|
| 1 | Earthwork in excavation in hard soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5metre lift and stacking the soil upto a lead off 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge. |
| 2 | Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge. |
| 3 | Supplying and filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction of Engineer-In-Charge. |
| 4 | Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6\\") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge. |
| 5 | First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. |
| 6 | Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge |
| 7 | CC - M20 grade using 20 mm and down graded size hard crusher broken granite chips of approved quality from approved quarry including centring shuttering, hoisting and laying all cost of materials, labour, conveyance, royalties,Tools and Plants, water for curing etc all complete as per OPWD specification required for the work to finished items of work. For Footing |
| 8 | CC - M20 grade using 20 mm and down graded size hard crusher broken granite chips of approved quality from approved quarry including centring shuttering, hoisting and laying all cost of materials, labour, conveyance, royalties,Tools and Plants, water for curing etc all complete as per OPWD specification required for the work to finished items of work. For Column upto plinth |
| 9 | CC - M20 grade using 20 mm and down graded size hard crusher broken granite chips of approved quality from approved quarry including centring shuttering, hoisting and laying all cost of materials, labour, conveyance, royalties,Tools and Plants, water for curing etc all complete as per OPWD specification required for the work to finished items of work. For Plinth beam |
| 10 | CC - M20 grade using 20 mm and down graded size hard crusher broken granite chips of approved quality from approved quarry including centring shuttering, hoisting and laying all cost of materials, labour, conveyance, royalties,Tools and Plants, water for curing etc all complete as per OPWD specification required for the work to finished items of work. For column above plinth |
| 11 | CC - M20 grade using 20 mm and down graded size hard crusher broken granite chips of approved quality from approved quarry including centring shuttering, hoisting and laying all cost of materials, labour, conveyance, royalties,Tools and Plants, water for curing etc all complete as per OPWD specification required for the work to finished items of work. For Lintel |
| 12 | CC - M20 grade using 20 mm and down graded size hard crusher broken granite chips of approved quality from approved quarry including centring shuttering, hoisting and laying all cost of materials, labour, conveyance, royalties,Tools and Plants, water for curing etc all complete as per OPWD specification required for the work to finished items of work. For Roof beam |
| 13 | CC - M20 grade using 20 mm and down graded size hard crusher broken granite chips of approved quality from approved quarry including centring shuttering, hoisting and laying all cost of materials, labour, conveyance, royalties,Tools and Plants, water for curing etc all complete as per OPWD specification required for the work to finished items of work. For Roof Slab |
| 14 | Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge. |
| 15 | 12mm cement plaster to out side of brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
| 16 | 16mm cement plaster to inside of brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
| 17 | 6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1 cement : 4 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
| 18 | Supplying, fitting and fixing of Antiskid Ceramic Floor Tiles in flooring using special plain / printed series Ceramic Floor Tile of premium grade ( having minimum thickness 7 mm to 8 mm & size 300 mm x300 mm, confirming to I.S 13755 of approved quality and shade in floors, treads on steps and landings on 20 m.m thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened & washed sharp river sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments (Tiles are to be immersed in the water for required time before use) of approved make to match the shades of the Ceramic Floor Tiles if required including cost, conveyance, loading, unloading, stacking, royalties , all taxes, cost of all Labour, Labour cess ,Sundries, T&P required for the work , Watering , Curing for required days , cleaning the flooring space manually etc. complete in all respect as directed by the Engineer-in-charge. |
| 19 | Supplying, fitting & fixing of Ceramic wall tiles of premium grade of size (200x300 mm/200x200 mm) having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 20 | Supplying, fitting & fixing of 10 mm thick & size of 600x600 mm vertified floor tile of matt finish with veilcraft (VC/FT ) shield( Scratch free/stain free) with water absorption limit between 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib). laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer- in-charge (for New Work only ) |
| 21 | Supplying, fitting & fixing of 10 mm thick and size of 600x600 mm vertified wall tile of in dadoes, skirting and risers of steps of laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge. |
| 22 | Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete |
| 23 | Factory made GIRID FRP or called GRP sandwich composite door shutter of 32mm thick laminated with two GRP skin with good grain finish fabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The thickness of the skins shall not be less than 1.50mm . Expanded polysryne ( EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . A structural adhesive compatible with (EPS)foam shall be used for bending the core material. the sal wood reinforcements and the skin The material and process for manufactuing te door shutter shall conform to RV -TIFAC components design centre's standards and specification and the door shutters tested in conformation to IS 4020-1998. The Finish of door shutter will be plain colour as per specification and direction of the Engineer in Charge. etc. complete |
