Tender For Construction Of Block Public Health Unit (Bphu) Building At Bahalda Chc Under Bahalda Block For The Year 24-25
Tender Value
67.46 Lakhs
Estimated cost
Bid Submission
24 Mar 2026
0 days left
EMD
67469
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rairangpur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Block Public Health Unit (Bphu) Building At Bahalda Chc Under Bahalda Block For The Year 24-25
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundations in hard soil with initial lead and lift including levelling and dressing with all labour T & P articles, safety measures, incidentals, necessary required for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 2 | Filling foundation and plinth with sand well watered and rammed including cost, conveyance of materials, labour T&P, royalty etc.complete as per direction of the Engineer-in-charge. |
| 3 | C.C.(1:3:6) in foundation and plinth with 4 cm size hand broken hard granite metal of approved quality from approved quarry including hoisting, lowering and laying in position in layers not exceeding 15cm thick with proper compacting the concrete by means of vibrator to proper slope and level including curing, dewatering shoring, shuttering if necessary at the time of laying concrete with cost, conveyance, royalty and taxes of all materials required for the work as per specification and direction of the Engineer-in-charge. |
| 4 | R.C.C.M-20 with 20mm and down graded size h.g. chips of approved quality from approved quarry including hoisting, laying concrete to required thickness with cost, conveyance of materials labour T&P required for the work including shuttering, shuttering watering curing and royalty etc.complete as per specification and direction of the Engineer-in-charge.Column base(Ground floor) |
| 5 | Grade beam(Ground floor) |
| 6 | Column(Ground floor) |
| 7 | Lintel(Ground floor) |
| 8 | Chajja(Ground floor) |
| 9 | Roof Beam(Ground floor) |
| 10 | Stair case(Ground floor) |
| 11 | Roof Slab(Ground floor) |
| 12 | Column(1st floor) |
| 13 | Lintel(1st floor) |
| 14 | Chajja(1st floor) |
| 15 | Roof Beam(1st floor) |
| 16 | Stair case(1st floor) |
| 17 | Roof Slab(1st floor) |
| 18 | Column(2nd floor) |
| 19 | Chajja(2nd floor) |
| 20 | Roof Beam(2nd floor) |
| 21 | Roof Slab(2nd floor) |
| 22 | Supplying, fitting and palcing uncoated HYSD bar rainforcement including cutting, bending, binding of M.S. rod including cost of all materials, labour T&P etc. complete as per direction of the Engineer-in-charge. |
| 23 | HYSD(1ST FLOOR) |
| 24 | HYSD(2nd FLOOR) |
| 25 | Flyash brick masonary in C.M.(1:6) with Flyash brick of approved quality and size including splays cutting, circular moulding with cost, conveyance of materials including royalty, watering,curing etc.complete as per direction of the Engineer-in-charge.In Foundation & Plinth |
| 26 | In Superstructure CM (1:6)(Ground Floor) |
| 27 | In Superstructure(1:6)(1st Floor) |
| 28 | In Superstructure(2nd Floor) |
| 29 | Flyash brick masonary in C.M.(1:4) with flyash. brick of approved quality and size in superstructure including splays cutting, circular moulding with cost, conveyance of materials including royalty, watering,curing etc.complete.In Superstructure cm(1;4)(Ground Floor) |
| 30 | In Superstructure(1:4)(1st Floor) |
| 31 | 16mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.16mm thick C.P(Ground floor) |
| 32 | 16mm thick C.P(1st floor) |
| 33 | 16mm thick C.P(2nd floor) |
| 34 | 12mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.12mm thick C.P(Ground floor) |
| 35 | 12mm thick C.P(1st floor) |
| 36 | 12mm thick C.P(2nd floor) |
| 37 | 6mm thick C.P. in C.M.(1:4) to RCC surface finished smooth including closed deep chiping and slury treatment with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.6mm thick C.P(Ground floor) |
| 38 | 6mm thick C.P(1st floor) |
| 39 | Providing fitting and fixing of false ceiling with Aluminum anodised T Section No. 3215 with 2'-0 center to center, L section NO. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2-0 x 2\\" - 0\\" with India Gypsum board of 125mm thick. etc. complete.Ground Floor |
| 40 | First floor |
| 41 | Providing fitting and fixing of false ceiling with Aluminum anodised T Section No. 3215 with 2'-0 center to center, L section NO. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2-0 x 2\\" - 0\\" with 6mm thick plain A.C.Sheet of 125mm thick. etc. complete.First Floor |
| 42 | Supplying fitting and fixing vetrified tile in floors of size 600mmx600mm of approved make with appliction of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials, labour T&P etc.required for the work.Vetrified tiles(Ground floor) |
