|
| 1 | NS Item -Horse Rider Station : Providing, designing and fixing of Horse Rider Statin of size 1200x4600x1300mm fabricated with main post of 140mm dia and other pipes of 50 mm dia and 42mm and 32mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick . |
| 2 | NS Item -ANALYSIS OF RATES FOR PROVIDING AND FIXING OF RUBBER HOSE PIPE 1” DIA DOUBLE THREADED and DOUBLE PLY 1ST MARKED and KG.1/CM/2 |
| 3 | NS Item -Chain Swing two seater: Providing designing and fixing of chain swing two seater of size 3100x1780x2440mm fabricated with main post of 60mm dia and 3.00 mm thick and other pipes of 25 mm dia with 2.5 mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized with 8 mm gl chain and powder coated using AKzo Nobel or equivalent of 100-130 micron thick. |
| 4 | NS Item -Exercising Bar : Providing, designing and fixing of Exercising Bar pair of size 1820x620x1700 mm fabricated with main post of 140mm dia and other pipes of 42 mm dia and 40x60 mm dia 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick . |
| 5 | NS Item -Elliptical Exerciser : Providing, designing and fixing of Elliptical Exerciser pair of size 1000x560x1600 mm fabricated with main post of 140mm dia and other pipes of 60 mm dia and 42 mm dia and 32 mm dia and 94mm x 47 mm dia and 40x60mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100- 130 micron thick |
| 6 | NS Item -Twister: Providing, designing and fixing of Twister of size 1500x1500x1450 mm fabricated with main post of 140mm dia and other pipes of 60mm dia and 50mm and 32mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick |
| 7 | NS Item -Seated Chest : Providing, designing and fixing of Seated Chest pair of size 1730x760x2200 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 60 mm dia and 50mm dia and 42mm dia and 32 mm dia and 40x60 mm dia 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick |
| 8 | NS Item -Arm wheel : Providing, designing and fixing of Arm wheel pair of size 1100x800x1730 mm fabricated with main post of 140mm dia and other pipes of 60 mm dia and 32 mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick . |
| 9 | NS Item -Leg Press : Providing, designing and fixing of Leg Press pair of size 1940x520x1450 mm fabricated with main post of 140mm dia and other pipes of 60 mm dia and 32 mm dia and 40x60 mm dia 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100- 130 micron thick . |
| 10 | NS Item -Pull chair : Providing, designing and fixing of Pull chair pair of size 1920x760x1950 mm fabricated with main post of 140mm dia and other pipes of 60 mm dia and 50 mm dia and 42 mm dia and 32mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick . |
| 11 | NS Item -Double Cross Walker: Providing, designing and fixing of Double Cross walker of size 1600x560x1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 60 mm dia and 50mm dia and 32mm dia and 40x60 mm dia 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick |
| 12 | NS Item -Air Walker : Providing, designing and fixing of Air Walker of size 1140x450x1560 mm fabricated with main post of 140mm dia and other pipes of 42 mm dia and 40x60 mm dia 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick . |
| 13 | NS Item -knee Chair: Providing, designing and fixing of of knee Chair size 650x600x1000 mm fabricated with main post of 140mm dia and other pipes of 60mm dia and 50mm dia and 32mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, andpowder coated using Akzo Nobel or equivalent of 100-130 micron thick |
| 14 | NS Item -Air Swing: Providing designing and fixing of Air Swing pair of size 1200x900x1580 mm fabricated with main post of 140mm dia and other pipes of 50mm dia and 40x60mm dia 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick . |
| 15 | NS Item -Sit Up Station: Providing, designing and fixing of sit up station pair of size 1350 x1370x 700 mm fabricated with main post of 140mm dia and other pipes of 50mm dia and 32 mm dia 3.2 mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick . |
| 16 | NS Item -Stair stepper : Providing, designing and fixing of Stair stepper pair of size 900x900x1580 mm fabricated with main post of 140mm dia and other pipes of 60 mm dia and 50 mm dia 32mm and 40x60mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick . |
| 17 | NS Item -Rowing Machine: Providing, designing and fixing of of Rowing Machine size 1350x800x900 mm fabricated with main post of 140mm dia and other pipes of 50mm dia and 42mm dia and 32mm dia and 40x60mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick |
