|
| 1 | Excavation work of all kind of soil by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils within all lead and lifts as per the diretion of Engineer in Charge at site. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 4 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. Tata/Sail/Jindal Panther/Shyam steel or as approved by Engineer-In-Charge. |
| 7 | Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 8 | Providing and fixing 15 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes Supreme, Finolex, Vectos, Prince or equivelent make having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 9 | Providing and fixing 20 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes Supreme, Finolex, Vectos, Prince or equivelent make, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 10 | Providing and fixing 15 mm dia nominal bore G.I. pipes Tata, Jindal (Hisar) or equivalent make (heavy duty) complete with G.I. fittings including trenching and refilling etc as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 11 | Providing and fixing 20 mm dia nominal bore G.I. pipes complete Tata, Jindal (Hisar) or equivalent make (heavy duty) with G.I. fittings including trenching and refilling etc as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 12 | Providing and fixing 25 mm dia nominal bore G.I. pipes complete Tata, Jindal (Hisar) or equivalent make (heavy duty) with G.I. fittings including trenching and refilling etc as per direction of Engineer- In-Charge including carriage of materials within all leads, lifts and heights. |
| 13 | Providing and fixing 32 mm dia nominal bore G.I. pipes complete Tata, Jindal (Hisar) or equivalent make (heavy duty) with G.I. fittings including trenching and refilling etc as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 14 | Providing and fixing 40 mm dia nominal bore G.I. pipes complete Tata, Jindal (Hisar) or equivalent make (heavy duty) with G.I. fittings including trenching and refilling etc as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 15 | Providing and fixing 20 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. Leader, Zoloto, Kilburn, Sent or equivalent make |
| 16 | Providing and fixing 25 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. Leader, Zoloto, Kilburn, Sant or equivalent make |
| 17 | Providing and fixing 32 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. Leader, Zoloto, Kilburn, Sant or equivalent make |
| 18 | Providing and fixing 15 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. Leader, Zoloto, Kilburn, Sant or equivalent make |
| 19 | Providing and fixing 20 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. Leader, Zoloto, Kilburn, Sant or equivalent make |
| 20 | Providing and fixing 25 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. Leader, Zoloto, Kilburn, Sant or equivalent make |
| 21 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. Nerolac, Asian or equivalent make |
| 22 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank Sintex or equivalent make, IS : 12701 marked as approved by the Engineer-In-Charge, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of materials within all leads, lifts and heights. Please Enable Macros to View BoQ information |