| 43 | Vetrified tiles(1st floor) |
| 44 | Supplying, fitting and fixing Anti-Skid ceramic tile in floors, treads of steps and landing on 20mm thick cement mortar(1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge. ( For New work Only)Ceramic tiles in floors(Ground floor) |
| 45 | Ceramic tiles in floors(1st floor) |
| 46 | Fixing glazzed wall tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.vertified wall tiles in dados(Ground floor) |
| 47 | vertified wall tiles in dados(1st floor) |
| 48 | Fixing Granite tiles above 0.40sqm in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.Granaite tile(Ground floor) |
| 49 | Granaite tile(1st floor) |
| 50 | Fixing vertified wall tiles in dados, (600mm x 600mm) skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.Granaite tile(Ground floor) |
| 51 | Granaite tile(1st floor) |
| 52 | providing fitting and fixing Vertified Industrial tiles in floor with c.m. 1:1 with cost of all materials etc.Industrial tile(Ground floor) |
| 53 | providing fitting and fixing M.S. window grills and grill gate made out of M.S. angle with flat with cost of all materials etc.M.S Window(Ground floor) |
| 54 | M.S Window(1st floor) |
| 55 | providing fitting and fixing M.S. Door grills and grill gate made out of M.S. angle with flat with cost of all materials etc.M.S Door(1st floor) |
| 56 | M.S Door(2nd floor) |
| 57 | Dressed seasoned Nonsalwood work framed and fixed in trusses,purlins, door, window, ventilaters and beams.Ground Floor |
| 58 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etccomplete as per direction of the Engineer-in-charge.Railing(Ground floor) |
| 59 | Railing(1st floor) |
| 60 | Providing for Supplying of WPC door frame 125mm x 2.5mm of approved make & shade manufactured by reputed manufacturer like rajashri plastiwood, Alstone, Armstrong including all hardware fittings etc complete.First Floor |
| 61 | Supplying fitting and fixing in position 30/32 mm factory made flush door shutters laminated both side sunmica with adhesive including fixing of fixtures like Godrej make Mortice lock having model no 9168, Godrej make Door closure having model no 8340, 100mm aluminium hinges, handle, tower bolt, stopper Ground floor |
| 62 | 1st floor |
| 63 | Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC) (FENESTA/NCL VEKA LTD.) Casenent Door-60-Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames 102mm x 60mm x 2.25mm casement Door Sash profile and 74mm x 60mm x 2.5mm mullion peofile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set of sashes and th esystem isto be installed at the site using anchor fasteners, silicon rubber sealant,easy glazing/deglazing at site etc. including cost and conveyance of all material, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-447-95 and other applicable codes and standards. (Ref.-Office of the Engineer-In-Chife (CIVIL), Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100) |
| 64 | 1st floor |
| 65 | Supplying, fitting-Fixing of Two Track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame , shutters and all fitting and features. |
| 66 | 1st floor |
| 67 | 2nd floor |
| 68 | Supplying, fitting, fixing up window (sliding type) made up aluminium section 9778 as window frame Section No.4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as pannel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes of labour, T&P etc. complete asper direction of E.I.C |
| 69 | 1st floor |
| 70 | 2nd floor |
| 71 | Supplying fitting fixing of 2'-0\\" wide Almirah made out up 19mm & 12mm BWR Ply & covered with 1mm Laminated (Sunmica) including Cromium coated handle 75mm with 125 x 25mm / 100mm with 150x25mm including all fitting including cost of material all taxes, T&P etc complete as per direction of Engineer -in-charge |
| 72 | 1st floor |
| 73 | Supplying ,fitting and fixing of office Table , camputer Table made out by of 19mm B.W.R. Ply wood and 2mm thick centuri sunmica of approaved make on side , middle, Top and front side wall with foot rest and computer key board draw including cost, conveyance taxes of all fitting and materials cost of all labour T&P etc complete as per direction of Engineer-In- Charge. |
| 74 | 1st floor |
| 75 | Finishing wall surface with Acrylic wall putty (water based) of approved make and finish smooth and even surface to receive painting including cost of all materials, labour and T&P etc.complete as per direction of the Engineer-in-charge. Acrylic wall putty(Ground floor) |
| 76 | Acrylic wall putty(1st floor) |
| 77 | Acrylic wall putty(2nd floor) |
| 78 | Priming 1 coat with wall primer water bond cement primer includingcost, conveyance and taxes of all materials etc.complete as per direction of the Engineer-in-charge.Wall primer(Ground floor) |