| 24 | Supplying and installing UPVC- Sliding windows made out of lead free green profiles of KÖMMERLING make with a GREENLINE mark having two tracks and two sashes (shutters) with frame dimension of 58mm x 49mm and sash dimension of 61mm x 47mm x 37mm for windows with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm to 2 mm. The sash will be fitted with 5/6mm clear glass (float/toughened). The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards.The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent and all complete as per architectural drawings and the direction of the Engineer - in- charge. |
| 25 | Supplying and Fixing of M.S. Grills, M.S. Doors, M.S. Gate etc including cost, conveyance of all materials, priming and labour for fitting fixing etc. complete as per the instruction of Engineer-in-Charge |
| 26 | Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in- charge. |
| 27 | Painting two coats with approved anti-fungal weather seal paints (ISI) of approved colour, shade on wall surface over a coat of wall primer(ISI) water bound including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour,labour cess with T&P etc, complete as per specification & direction of Engineer-in-charge. |
| 28 | Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. |
| 29 | Painting two coats with approved plastic emulsion paint over a coat of wall primer of make Dulux / Berger / Asian to inside surface of walls finished with Acrylic Wall putty (water based) of make (Birla / JK) and finished smooth & even surface to receive painting using roller to the final coat including cost of scaffolding staging charges with cost, conveyances, taxes of all materials, cost of labour, T&P required for the work etc. complete for all floors as per specification & direction of the Engineer-in-charge. Note :- Sample of Paint & Primer shall be approved before procurement and use. |
| 30 | Painting two coats with approved Enamel Paint on Steel work in Ground Floor |
| 31 | WATER SUPPLY- Providing all materials, labour, T&P for laying/fixing of following dia CPVC pipes SDR-11 as per IS-15778/2007 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes,duties, transportation scaffolding etc. as per specification and direction of Engineer-in- charge. Make:Supreme/ ASHRIVAD/ AJAY. FOR 20 MM DIA for 20 mm |
| 32 | WATER SUPPLY- Providing all materials, labour, T&P for laying/fixing of following dia CPVC pipes SDR-11 as per IS-15778/2007 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes,duties, transportation scaffolding etc. as per specification and direction of Engineer-in- charge. Make:Supreme/ ASHRIVAD/ AJAY. FOR 20 MM DIA for 25 mm |
| 33 | Providing and fixing chlorinated Vinyl Chloride CPVC Sch-80 Pipes conforming to ASTM-441 having thermal stability for hot and cold water supply,including all CPVC Plain & Brass threader fittings including fixing the pipe with clamps at 1.00 mtr spacing.This includes jointing of pipes & fittings with one step CPVC Solvent cement and testing of joints complete as per specification and direction of Engineer-in-charge. Make:- Astral/ Supreme/ ASHRIVAD/ AJAY. for 40 MM DIA COVC VALVE |
| 34 | Providing and fixing chlorinated Vinyl Chloride CPVC Sch-80 Pipes conforming to ASTM-441 having thermal stability for hot and cold water supply,including all CPVC Plain & Brass threader fittings including fixing the pipe with clamps at 1.00 mtr spacing.This includes jointing of pipes & fittings with one step CPVC Solvent cement and testing of joints complete as per specification and direction of Engineer-in-charge. Make:- Astral/ Supreme/ ASHRIVAD/ AJAY. for 25 MM DIA CPVC BALL VALVE |
| 35 | Providing all materials labour, T&P for making grooves in bricks/stone masonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of materials, curing, conveyance, taxes of all materials etc. all complete as perspecification & direction of EIC. |
| 36 | Providing all labour,T&P for cutting holes in bricks or stone masonry wall for taking pipes in all floors and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4 to original shape including cost of all materials, curing, conveyance, taxes, duties etc. all complete as per specification & direction of Engineer-in-charge.For 15mm to 75mm dia pipe to pass in 125mm to 250mm thick wall |
| 37 | SANITARY FIXTURES- Providing all materials, labour, T&P for fitting and fixing white glazed vitreous china water closet (European pattern) with seat cover (solid) of approved make in all floor including supply of sutaible bracket, PVC wall plug and Brass screws etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make:HINDWARE/ PARRYWARE/ CERA. (As per Cat no.20011 of Hindware) WATER CLOSET (ewc) WITH PEDESAL |
| 38 | SANITARY FIXTURES- Providing all materials, labour, T&P for fitting and fixing white glazed vitreous china water closet (European pattern) with seat cover (solid) of approved make in all floor including supply of sutaible bracket, PVC wall plug and Brass screws etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make:HINDWARE/ PARRYWARE/ CERA. (As per Cat no.20011 of Hindware) UNDER COUNTER WASH HANED BASIN (CERA MAKE) |
| 39 | Providing all materials, labour, T&P for fitting and fixing white glazed vitreous china water closet (European pattern) with seat cover (solid) of approved make in all floor including supply of sutaible bracket, PVC wall plug and Brass screws etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make:HINDWARE/ PARRYWARE/ CERA. (As per Cat no.20011 of Hindware) FOR OWC |
| 40 | Providing all materials, labour, T&P for fitting and fixing white glazed vitreous china water closet (European pattern) with seat cover (solid) of approved make in all floor including supply of sutaible bracket, PVC wall plug and Brass screws etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make:HINDWARE/ PARRYWARE/ CERA. (As per Cat no.20011 of Hindware) FOR Cistern Parry wire |
