|
| 1 | DETAILED ESTIMATE |
| 2 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 3 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 4 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side |
| 5 | OD520594/2025-2026:Supplying and fixing PVC door shutter to suit the door frame already fixed using 200mm wide hollow PVC planks in shutter frame 24mm thick and 60mm wide with retaining by long by long classified materials in interale joints completely selected cover and lifted directly to the connected steel reinforcement for door frame including all cost, conveyance and labour charges etc complete |
| 6 | OD520595/2025-2026:Supplying and fixing PVC door frame 53 x65 mm or nearest available size with vertical frame joints fitted for PVC head providing concealed reinforced motor cut and welded corners on computer aided machine, tie rod at the bottom to keep the frame iron hollow connecting elastometric gas cutting grooves etc complete<br> |
| 7 | 13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture . |
| 8 | OD520710/2025-2026:Providing and fixing ACP IN ALUMINIUM DOOR WINDOWS VENTILATOR SHUTTERS AND PARTITION ETCWITH EPDM RUBBER /NEOPRENE GASKET ETC COMPLETE AS PER THE ARCHITECTURAL DRAWINGS AND THE DIRECTION OF ENGINEEER IN CHARGE (COST OF AL SNAP BEADING SHALL BE PAID IN BASIC ITEM ) MODIFIED DATA 21.3.1 WITH 4.0MM THICKNESS ACP |
| 9 | 17.7.10:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:Stainless Steel AISI - 304 ( 18/8/) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap. |
| 10 | 10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 11 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Please Enable Macros to View BoQ information |