| 79 | Wall primer (1st floor) |
| 80 | Wall primer (2nd floor) |
| 81 | Wall painting two coats with plastic emulationon paint of approved shae on new work to give an even shade including cost, conveyance of materials labour, T&P etc.complete as per direction of the Engineer-in-charge.Plastic emultion paint (Ground floor) |
| 82 | Plastic emultion paint (1st floor) |
| 83 | Plastic emultion paint (2nd floor) |
| 84 | Finishing wall surface with two coats of weather coat over a coat of primer including cost, conveyance and taxes of materials with all labour and T&P etc.complete as per direction of the Engineer-in-charge.Weather coat (Ground floor) |
| 85 | Weather coat (1st floor) |
| 86 | Weather coat (2nd floor) |
| 87 | Priming one coat of primer on the steel item with any approved paint including cost of paint. Priming steel item(Ground floor) |
| 88 | Priming steel item (1st floor) |
| 89 | Priming steel item (2nd floor) |
| 90 | Dismantling & removing RCC column & beam,landing lintel etcstacking the useful aterial for reuse and removing the debris upto 50mtr lead |
| 91 | Dismantling brick work in stone masonry under 3mtr height including stacking the useful aterial for reuse and removing the debris upto 50mtr lead |
| 92 | Dismantling wrought framed timber root after removing nails ,nuts etc after stacking the useful material for reuse and removing the debris upto 50 m lead etc all complete. |
| 93 | Dismantling GCI/AC sheet after removing nails ,nuts etc after stacking the useful material for reuse and removing the debris upto 50 m lead etc all complete. |
| 94 | Dismantling and removing old tile flooring including removing old base course after stacking the useful material for reuse and removing the debris upto 50 m lead etc all complete. |
| 95 | Dismantling and removingdoor,window and ventilator including removingframe,hinges and fastening after stacking the useful material for reuse and removing the debris upto 50 m lead etc all complete. |
| 96 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group A |
| 97 | -do- Group B |
| 98 | -do- Group C |
| 99 | Recessed wiring to Fan Point in... -do- Group B |
| 100 | Recessed wiring to Call Bell Point in... -do- Group C |
| 101 | Recessed wiring to Exhaust Fan Point in -do- Group B |
| 102 | S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
| 103 | S/F of Angle holder replacing Ceilling Rose |
| 104 | S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board |
| 105 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. |
| 106 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 107 | S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type socket, 32A Modular Starter switch & Mini DP MCB, connection, painting etc as required for AC |
| 108 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover. |
| 109 | S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection |
| 110 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover |
| 111 | 4 Modular box with base & cover |
| 112 | 6 Modular box with base & cover |
| 113 | 8 Modular box with base & cover |
| 114 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard)2x1.5+1x1.5 (1.8.1) |
| 115 | 2x2.5+1x1.5 (1.8.2) |
| 116 | 2x4+1x1.5 (1.8.3) |
| 117 | 4x6+2x2.5(1:8:10) |
| 118 | 4x10+2x4(1:8:11) |
| 119 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 120 | S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 121 | S/F of C series TPN MCB of 63 amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box(2.6.4) |
| 122 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.)S/F of 4 way (4+12) TPN MCB DB double door (2.5.5) |
| 123 | S/F of 6 way (6+18) TPN MCB DB double door (2.5.6) |
| 124 | S/F of G.I.Earth Plate Earthing 600 mm x600mmx6mm with Salt & Charcoal for Earth electrode (3:4)+(3.6) |
| 125 | S/L of 25mm x 6mm G.I. earth strip in ground(3:10) |
| 126 | Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31) |
| 127 | Supply and fixing of 225mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB ) |
| 128 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 129 | S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL/ Havells/PAC/Crompton/Polycab) |
| 130 | Supply and fixing of 1200mm A.C. Ceiling fan (5 star) 28 watt BLDC with all accessories and connections with out fan regulator (Make:Usha-Techinix ISI /Crompton- Energion Groove/Havells-Efficiencia Neo/ Anchor- Eco Breeze Urban/Orient-Eco Tech Supreme/ Pollycab -Affeciente Neo ) |
| 131 | S/F step type modular fan regulator |
| 132 | Supply and fixing of 400 mm wall fan with all accessories and connections (Make:Usha-Maxx Air Ultra /Crompton- WM Hiflow wave /Havells-Accelro(HS)/Anchor- Altrix HS- OWH /Orient-Wall 43/ Great White - WYNO WF/ Pollycab -Aery HS ) |
