adjustable stainless steel stand (SS-304) for LED lights with all accessories including nuts bolts complete as required. |
| 28 | Supply, Installation, Testing and Commissioning of PVC INSULATED & FRLS MULTI CORE Round Sheathed Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:2010 complete as required. |
| 29 | 4 core x 2.5 sq mm size |
| 30 | Supply, Installation, Testing and Commissioning of water Proof joint of underwater cables for submersible cable complete as required. |
| 31 | Supply, Installation, Testing and Commissioning of UPVC pipes of confirming to IS 4985:2000 including all UPVC fitting i/c jointing with good quality solvent of following sizes complete as required. |
| 32 | 110 mm OD Pipe for Delivery Lines |
| 33 | 90 mm OD Pipe for Delivery Lines |
| 34 | 50 mm OD Pipe for Delivery Lines |
| 35 | 32 mm OD Pipe for Delivery Lines |
| 36 | Supply, Installation, Testing and Commissioning of Fordged Brass Ball Valve complete as required. |
| 37 | 25 mm Dia. |
| 38 | 40 mm Dia. |
| 39 | Supply, Installation, Testing and Commissioning of out door type control panel suitable for fountain equipment including wiring, cabling, cable tray control wiring etc. The control panel shall be compartalized for individual outgoing and shall be made out of 16 SWG CRC sheet in grey color and shall be floor mounted with following, Size 1000(L)x750(B)x300(H). (for 7.5 HP Pump - 3 nos.)(for 1.5 HP Drain Pump - 1 no.) (a) 4 Pole MCCB 125A 1.00 no. (b) 3 Pole MCB 32Amps 4.00 nos. (c) DOL Pump Starter 7.5HP / 3 Phase 3.00 nos. (d) DOL Pump Starter 1.5HP / 3 Phase 1.00 no. (e) DP MCB 20 Amp. 4.00 nos. (f) Volt selector switch 1.00 no. (g) Voltmeter 0-500 v 1.00 no. (h) Digital Time Switch - 2.00 nos. (i) Indicators - 1.00 Set (j) MS Panel Stand - 1 no. |
| 40 | Supply, Installation, Testing and Commissioning of Stainless Steel 304grade sump cover having size of 2000mmx1500mm including cutting fixing/welding complete as required. |
| 41 | Supply, Installation, Testing and Commissioning of Manifold made out of Jindal B Class in size of 150mm Dia and 1000 mm in Length complete as required. |
| 42 | Supply, Installation, Testing and Commissioning of 25mm dia. Universal Ball Joints made out of Brass with Chrome plated body to fix the geyser jet nozzle complete as required. |
| 43 | CIVIL WORK Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and forall lift, as directed by Engineer-in-charge. All kinds of soil |
| 44 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources:4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 45 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:1.5:3 (1 cement: 1.5coarse sand (zone-III) derived from natural sources:3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 46 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 47 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. |
| 48 | For vertical surface two coats @ 0.70 kg per sqm |
| 49 | For horizontal surface one coat @1.10 kg per sqm. |
| 50 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut forkitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement:4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red, Area ofslab upto 0.50 sqm |
| 51 | CEMENT PLASTER (IN COARSE SAND) 12 mm cement plaster of mix : (a) 1:4 (1 cement: 4 coarse sand) |
| 52 | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: |
| 53 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 54 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and forall lift. |
| 55 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in-Charge. (a) 32 mm nominal outer dia Pipes |
| 56 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore |
| 57 | Supply and Fixing of Modern Exterior Natural Stone Cladding Tiles for fountain complete as requied. |
| 58 | Modified Estimated Cost after using Correction factor on DSR 2023 on account of GST @ 0.973 (as per Office Memorandum 158/SE (TAS)/GST/2024/02-E dated 08.08.2024) (Item No. 26 to 37) Please Enable Macros to View BoQ information |