| 18 | NS Item -MGR : Providing, designing and fixing of MGR fabricated with main post of 88 mm dia and 3.00 mm thick and other pipes of 27 mm dia with 2.5 mm thickness all pipes and powder coated using Akon Nobel or equivalent of 100-130 micron thick. |
| 19 | NS Item -Standing Sea Saw : Providing , designing and fixing of standing sea saw fabricated with main post of 88 mm dia and 3.00 mm thick and other pipes of 27 mm and 32mm dia with 2.5 mm thickness all pipes/ms part made up of hot rolled tubular steel and powder coated using Akzo Noble or equivalent of 100-130 micron thick. |
| 20 | NS Item -Sea Saw: Providing: designing and fixing of standing sea saw fabricated with main post of 88 mm dia and 27 mm and 32 mm dia with 2.5 mm thickness all pipes/ ms part made up of hot rolled tubular steel and powder coated using Akzo Nobel or equivalent of 100-130 micron thick. |
| 21 | NS Item -Multi Play activity Station : Covering Area:- 30` L x 18` W it contain:- 1 No. FRP Spiral Slide 5mm thick incline at 5` H ,1No. FRP Tube slide incline at 5` H , 1 No. FRP Wave slide 5mm thick incline at 5` H , 1 No. FRP slide 5mm thick with 1 No. FRP Entry Gate incline at 3` H . 1 No. FRP Stair 3mm thick inclined at 3` H , 2 No. FRP Platform Hex Shape 5mm thick in 7` Dia. |
| 22 | NS Item -Analysis of rate for providing and fixing of water supply connection without road cut in the parks/green belt. |
| 23 | NS Item -Bridge Ladder : Providing , designing and fixing of Bridge Ladder fabricated with main post of 88 mm dia and3.00 mm thick and other pipes of 32mm and 25 mm dia with2.5 mm thickness all pipes and powder coated using Akzo Noble or equivalent of 100- 130 micron thick . |
| 24 | NS Item -Analysis of rate for providing and fixing of water supply connection with road cut in the parks/green belt. |
| 25 | HSR Item 26.9.3-Turfing lawns with fine grassing ( selection no.1/ Bermuda and Mexican/Neelgiri grass )including ploughing, dressing including breaking of clods, removal of rubbish, dressing and supplying of selection no. 1 / Bermuda doob grass and Mexican/Neelgiri grass roots, including supplying and spreading of farmyard manure at the rate of0.60 cum per 100 sqm, maintenance till weed free turf is formed 3. Planting selection no. 1 grass roots in rows 10 cm apart in both directions .HSR Rate(Rs.) 32.00 Through Rate |
| 26 | HSR Item 26.14-`Supplying and planting in prepared pits and watering, healthy , vigorous growing , permanent trees including ,application of 10 ml chlorpyriphos 20% EC, planting desired disease free, 200 cm to 220 cm height ,5 cm to 6 cm calliper size stem , full of foliage ornamental tree saplingeach to be supplied in 30cm x 30cm poly bags,`HSR Rate(Rs.) 157.00 Through Rate |
| 27 | HSR Item 2.RM079- RM079. Earth Cost or compensation for earth taken from private landHSR Rate(Rs.) 18.00 Rate |
| 28 | HSR Item 26.15.1-Maintenance of tree including fertilization, application of insecticide, watering, weeding, training, pruning,1. Maintenance of tree for one year for the 1st three years of age including weeding, hoeing , plant protection , watering from Deptt. source , application of 10 ml chlorpyriphos four times, 0.0289 cum FYM each,50 gm urea and 50 g DAP twice,replacement of casualty ,disposal of debris and other activities.etc.HSR Rate(Rs.) 391.00 Through Rate |
| 29 | HSR Item 10.29.2-Providing and laying of chequered terrazzo tiles 20 to 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : 2. Medium shade pigment using 50% white cement, 50% ordinary cementHSR Rate(Rs.) 793.00 Through Rate |
| 30 | HSR Item 10.57-Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.HSR Rate(Rs.) 535.00 Through Rate |
| 31 | HSR Item 6.29.1-Centering and shuttering including strutting, propping etc. and removal of form work for : 1. Foundations, footings, bases for columnsHSR Rate(Rs.) 155.00 Through Rate |
| 32 | HSR Item 6.8.3-Providing and laying damp-proof course with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) 3. 25 mm thick HSR Rate(Rs.) 80.00 Through Rate |
| 33 | HSR Item 26.18-Supply and planting of disease free healthy , vigorous growing more than 75 cm height permanent shrubs in already prepared pits, supplied in 25 cm x 20 cm poly bags, application of 10 ml chlorpyriphos 20% E.C. termiticide each and watering supplied through the tractor tanker.HSR Rate(Rs.) 60.00 Through Rate |