| 133 | Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval type including necessary connections. ( M-5 ) |
| 134 | Supply and fixing of 30-35 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells ) |
| 135 | S/F of 10w Watt LED Bulb |
| 136 | S/F of 15w Watt LED Bulb |
| 137 | S/F of 18W LeD Squre (12\\"×12\\") LSDSMN-12W-WW with surface Panel rings (Havels/crompton/philips/panasonic) |
| 138 | Provision of Armoured cable size 3 1/2 x 35sqmm (25) |
| 139 | Laying of MV cable above 25sqmm to 120sqmm in ground (5.1.2) |
| 140 | Laying of MV cable above 25sqmm to 120sqmm on surface (5.5.2) |
| 141 | S/M of end termination of LV/MV cable size 3 1/2 x35 sqmm (5.8.21) |
| 142 | Supply & fixing of 63A TPN Panel board 1. 63A MCCB (Make- Legrand/Seimens/L&T/C&S/) 2. 100A kit kat & bus bar3. 63A TPN MCB- 3 nos 4. 63 A 4P load changeover switch (Legrand/Seimens/L&T/C&S)- 1nos 5. Digital Volt meter & Ameter three phase 6. All accesories & Connection (Rating & Danger borad) |
| 143 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.Initial lift up to 1.50 mtr |
| 144 | Addl. Depth of 1.5 m |
| 145 | Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge |
| 146 | Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. |
| 147 | Supplying all materials, labour, T&P and providing cement concrete ( 1:1.5:3 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 148 | Supplying all materials labour T&P and providing brick work with Fly ASh Bricks having c. s. not less than 75Kg/cm2 with dimensional tolerance +-8% in cm (1:3)including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and dir of EIC |
| 149 | Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 150 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 151 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 152 | Supplying all materials labour T&P and providing 12 mm thick cement plaster in C.M. (1:3) on brick/stone work including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. |
| 153 | Supplying all materials labour T&P and providing cement punning including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. |
| 154 | Supplying all materials labour T&P and providing cement flush pointing to brick masonry (1:3) including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. |
| 155 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
| 156 | Supplying all labour materials T&P and fixing of 2 RCC baffle wall precast with cc (1:1.5:3) using 12mm bhg chips for fitted to septic tank as per PH specification and direction of EIC |
| 157 | Supplying all materials labour T&P and providing fitting and fixing SW Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size hg chips all complete materials to as per specification and dir of EIC.100x100x100mm PVC Tee/Y |
| 158 | Supplying all materials labour T&P and providing precast RCC manhole cover with cc (1:12:3) of 12mm hg chips including conveyance of all materials to site after payment of royalty and taxes etc. all complete as per PH specification and direction of EIC-(size 550mmx550mmx76mm) |
| 159 | Supplying all labour materials T&P fitting fixing of AL. door frame with OEL Anodized Al. Door section of 9202 as vertcal member,9201 as top member and 9200 as bottom and middle member and 12 mm thick pre-laminated board in bottom portion fixed on door frame by meams of tapered clip NO-4660 and the frame by means of jointing angle NO-185 including all cost of labour ,T&P ,hire charges of drilling machine ,labour etc all complete as per the dir of EIC. |
| 160 | Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. |
| 161 | Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC. |
| 162 | Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC 110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast)(a) 110mm dia PVC pipe |
| 163 | 110mm dia PVC'P' trap |
| 164 | 110mm dia.PVC D/J/D |
| 165 | 110mm dia.PVC H.R.Bend |
| 166 | 110mm dia.PVC Door Bend |
| 167 | 110mm dia PVC Plain Bend |
| 168 | 110mm dia PVC offset |
| 169 | 110mm dia PVC Cowl |
| 170 | 75mm dia PVC pipe |
| 171 | 75mm dia.PVC Door Bend |
| 172 | 75mm dia PVC Plain Bend |
| 173 | 75mm dia PVC Tee |
| 174 | 75mm dia.PVC Door Tee |
| 175 | 75mm dia.PVC Y Tee |
| 176 | 75mm dia PVC offset |
| 177 | 125mm dia CP greatings |
| 178 | Supplying all materials,labour,T&P and cutting holes through brick/stone masonry walls for taking PVC pipes and fittings including making good the damages etc. all complete as per the P.H. specification and direction of E.I.C. (a) 250mm to 375mm thick wall |
| 179 | Roof cutting |
