Tender For Annual Maintenance Plan-I For The Year 2026-27 On Renuka Sataun Road Km. 0/00 To 13/450,Dalyanoo Gatta Mandwatch Road Km. 0/00 To 12/00,Mothu To Lana Mashoor Road(Magwa Siun) Km. 0/00 To 16/015 & Haripurdhar Kupvi Road Km. 0/00 To 6/500 Vr, Sangrah-Himachal Pradesh
TDR : 54544661
Tender Notice
BOQ
Expired
Sangrah
Himachal Pradesh
Tender For Annual Maintenance Plan-I For The Year 2026-27 On Renuka Sataun Road Km. 0/00 To 13/450,Dalyanoo Gatta Mandwatch Road Km. 0/00 To 12/00,Mothu To Lana Mashoor Road(Magwa Siun) Km. 0/00 To 16/015 & Haripurdhar Kupvi Road Km. 0/00 To 6/500 Vr
Name of Work:- Annual Maintenance Plan-I for the year 2026-27 On Renuka Sataun Road Km. 0/00 to 13/450,Dalyanoo Gatta Mandwatch Road Km. 0/00 to 12/00,Mothu to Lana Mashoor Road(Magwa Siun) Km. 0/00 to 16/015 & Haripurdhar Kupvi Road Km. 0/00 to 6/500 VR Road (Non PMGSY)(SH: Repair of pot holes and 30mm thick bituminous concrete on Renuka Sataun Road Km. 2/00 to 4/00, Dalyanoo Gatta Mandwatch Road Km. 8/00 to 9/00& 11/00 to 12/00,Mothu to Lana Mashoor Road(Magwa Siun) 0/00 to 1/00 Bitumenous Concrete 30 mm thick using plastic based road =1.000 km & 4/00 to 7/00 30mm thick bituminous concrete & Haripurdhar Kupvi Road Km. 0/00 to 2/00 & 5/00 to 6/500 =12.500 kms.
Sl. No.
Item Description
1
Providing Laying,spreading and compacting stone aggregate of specific sizes to water bound macadam specifcation including spreading in uniform thickness,hand packing rolling with 3-wheeled static roller 8-10 tonnes in stages to proper grade and camber applying and brooming crushable screening/ binding materials to fill up the interstices of coarse aggregate,watering and compacting to the required density Grading 3 as per techical specification clause 405 by Mechanical means including haulage of material within all leads,lifts and carriage of materials and as per direction of Engineer-in-Charge. WBM Grading- 111.
2
Providing and applying primer coat with Bitumen emulsion (SS-I) grade on the prepared surface of granular base including cleaning of road spraying primer @ 0.70-1.0 kg/sqm using mechanical means as per technical specification clause 502.including haulage of material within all leads,lifts and carriage of materials and as per direction of Engineer-in-Charge.
3
Tack Coat Providing and applying tack coat with Bitumen emulsion ( RS-1) using emulsion distributor @ 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer and cleaned with hydraulic broom as per Technical specification Clause 503 including haulage of material within all leads,lifts and carriage of materials and as per direction of Engineer-in-Charge.
4
Providing and laying 30 mm thick bituminous concrete with 100 -120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler,i.e 129.50Kg per cum as per job mix formula along with addtion of anti striping agents i.e Zycotherm @ 0.11% of bitumen transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade,level and alignment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respect Including haulaging/carriage of all labours,equipments and materials to various location through all mode of transporations in all leads,lifts to the entire satisfaction and diection of the Engineer-in-charge.
5
Providing and laying plastic waste bituminous concrete 30mm (Thirty milimetre thick) with 100-120 (one hundred to one hundred twenty )TPH batch type hot mix plant with producing an average output of 75 (Seventy five) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder including waste plastic @ 5.50(Five point five zero) percent (5.06% bitumen & 0.44% Waste plastic) of mix filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 . all leads,Lifts and carriage of materials complete as per entire saisification of the Engineer in Charge.
6
Providing and laying hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sqm area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35 the finished surface to be levelled uniform and free from streaks and holes complete in all respects.(on valley side) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