| 34 | HSR Item 20.68.1-Providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths Ductile Iron (DI) standard specials plain /flanged/ socketed confirming to IS9523-2000 with rubber ring (EPDM/SBR) joints such as tees, bends, tapers, caps etc. with in trenches in DI pipe line complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. 1. Up to 300mm diaHSR Rate(Rs.) 64.00 Through Rate |
| 35 | HSR Item 20.96.1-Drilling of 609.60mm dia bore by hydraulic rotary drilling (reverse circulation method) percussion rig according to ISI specification No. 2800-1991 (Part-I) as amended up to date and modified to extent of the specification attached with this schedule of items of work in all kinds of soils and boulders up to 125 mm dia except rocky strata including the cost of all consumable stores, fuel, oil, soil stabilizing material and transportation of rig and other accessories to the site of proposed bore and back including cost of lowering of all size of casing pipe while boring and extracting the same against earth friction etc. complete to the satisfaction of the Engineer-in-charge. 1. Drilling from 0 metre but up to 200 metre BGLHSR Rate(Rs.) 870.00 Through Rate |
| 36 | HSR Item 20.98-Providing and fixing in position suitable bail plug hook of 219.10mm/273.10mm as per IS 226 as amended up to date, including the cost of M.S. Screwed sockets etc. complete in all respects to the entire satisfaction of the Engineer-in-charge of the work.HSR Rate(Rs.) 1159.00 Through Rate |
| 37 | HSR Item 20.99-Supplying and packing graded gravel in bore well of size as per ISI 4097, as amended up to date (Grade A) and specification attached with this schedule of item of work. The gravel should be free from dust, dirt or vegetable matters. Packing to be done from the housing pipe to the bottom of liner all around in the bore and will be placed after liner and housing pipes have been lowered and suitably clamped.Thickness and size of the gravel packing will be designed and directed by the Engineer-in-charge strictly as per relevant ISI. HSR Rate(Rs.) 1391.00 Through Rate |
| 38 | HSR Item 20.100-Supplying and fixing well threaded M.S. cap for 273.10mm outer dia M.S. pipe as per ISI 226 as amended up to date to the satisfaction of the Engineer-in-charge.HSR Rate(Rs.) 580.00 Through Rate |
| 39 | HSR Item 20.104-Electric logging of tube well.HSR Rate(Rs.) 13914.00 Through Rate |
| 40 | HSR Item 6.1.2-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)HSR Rate(Rs.) 3476.00 Through Rate |
| 41 | HSR Item 20.103.1-Development of tube well according to clause 9.3 of IS: 2800-1991 (Part-I) as amended up to date and specifications attached and as directed by the Engineer- in-charge of the work including the cost of all consumable stores, fuel, oil, compressors, pumps and machinery etc. as required for the work. 1. Compressor 450cfm x 250 psiHSR Rate(Rs.) 5487.00 Through Rate |
| 42 | HSR Item 10.100.2-Cement Concrete 1:8:16 Flooring 2. Cement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth.HSR Rate(Rs.) 1863.00 Through Rate |
| 43 | HSR Item 17.60-Land Slide Clearance in soil Clearance of land slides in soil and ordinary rock by a bull-dozer D 80 A-12, 180 HP and disposal of the same on the valley side, as per technical clause 3000 of MORT&H specificationsHSR Rate(Rs.) 55.00 Material Rate |
| 44 | HSR Item 10.10.1-Providing and laying Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 1. 40 mm thick with 20 mm nominal size stone aggregateHSR Rate(Rs.) 268.00 Through Rate |
| 45 | HSR Item 10.1.1.1-Providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling. 1.1. Re-compacting excavated soil in plinth under floors, including watering, ramming, consolidating and dressing complete.HSR Rate(Rs.) 73.00 Through Rate |
| 46 | HSR Item 11.5.3-12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand)HSR Rate(Rs.) 113.00 Through Rate |
| 47 | HSR Item 11.62.2-Colour washing such as green, blue or buff to give an even shade : 2. New work (two or more coats) with a base coat of whitingHSR Rate(Rs.) 18.00 Through Rate |
| 48 | HSR Item 26.76-Providing and fixing pair of Plastic dustbins 100 litre volume each, of two different colours, for dry and wet waste, made of virgin plastic to be mounted on MS rectangular hollow section 50 x 25 x 3 mm frames pivoted on 3 MS square hollow section verticals, 1 m above ground, one 35 cm RHS welded to each vertical member at base and grouted in 180 x 40 x 30 cm 1:2:4 cement concrete.HSR Rate(Rs.) 10666.00 Through Rate |