| 180 | Supplying all materials,labour,T&P for fixings water closet, squatting pan (I.W.C pan/Orissa pattern squatting pan)dully embedded in CC(1:5:10) using 4cm h.g. metal all complete as per the direction of E.I.C. (Hindware/Parryware/Cera/Equivalent) (a) 580mm Orissa Pan(White) |
| 181 | Supplying all materials,labour T&P and fixing wash down water closet(E.W.C) of ISI mark of with integral 'S' or 'P' trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent) |
| 182 | Supplying all materials,labour,T&P and fixing of plastic seat cover for E.W.C with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent) |
| 183 | Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipeby means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C. (a) Porcelain half stall urinal (Hindware/Parryware/Cera/Equivalent) |
| 184 | Supplying all materials, labour, T&P and fixing glazed earth ware squatting plate size (450x355x100) mm with integral flushing pipe including embedding the plate in 25 mmC.M (1:8) laid over 150 mm C.C (1:4:8) using 40mm h.g metal etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent) |
| 185 | Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC.550x400mm WHB-(Neycer/ Parry ware/ Cerra/Hindware Make) |
| 186 | Pedestral 550x400mm WHB |
| 187 | Supplying all materials labour T&P and fixing wash kitchen sink/laboratory sink with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per PH sp and dir of EIC550x450x200 mm stainless steel kitchen sink heavy good quality. |
| 188 | Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap FLY ASH Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap |
| 189 | Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, FLY ASH Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.size : (760mmx760mmx460mm) Inspection Chamber |
| 190 | Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.110mm dia PVC Pipe with allround encasing |
| 191 | Supplying all materials labour T&P and construction soak way pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and FLY ASH Brick work in cm(1:6) for the remaining height at top 12mm thick cp (1:4) inside and outside over masonry brick work gravel packing the rear of well staining RCC cover slab in c.c. (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including e.w. in open well excavation in all kinds if soil and refilling the cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to work site payment royalty, taxes etc. complete as per approved drawing specification and direction of EIC. 1.20m dia x 2.00m deep soak way pit |
| 192 | Supplying all materials labour T&P and fixing of PVC water storage tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC.2000 lit (Sintex/Plasto/Supreme tank of three layer) (1st Floor) |
| 193 | Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC.2000 ltr capacity tank 1st floor |
| 194 | Supplying all materials,labour,T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80) and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.25mm dia (ASTM )PVC Pipe |
| 195 | 32mm dia (ASTM )PVC Pipe |
| 196 | 15mm dia PVC inlet Connection Pipe |
| 197 | 32mm dia PVC Waste Pipe |
| 198 | Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C. |
| 199 | Supplying all materials,labour,T&P and cutting holes in RCC,floors,roofs etc. upto 19cm thick for passing G.I/PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C. |
| 200 | Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.a)upto 300mm wide |
| 201 | Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C. (Plaza/Amber)15mm dia C.P Bib Cock(L.B) |
| 202 | 15mm dia C.P Bib cock(S.B) |
| 203 | 15mm dia C.P Twin Bib cock |
| 204 | 15mm dia C.P Health Fuccet |
| 205 | 15mm dia C.P Pillar cock |
| 206 | 15mm dia Angle Stop Cock |
| 207 | 15mm dia Concealed Stop Cock |
| 208 | 15mm dia CP Flange |
| 209 | 15mm dia CP Extension Piece |
| 210 | 32mm dia PVC Ball valve |
| 211 | Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern (Neycer/ Parry ware/ Cerra/Hindware Make) |
| 212 | Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC.Rectangular Plastic Frame Mirror Good quality |
| 213 | Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality |
| 214 | Supplying all materials, labour T&P and fitting and fixing Acraylic shelf including polishing all complete as per P.H. specification and direction of EIC. 450mmx125mm size Plate Acraylic Shelf with heavy good quality |
| 215 | Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.CP Towel rail (20x600) heavy Stainless steel. |
| 216 | CP Towel ring heavy Stainless steel withJaquar make . |
| 217 | Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC 15mm dia cp shower (Shower+Arm) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Mar 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedMar 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender