|
| 1 | Dismanteling pucca brick or lime work including , serviceable materials in countable stacks within 15 M lead and disposal of unserviceable material with all leads all complete as per directed by E/I |
| 2 | Dismantling R.C.C. Work including stackng servieable materials in countable stacks within 15 metre lead and disposal of unservieable marerials with all leads all complete as per direction of E/I |
| 3 | Earth in Excavation in Foundatio in ordinary soil (Vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50M.including all lifts, leveling, ramming the foundation trenches, removing, building specificstion and direction of E/I |
| 4 | Extra for earth work in hard Soil as per Specification and direction of E/I(vide classification of Soil Item- B). |
| 5 | Filling in Foundation trenches and plinth in layers not exceeding 150mm thick well-watered rammed, fully compacted & fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M lift of 1.5 Mall complete as peer building specification and direction of E/I (mode of measurement compacted volume). |
| 6 | Providing Coarse Clean sand in filling in foundation trenches or plinth including ramming & watering in layers not exceeding 150mm thick with all leads and lifts including cost of material Labour, taxes and royalty all complete as per building specification and direction of E/I. ( mode of measurement compacted volume). |
| 7 | Providing designation 75A one Brick flat joints filled with local sand including cost of watering taxes ruyalty all complete as per building specification and direction of E/I. |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shutting-All work upto plinth level. 1:2:4 (1 cement:2 coarse sand (zone-III) :4 graded stone aggregate 20 mm nominal size) |
| 9 | Centering and shuttering including strutting, propping etc and removal of from for foundations , footings, bases of columns etc for concrete. |
| 10 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement. All work up to plinth level |
| 11 | Centering and shuttering including strutting, propping etc and removal of from forLintels, beams, plinth beams etc for concrete. |
| 12 | Reinforced cement concrete work in beam,suspended floors,roofs having slope 15 degree landing,balconies,shelves,chujjas, lintels,band,plain windows sills,stair cases and spiral stair cases above plinth level upto floor five level,excluding the cost of centering,shuttering,finishing and reinforcement,with 1:1.5:3 (1 cement:1.5 coarse sand(zone-III) :3 graded stone aggregate 20 mm nominal size). |
| 13 | Providing and laying cement concrete in retaing wall,return walls, walls ( any thickness) including attached pilasters,columns,piers,abutment,pillars,posts,stuts,buttresses,string or lacing courses, parapets,copping bed blocks,anchore block,plain windows sills,fillets.sunken floor etc. up to floor five level excluding the cost of centering,shuttering and finishing grade of reinforced cement concrete in Columns, excluding the cost of centering, shuttering, finishing and reinforcement. All work up to plinth level |
| 14 | Providing Designation 75B brick work in C.M (1:6) in super structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick. mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete as per building specification and direction of E/I. Deduct |
| 15 | Providing 12mm thick. Cement plaster (1:6) on walls with clean coarse sand of F.M. 1.5 including screening, curing with all leads & lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.Top |
| 16 | Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the direction of E/I |
| 17 | Providing Tor steel reiforcement of 8mm. 10mm, 16 mm& 20mm dia. Bars as per approved design and drawing excludinjg carriage of M.S. bars to work site, cutting, bendig and binding wiith annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 18 | Supplying and fixing Angle post and Strut of required size including bottom to be split and bend at right angle in position direction for 10 cm length and drilling holes upto 10 mm dia,complete |
| 19 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia. 10 metre openable length (total length 90 m) having 50 nos round per 6 metre length upto 3 m height of wall with existing angle iron Y Shaped placed 2.4 m or 3 mTr apart and with 9 horizontal R.B.T. reinforced barbed wire stud tied with G.I steples and G.I clips to retain horizontal,including necesary bolts or G.I. barbed wire to angle iron all complete as per direction of E/I with reinforcment barbed tape (R.B.T) spring core (2.5 mm thick) and weight 43.478 gm/ metre (Cost of M.S Angle C.C. blocks shall be paid separately. |
| 20 | Supplying,fiting and fixing M.S.grill gate with M.S. grills made of 20x6mm M.S. flats or 16mm M.S. square bars fitted on 25x25x6 mm M.S. Angle frame including cost of fabrication, providing necessary locking arrangement with haskal and dommy duty fixed in P.C.C. (1:2:4) blocks of required size ,applying a priming red lead paint over steel work taxes all complete as per draewing specification and direction of E/I |
| 21 | Providing two coats of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface thoroughly,scaffolding and taxes, all complete as per building specification and direction of E/I. |
| 22 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly,scaffolding and taxes, all complete as per building specification and direction of E/I. |
| 23 | Providing and laying factory made chamfered edge cement concrete paver block in foothpath,lawns,park,drive way or ligth traffic parking etc. or required strength.thickness and size/shape.made by table vibratory method using PU mpuld/laid in required colour and pattern over 50 mm thick compacted bed of sand,compacting and proper embedding laying pf inter locking paver block into the sand bedding layer through vibratory compaction by using plate blocks vibrator,filling the joints with sand and cutting of paver blocks as per required size and pattern,finishing and sweeping extra sand,complete all as per direction of E/I 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern |
| 24 | Carriage of materialsBricks -Lead 6 km |
| 25 | Cement -Lead 10 Km |
| 26 | Steel - Lead 10Km |
| 27 | Sand Lead 20 Km |
| 28 | Stone Chips Lead 25 Km |
| 29 | Providing designation 75B one brick flat soling joint filled with local sand including cost of watering. |
| 30 | Providing and laying in position ( P.C.C) M-75 cement concrete of specified grade excluding the cost of centering and shutting-All work upto plinth level. |
| 31 | Making plinth protection 50 mm thick of cement concrete (1:3:6) (1 cement:3 coares sand:6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size,well remmed and consolidated and grouted with fine sand,including necessary excavation.levelling and dressing and finishing the top smooth. |
| 32 | Providing 250 mm wide brick drain in cement mortar (1:6) with av. 150 mm clear depth and 250 mm apron including cost of earth work involved with 75 mm cement cocrete (1:4:3) over one brick designation 75 A,flat soling in proper grade and slope at the base the drain duly plastered in C.M (1:3) with punning over exposed surface all complete as per building specification and direction of E/I |
| 33 | Reinforced cement concrete work in wall (any thickness),including attached pilasters,buttresses,plinth and string course,fillets,Coloumns,pillars,piers,abutments,post and struts etc. above plinth level upto floor level,excluding cost of centering,shuttering,finishing and reinforcement. 1:1.5:3 I1 cement:1.5 coarse sand(zone-III),:3 graded stone aggregate 20 mm nominal size) |
| 34 | Centering and shutterin including Columns,Pillars,Piers,Abutments,Posts and Struts |
| 35 | Providing Tor steel reiforcement of 8mm. 10mm, 16 mm& 20mm dia. Bars as per approved design and drawing excludinjg carriage of M.S. bars to work site, cutting, bendig and binding wiith annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 36 | Providing two coats of snowcem paint of approved shade and make over new surface including cost of cleaning surface thoroughyy and removing the scales of smoke and moss marks with jhama rubbing, scaffolding, washing, of floors and taxes all complete as per building specification and direction of E/I. |
| 37 | Structural steel work in single section fixed with or without connecting plates, , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 38 | Providing corrugated G.S. sheet rofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. Limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces) exclding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/Sqm |
| 39 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J OR L hooks,bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete.0.80 mm thick with zinc coating not less than 275 gm/Sqm |
| 40 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing , cleaning and paspering the walls, scaffolding, washing of floors and taxes all complete as per building specifications and direction of E/I. |
| 41 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 42 | Providing two coats of oil bond distemper of approved shade and make over old surface including washing , cleaning and paspering the walls, scaffolding, washing of floors and taxes all complete as per building specifications and direction of E/I. |
| 43 | Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 44 | Dismantling old plaster and pointing bathroom tiles in cement or lime and raking out joints to 15mm depth watering and disposal of unserviceable materials-do-do-all complete job as per direction of E/I. |
| 45 | Providing and laying 300X300 mm Size Ceramic Floor tiles - do -do all complete job as per direction of E/I. |
| 46 | Providing and laying 6 mm thick precast white glazed tiles all complete job as per direction of Engineer in charge. |
| 47 | Providing and fixing false ceiling at all height including providing and fixing of frame work of special section,power pressed from M.S. Sheets and galvanized with zing coating of 120 grm/sqm (both side inclusive) as per IS:277 and cosisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm,at 1200 mm centre to centre,one flange fixed to the ceiling with dash fastener 12.5 mm dia. x 50 mm long with 6 mm dia. bolts,other flange of cleat fixed to the angle hangers of 25x10x0.05 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermadiate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm,at 450 mm centre to centre shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia.x230mm long G.I. wire at every junction,including fixing perimetre channel 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,with 25 mm long dry wall screws @ 230 mm interval,including jointing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm centre to centre,including jointing and finishing to a flush finish of tapered and squarw edges of the board with recommended jointing compound,jointing tapes,finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of perier suitable for board,all as per manufacture's specification and also including the cost of making opennings for light fittings,grills,diffusers,cutouts made with frame of perimeter channels suitably fixed all complete as per drawings,specification and direction of the E/I but excluding the cost of painting with: 12.5 mm thick square edge PVC laminated gypsum tile of size 595x595 mm,made of Gypsum plasterboard manufactureed from natural gypsum as per IS 2095 part-I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges are is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. |
| 48 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick |
| 49 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper , applying putty wherever required , scaffolding washing of floor and taxes all complete as per building specification and direction of E/I |