| 49 | HSR Item 7.21.2-Brick work with common burnt clay non- modular bricks of class designation 10.5 in foundation and plinth in: 2. Cement mortar 1:6 (1 cement : 6 coarse sand) HSR Rate(Rs.) 3968.00 Through Rate |
| 50 | HSR Item 2.B0749- B0749. Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm HSR Rate(Rs.) 223.00 Rate |
| 51 | HSR Item 13.45-Welding by gas or electric plant including transportation of plant at site etc. complete.HSR Rate(Rs.) 3.00 Through Rate |
| 52 | HSR Item 9.16-Providing and fixing pressed clay tile (Mangalore tiles) of size 200mm x 125mm x 10mm on slopping roof top/ window projections with 12mm thick cement, coarse sand mortar 1:3 including cost of ridge wherever required as per approved design complete in all respect up to 4 storey or 15 Meter Height.HSR Rate(Rs.) 730.00 Through Rate |
| 53 | HSR Item 13.28-Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.HSR Rate(Rs.) 75.00 Through Rate |
| 54 | HSR Item 26.13.3-Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farmyard manure (cost of well decayed farm yard manure to be paid separately) 3. Hole 0.75 metre dia and0.75 metre deepHSR Rate(Rs.) 21.00 Through Rate |
| 55 | HSR Item 26.13.4-Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farmyard manure (cost of well decayed farm yard manure to be paid separately) 4. Hole 0.60 metre dia and0.60 metre deepHSR Rate(Rs.) 11.00 Through Rate |
| 56 | HSR Item 13.29.2-Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksHSR Rate(Rs.) 83.00 Through Rate |
| 57 | HSR Item 11.25.1-Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): 1. Flush / Ruled/ Struck or weathered pointingHSR Rate(Rs.) 79.00 Through Rate |
| 58 | HSR Item 17.8.1-Compaction 1. Extra for laying earth/fly ash as per specifications in 20 cm layers and dressing but excluding the cost of rollingHSR Rate(Rs.) 48.00 Through Rate |
| 59 | HSR Item 7.27.2-Half brick masonry with common burnt clay non-modular bricks of class designation 10.5 in foundations and plinth in : 2. cement mortar 1:4 (1 cement : 4 coarse sand) HSR Rate(Rs.) 458.00 Through Rate |
| 60 | HSR Item 11.6.2-15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand) HSR Rate(Rs.) 127.00 Through Rate |
| 61 | HSR Item 20.10.3-Extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest Railway Station to site of works 3. 150 mm i/dHSR Rate(Rs.) 5818.00 Through Rate |
| 62 | HSR Item 20.49.1-Bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge. Size of the main with which connection is to be made. 1. Up to 200 mm internal diametreHSR Rate(Rs.) 949.00 Through Rate |
| 63 | HSR Item 20.54.4-Providing GI pipes class B marked with IS: 1239 in 3.05 m length, their threading and welding with flanges (Heavy Duty) on both sides, jointing with nuts and bolts ( ‘W’ make), rubber gaskets , lowering into Tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of Engineer-in- Charge. 4. 100 mm i/dHSR Rate(Rs.) 2177.00 Through Rate |
| 64 | HSR Item 24.5.1.4-MISCELLANEOUS ITEMS 1.4. Supply andjointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of Engineer- in-Charge.Submersible Copper Cable 3 Core 6 sqmmHSR Rate(Rs.) 143.00 Through Rate |
| 65 | HSR Item 20.11.3-Providing and fixing cast iron double flanged swing check type reflux (non return) valves PN-1.6 marked with IS:5312 including nuts and bolts marked with IS:1363, rubber sheet marked with IS:638 etc., carriage loading, unloading, stacking, handling, re-handling etc.Complete in all respect to the satisfaction of Engineer-in- charge 3. 150 mm i/dHSR Rate(Rs.) 5746.00 Through Rate |
| 66 | HSR Item 26.1-Supplying and stacking at site of work well- decayed farm-yard manure from any available source, approved by the Engineer-in-charge including screening through sieve of I.S.designation 16 mm with 5 km lead.HSR Rate(Rs.) 546.00 Through Rate |
| 67 | HSR Item 20.114.5-Supplying erection, testing of fully automatic electric control panel board forT/Wells in Pump Chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Min switch of suitable range with HRC fuse, 1 no. volt meter (0 to 500 volts), 1 No.Amp. Meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification given in Schedule No. II, Including MCB, suitable, Capacitor,Wooden Box etc as per siterequirement complete in all respect. 5. 30 HP MotorHSR Rate(Rs.) 34785.00 Through Rate |
