Tender For Mastic Flooring Work (P/L Mastic Flooring And Bc Patch Work On Garhi Gol Chakkar And Crossing At Fng Road In Wc-4 Area), Noida., Noida-Uttar Pradesh
TDR : 54541755
Tender Notice
BOQ
8 Days Left
Noida
Uttar Pradesh
Tender For Mastic Flooring Work (P/L Mastic Flooring And Bc Patch Work On Garhi Gol Chakkar And Crossing At Fng Road In Wc-4 Area), Noida.
Name of Work:- Mastic Flooring Work (P/L Mastic Flooring and BC Patch Work on Garhi Gol Chakkar and Crossing at FNG Road in WC-4 Area), Noida.
Sl. No.
Item Description
1
Providing and laying bitumen mastic wearing course (as per specifications) with industrial bitumen of grade 85/25 conforming to IS : 702, prepared by using mastic cooker and laid to required level and slope, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximate spacing of 10 cm centre to centre in both directions, pressed into surface protruding 1 mm to 4 mm over mastic surface, including cleaning the surface, removal of debris etc. all complete. (Considering bitumen using 10.2% as per MORTH specification).40 mm thick
2
Dense Graded Bituminous Macadam Grading 2Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.
3
Bituminous Concrete Grading 2 Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects
4
Providing and applying tack coat using hot straight run bitumen of grade VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler. cleaning and preparing the existing road surface as per specifications: On bituminous surface @ 0.50 Kg/sqm Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
