|
| 1 | Erection of DTR and LT Line |
| 2 | 11/0.4 KV 63 kVA Distribution Transformer |
| 3 | G.O.Switch 400 Amp. |
| 4 | D.O.Fuse unit |
| 5 | Lightning Arrestors 9 kV 5 kA Porcelain type |
| 6 | LT Distribution Panel Box with MCCB 100 Amp. For 63 kVA DTR |
| 7 | Pipe Earthing |
| 8 | M.S. Nuts and Bolts (Off Sizes) |
| 9 | A. Thimble |
| 10 | A. Thimble 95 mm2 |
| 11 | Danger Plate |
| 12 | Barbed Wire |
| 13 | LT Cable 3.5x120 mm2 (Havells MR with 30% Discount) |
| 14 | LT Cable 3.5x70 mm2 (Havells MR with 30% Discount) |
| 15 | AAAC 7/3.15 mm 50mm2 conductor for earthing, connections. |
| 16 | Prov. Energy meter LT 3-Phase 4 wire (100/5A) |
| 17 | Civil work i.e Chain Link Fencing, Angle Iron, Gate etc. of Transformer fencing |
| 18 | Add Erection Charges i.e. Erection of Transformer, LT Panel, Energy Meter, Erection of LT Cable & Dismantling of old Transformer and carriage to the Divisional Store |
| 19 | Add Transportation Charges |
| 20 | Steel Tubular Pole 8 Mtr. Long |
| 21 | RCC Muff |
| 22 | Prov. Shackle insulator with D-Iron |
| 23 | Prov. Egg Insulator |
| 24 | Prov. Eye Hook Bolt |
| 25 | LT Earthing Complete |
| 26 | LT Stay Set Complete |
| 27 | Stay Wire 7/3.15mm @ 6.0Kg.Per Stay Set |
| 28 | Prov. G.I wire 8 SWG |
| 29 | Prov. AAAC 7/3.15 mm (55mm2) |
| 30 | Prov. Energy Meter LTAC Three Phase kWH meter (10-60 A) |
| 31 | Prov. LT cable 3.5C 35 mm2 Havells MR with 30% discount |
| 32 | Prov. Full Clamp |
| 33 | M.S Nuts & Bolts (off sizes) |
| 34 | Prov. Aluminium Paint |
| 35 | Add Dismantling charges of off size conductor i.e de-string removal of conductor from insulator and rolling of conductor for 0.250x4=1.0 km + 0.390x2=0.780 kmtr |
| 36 | Add Erection charges of AAAC 7/3.15 mm sq i.e string & sagging, binding with insulator for 0.940x4=3.760 km |
| 37 | Add Erection charges of ST Pole 8 Mtr. Long |
| 38 | Add Erection charges of LT Stay Set |
| 39 | Add Erection charges of Earthing Set |
| 40 | Add Erection charges of G.I wire 8 SWG for 0.940 km |
| 41 | Add Erection charges of LT cable 0.070 mtr |
| 42 | Add Transportation Charges |
| 43 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 44 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 45 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required(Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 46 | Providing and fixing aluminium work for doors, windows,board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. |
| 47 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge . With float glass panes of 4.0 mm thickness weight not less than 10.00 kg /sqm |
| 48 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading. |
| 49 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge. (Only weight of grill to be measured for payment). |
| 50 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 51 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm |
| 52 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 53 | P/F aluminium tower bolts ( berrel type) anodised transparent or dyed to required shade and colour with screws etc. complete For Windows (150*10mm) |
| 54 | Providing and fixing bright finished hard drawn hooks and eyes 150 mm |
| 55 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Sal wood |
| 56 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. Second class teak wood 35mm thick shutters. |
| 57 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 35mm thick shutters with ISI marked stainless steel butt hinges of required size Second class teak wood. |
| 58 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
| 59 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore |
| 60 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 61 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter. |
| 62 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in Charge. With cement mortar 1:4 (1 cement : 4 fine sand). Please Enable Macros to View BoQ information |