| 68 | HSR Item 20.102-Supplying and fixing 273.10mm M.S. clamp as per IS 226 as amended up to date for supplying the housing pipe supported on two girders not less than ISMB 100mm x 150mm, weight not less than 17.00 kg / m, cross section area not less than 21.67 sq. cm, flange thickness 7.00mm, web thickness 5.40mm, 2.00 m long (each) embedded in suitable foundation as approved by the Engineer-in-charge.HSR Rate(Rs.) 2319.00 Through Rate |
| 69 | HSR Item 20.106.2-Supply, testing and lowering (ERW) electric resistance welded M.S. pipes with MS threaded socket as per IS 4270 as amended up to date, duly ISI marked for housing pipe in 4 to 7 metres random length into bore well with 88.90mm of threaded ends (8 threads to an inch or 25.40 mm) manufactured out of 8mm thick MS plates with required numbers of MS socket 177.8mm with inside thread to match the pipe threads and made out of MS plate in to borehole in vertical position including cost of all tools and plants, complete in all respects to the satisfaction of Engineer- in-charge, including cost of all cutting, threading of pipe, welding, where required and all sockets. The pipe shall be painted with anti corrosive paint and covered tightly with polythene of following sizes: 2. 250x8.0mmHSR Rate(Rs.) 2722.00 Through Rate |
| 70 | HSR Item 20.107.1.5-Supply, testing and lowering of ISI marked all welded stainless steel screen (SS304) cage Type V-Wire Wound Screens in bore wells conforming to IS:8110 and compositions of material as per IS:1012, outer dia 221mm equivalent thickness required as per code, tensile load 14000 kg minimum and ring thickness as per IS code of following sizes:- 1.5. Stainless Steel Screens 250x7.3x0.50mmHSR Rate(Rs.) 7972.00 Through Rate |
| 71 | HSR Item 20.124.5-Supplying, erection, testing and commissioning of submersible pumping sets as per BIS SPECIFICATION No. 8034-1989 (as amended upto date for pumps) and IS 9283-1979 (as amended upto date for motor) the pump motor sets should be capable of pumping clear fresh cold water having characteristics as specified in Clause- 4 of IS 8034-1989 and Clause 4.1 of IS 9283-1979. 5. LPM600Head 70 BHP 15.56 Say Round BHP 15.00HSR Rate(Rs.) 53174.00 Rate |
| 72 | HSR Item 26.10-Maintenance of fine grass lawn for one year including fertilizer application, DAP @ 20gm/sqm, urea 40gm/sqm, watering, weeding, top dressing with good earth and manure mixture 2:1 @ 0.01cum per sqm, maintaining fine level, regular mowing and removal of rubbish with all lifts and leads.HSR Rate(Rs.) 45.00 Through Rate |
| 73 | HSR Item 7.20.2-Brick work with common burnt clay modular bricks of class designation 10.5 in foundation and plinth in: 2. Cement Mortar 1:6 (1 cement : 6 coarse sand)HSR Rate(Rs.) 4146.00 Through Rate |
| 74 | HSR Item 11.78-Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.HSR Rate(Rs.) 31.00 Through Rate |
| 75 | HSR Item 4.12.1-Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer- in-charge. 1. All kinds of soilHSR Rate(Rs.) 78.00 Through Rate |
| 76 | HSR Item 26.32-Planting permanent edging plants around beds, lawn or along paths including of digging of trench 45 cm wide to 15 cm depth, refilling the excavated earth, mixed with farm-yard manure, supplied at the rate of 0.9 cum per sqm and supplying and planting hedge/ edge at 20 cm apart in one or two rows @11no. well trimmed bushy ,multi branched,30 cm to 45 cm in height plants to be supplied in 15 cm x 15 cm poly bags per sqm .HSR Rate(Rs.) 97.00 Through Rate |
| 77 | HSR Item 26.58.1-Supply and installation of garden bench 1. Chair type garden bench with L-shaped sides made of reinforced concrete (M30), thickness 100 mm, overall height 1000 mm, base width 620 mm. Back and seat shall consist of 5 Nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation. All materials required to be as per BIS specifications.HSR Rate(Rs.) 4814.00 Through Rate |
| 78 | HSR Item 26.33-Maintaining the permanent edging plants for the one year including application of FYM @ 0.0289 cum,chlorpyriphos 9ml, urea and DAP 40gm each per year,watering, hoeing weeding trimming and shaping ,replacement of casualty as and when noticed.HSR Rate(Rs.) 65.00 Through Rate |
| 79 | HSR Item 3.1.2-By Mechanical Transport including loading, unloading and stacking 2. EarthHSR Rate(Rs.) 5.00 Beyond 10km up to 20km per KMApplied Note: 1.4 All distances shall be measured over the shortest practical route and not necessarily the route actually taken. Route other than shortest practical route may be considered in cases of unavoidable circumstances and as approved by Engineer-in-Charge. Please Enable Macros to View BoQ information |