| 50 | Providing primer one coat of red lead paint of approved make over steel surface including preparing the surface after cleaning removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification direction of E/I |
| 51 | Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Fire retardant plywood conforming to IS: 5509 |
| 52 | Description Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section |
| 53 | ROLLER BLINDS -Providing and fixing of roller blinds at windows area with blackout materials for projecter clear view including of all necessary hardware and fittings such as braket, roller blinds main rod and clipetc.area Curtain |
| 54 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. Complete |
| 55 | Providing and fixing in wall Cabinet book shelves lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete25 mm thick retardant |
| 56 | Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge 202 SUB HEAD : 9.0 WOOD AND P .V .C. WORK Code Description Unit Rate No. side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in- charge. Decorative finish (both side wood grained finish) |
| 57 | WOODEN FLOORING -Providing & fixing in wood flooring with planks of sizes 14 mm thick, 1800 mm length (minimum) and 130 mm wide (minimum) in approved colour, texture and finish having performance Appraisal certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4 mm thick expanded polyethylene foam sheets having density 40 Kg./Cum, over prepared surface with necessary quarter round planks of size 1900 mm x18 mm and door reducer of size 1900 mm x 44 mm, wherever required. The bamboo wood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. With Eco friendly UV coating all complete as per direction of the Engineer-in-charge |
| 58 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 59 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : 17.6.1 Single squatting plate with 5 litre P.V.C. automatic flushing cistern |
| 60 | Supply special bath fittings-do-do-all complete job as per direction of E/I.a)Bib Cock |
| 61 | Stop Cock |
| 62 | Shower rose |
| 63 | Towel Rail |
| 64 | Soap dish |
| 65 | Glass Self |
| 66 | Mirror |
| 67 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern |
| 68 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 69 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm dia |
| 70 | 25 mm dia |
| 71 | 32 mm dia |
| 72 | 50 mm dia |
| 73 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVCplain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing ofjoints complete as per direction of Engineer in Charge.15 mm dia |
| 74 | Point wiring in PVC conduit with piano type switch:- Wiring for light point/exhaust fan point/call bell point with 1.5Sq.mm FRPVC insulated copper conductor single core cable in surface/recessed PVC conduit with Piano type switch,Phenolic laminated sheet,suitable size PVC/G.I.box etc.as required.Group –C |
| 75 | Twin control point wiring in PVC conduit with Modular type switch:- Wiring for twin control light point with 1.5Sq.mm FRPVC insulated copper conductor single core cable in surface/recessed PVC conduit, 2way Modular type switch,phenolic laminated sheet sheet,suitable size PVC/G.I.box etc.as required. |
| 76 | Power plug wiring in PVC conduit(2x4Sq.mm) Wiring for light/power plug with 2x4Sq.mm FRPVC insulated copper conductor single core cable in surface or in recessed PVC conduit along with 1No4Sq.mm FRPVC insulated copper conductor single core cable for loop earthing etc. as required. |
| 77 | Circuit/submain wiring PVC conduit:- Wiring for circuit/submain withing along with earth wire with the following sizes in PVC insulated copper conductor single core cable in surface/ recessed PVC conduit as required.2x1.5Sqw.mm+1x1.5Sq.mm earth wire |
| 78 | 5/6Amp one way switch |
| 79 | Step Fan regulator |
| 80 | 3 pin 5 Amp Socket Outlet |
| 81 | 15/16 Amp S.S. combined |
| 82 | S/F light plug point with piano type Accessories:- Supplying and fixing suitable size modular type G.I./PVC box on surface or in recess with phenolic laminated sheet cover infront including providing and fixing 5Pin 5/6Amp socket outlet and 5/6Amp piano type switch connection, painiting etc.as required |
| 83 | S/F light plug point with piano type Accessories:- Supplying and fixing suitable size modular plate G.I./PVC box on surface or in recess with phenolic laminated sheet cover infront including providing and fixing 6Pin 15/16Amp modular socket outlet and 15/16Amp modular type switch connection, painiting etc.as required. |
| 84 | Installation Testing and commissioning of pre-wired fluorescent fittings/ compact fluroescent fitting all type complete with all accessoires and tubes etc.directly/wall including connection witgh 1.5Sq.mm FRPVC insulated copper conductor single core cable and earthing etc.as required. |
| 85 | Cassate A.C.-2.0 T : supply installation testing and commissining of 2.0 TR, 230 V, 50 HZ Cassate air conditioner 3 star rating. Make Hitahi/Blue Star/Daikin/Voltas. |
| 86 | Outdoor cassate stand : supply and installation of mtal braket angle stand for out door unit of cassate AC. |
| 87 | Copper refrigerant piping : Hard drawn suction line 1.325\\" (1\\" + 3\\"/8) with insulation + liquidine 0.875\\" (7\\"/8) |
| 88 | PVC Drainline 1\\" : supply and installation of 1\\" hard PVC drainline for indoor unit of Cassate AC. |
| 89 | Cu Control cable (3C X 1.5 Sq.mm) : supply, creation and commissioning of armoured cu control cable 3 core x 1.5 sq.mm for connection in between outdoor unit to indoor unit( cassate AC). |
| 90 | Supply and installation of wall fan 24\\" (600 mm) |
| 91 | Supplying, fitting and fixing and testing of 12\\" (230 mm) metal exhaust fan. |
| 92 | Double LED light 2x 20 watt. |
| 93 | Supplying and fixing of cecess mounted LED panel light - 16/18 W |
| 94 | GST@18% |
| 95 | Labour Cess@1% Please Enable Macros to View BoQ information |