| 41 | Providing all materials, labour, T&P for fixing of following sizes of Prime mirror (450X300 mm) of 6mm thick mounted on 6mm thick AC back sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C. for Hardware mirror (As per ingineer incharge) |
| 42 | Providing all materials, labour,T&P ,fittings and fixing of different water supply (CP on Brass) fitting (Quarter Turn or as specified) as per IS specification & approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required and directed including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in- charge. FOR 15mm dia Angle Stop cock with Wall Flange. (As per Cat no.KUP-35053PM of Jaquar) |
| 43 | Providing all materials, labour,T&P ,fittings and fixing of different water supply (CP on Brass) fitting (Quarter Turn or as specified) as per IS specification & approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required and directed including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in- charge. FOR Pillar Cock |
| 44 | Providing all materials, labour,T&P ,fittings and fixing of different water supply (CP on Brass) fitting (Quarter Turn or as specified) as per IS specification & approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required and directed including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in- charge. FOR C.P. Soap Dish holder. |
| 45 | Providing all materials, labour,T&P ,fittings and fixing of different water supply (CP on Brass) fitting (Quarter Turn or as specified) as per IS specification & approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required and directed including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in- charge. FOR Two-way Bibcock with wall Flange. (As per Cat no.FLR-5041N of Jaquar) |
| 46 | Providing all materials, labour,T&P ,fittings and fixing of different water supply (CP on Brass) fitting (Quarter Turn or as specified) as per IS specification & approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required and directed including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in- charge. FOR Health Faucet ABS SS braided hose 1.00m with CP hook. (As per Cat no.ALD-565 of Jaquar) |
| 47 | Providing all materials, labour,T&P ,fittings and fixing of different water supply (CP on Brass) fitting (Quarter Turn or as specified) as per IS specification & approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required and directed including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in- charge. FOR 32mm dia C.P.waste 130 mm ht. (Half Threaded) (As per Cat no.ALD-CHR-709L130 of Jaquar) |
| 48 | Providing all materials, labour,T&P ,fittings and fixing of different water supply (CP on Brass) fitting (Quarter Turn or as specified) as per IS specification & approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required and directed including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in- charge. FOR 15mm dia Angle Stop cock with Wall Flange. (As per Cat no.KUP-35053PM of Jaquar) |
| 49 | Providing all materials, labour,T&P ,fittings and fixing of different water supply (CP on Brass) fitting (Quarter Turn or as specified) as per IS specification & approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required and directed including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in- charge. FOR 600 mm long Braided Hose Connection Pipe. ( As per Cat no.324-H of Prayag) |
| 50 | Supplying, fixing and testing PVC NahaNi floor trap with SS frame and cover 110mm dia outlet fixed on a bed of cement concrete with (Heavy duty type) etc., complete. MAKE- Astral-M252003236 for long body |
| 51 | Providing, laying and jointing UPVC SWR TYPE-B pipes and fittings along with fixing to wall etc complet as per IS no-13592. for 110 mm dia pipe |
| 52 | Providing, laying and jointing UPVC SWR TYPE-B pipes and fittings along with fixing to wall etc complet as per IS no-13592. for 75 mm dia pipe |
| 53 | Supplying all materials, labour, T&P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge for Inside size 750mm x 750mm x 750mm |
| 54 | Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge Gully trap chamber (250 X 250 X 300MM) wth rcc cover slab |
| 55 | Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Size- 1200 x900x900 mm |
| 56 | Earth Work excavation in hard soil including moorum stony earth and earth mixed with boulder within 50 m initial lead and 1.5 m initial lift including dressing and breaking clods levelling the bed up to required depth and depositing the excavated materials with all leads and lifts T and P etc. complete as per direction of Engineer-in-charge. |
| 57 | Supplying and filling in foundation and plinth with sand well watered and rammed with cost, conveyance, royalty taxes of all materials etc. complete as per direction of engineer-in-charge. |
| 58 | Cement Concrete (1:4:8) with 4 cm size CBHGed quality from approved quarry including lowering laying concrete water curing to required level not exceeding 150 mm thick including cost, conveyance, royalty taxes of all materials etc. complete as per direction of Engineer-in-charge. |
| 59 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick C.C. Paver Blocks of With approved colour design Pattern etc. complete. |
| 60 | CC - M20 grade using 20 mm and down graded size hard crusher broken granite chips of approved quality from approved quarry including hoisting and laying all cost of materials, labour, conveyance, royalties,Tools and Plants, water for curing etc all complete as per OPWD specification required for the work to finished items of work. |
| 61 | Avenue Pantation |
| 62 | Benches with shade |
| 63 | Electrification |
| 64 | Sound system |
| 65 | PH work for park |
| 66 | Installation od CC Camera |
| 67 | Inastallation of Water Cooler with Aqua Guard Please Enable Macros to View BoQ information |
