|
| 1 | GRAND TOTAL |
| 2 | Supply |
| 3 | Erection |
| 4 | 2.0 Augmentation and bifurcation |
| 5 | CABLE(XLPE 11 KV) 3CX300SQMM |
| 6 | P C C POLE : 9M LONG |
| 7 | RAIL POLE (11-13 M LONG) 52 KG |
| 8 | WIDE FLANGE BEAM: 13 M LONG WBP 160X160X30.44 KG/M WITH GRADE E300 |
| 9 | M.S CHANNEL 100X50MM |
| 10 | M.S CHANNEL 75X40 MM |
| 11 | M.S.ANGLE 65X65X6 MM |
| 12 | M.S ANGLE 50X50X6 MM |
| 13 | M.S FLAT 65X6 MM |
| 14 | GI STAY SET HT(1830X20MM)WRKG LD-7900KG |
| 15 | G I EARTH SPIKE 1833X20MM |
| 16 | ACSR SQUIRREL (20 SQMM) CONDUCTOR |
| 17 | ACSR RABBIT (50SQMM) CONDUCTOR |
| 18 | ACSR DOG (100SQMM) CONDUCTOR |
| 19 | G.I. STAY WIRE 7/ 2.5MM (12 SWG) |
| 20 | 33 KV POLYMER COMPOSITE WITH FITTINGS PIN INSULATOR (10KN- 900MM CREEPAGE DISTANCE) |
| 21 | 33 KV POLYMER COMPOSITE WITH FITTINGS70KN DISC INSULATOR |
| 22 | 11 KV POLYMER COMPOSITE WITH FITTINGS PIN INSULATOR (5KN- 320MM CREEPAGE DISTANCE) |
| 23 | 11 KV POLYMER COMPOSITE 45KN DISC INSULATOR |
| 24 | COMPOSITE HARDWARE FITTINGS FOR ACSR WEASEL/ RABBIT (30 /50SQMM)CONDUCTOR |
| 25 | COMPOSITE HARDWARE FITTINGS SUITABLE FOR ACSR DOG (100SQMM)CONDUCTOR |
| 26 | LIGHTNING ARRESTER 12 KV 5KA PORCELAIN HOUSED GAPLESS TYPEFOR 11KV SYSTEM |
| 27 | TPGO ISOLATOR : 11 KV : 400 AMP. |
| 28 | TPGO ISOLATOR : 11 KV : 200 AMP. |
| 29 | G.I. WIRE 4 MM |
| 30 | ACSR WEASEL (30SQMM) CONDUCTOR |
| 31 | G.I. WIRE 5 MM |
| 32 | G.I. STAY WIRE 7/ 3.15MM (10 SWG) |
| 33 | P C C POLE : 8M LONG |
| 34 | CABLE(HT AERIAL BUNCHED 11 KV) 3CX95+1CX70SQMM |
| 35 | SWITCHGEAR(SHUNT TRIP) WITH VCB (12 KV 350MVA 1250/800A) 2 PNL(0+0+1) |
| 36 | 11KV \\"V\\" BRACKET FOR PCC POLE 8M LONG |
| 37 | 11KV \\"V\\" BRACKET FOR PCC POLE 9M LONG |
| 38 | 11 KV \\"V\\" BRACKET FOR RAIL POLE |
| 39 | 33KV \\"V\\" BRACKET FOR PCC POLE 9M LONG |
| 40 | 11 KV TOP ADAPTOR for PCC pole 8M long |
| 41 | 11 KV TOP ADAPTOR for PCC pole 9M long |
| 42 | 11 KV TOP ADAPTOR for rail pole |
| 43 | 33 KV TOP ADAPTOR for PCC pole 9M long |
| 44 | TURN BUCKLE 18 X 5/8\\" |
| 45 | TURN BUCKLE 18 x 3/4\\" |
| 46 | CLAMP P.G. - A.C.S.R. DOG |
| 47 | PG CLMP-WSL/RBT.( 30/50SMM) |
| 48 | D IRON CLAMP 3\\" x 3.5\\" |
| 49 | AL. BINDING WIRE 5MM/6SWG |
| 50 | PORCELAIN SHACKLE INSULATOR 3\\" x 31/2\\" |
| 51 | PORCELAIN GUY INSULATOR HT |
| 52 | 11KV I/D HS Ter.Jnt.FOR3x300SMM XLPE CAB |
| 53 | 11KVO/D HS Ter.Jnt.FOR3x300SMM XLPE CAB |
| 54 | 11KV ST THR. HS JNT.FOR3x300SMM XLPE CAB |
| 55 | 11KV O/D HS Ter.Jt.FOR(1x95SQ MM)ABC |
| 56 | TEE JNT TAP OFF 11KV ABC TO DTR-1X95SMM |
| 57 | SUSPENTION CLAMP WITH BRKT 180SQMM MESENGER |
| 58 | ANCHORING CLAMP 180SQ.MM. : MESSENGER |
| 59 | EYE HOOK FOR ANCHOR & SUSPN. CLAMP |
| 60 | LIGHTNING ARRESTOR 12 KV 10KA PORCELAIN HOUSED STATION CLASS |
| 61 | ADAPTOR PNL FOR MATCHING OF BUSBAR |
| 62 | Erection of Single Pole Complete With All Fittings i.e, V- Bracket, Top Adaptor etc. and Foundation But Without Any Insulator For sq mmHVOH Line Upto 33 KV: Solid PCC Pole 8 Mtr. Long |
| 63 | Erection of Single Pole With Foundation But Without Any Fittings: Solid PCC Pole 8 Mtr. Long |
| 64 | Erection of Double Pole Structure Complete With All Fittings And Foundation But Without Any Insulator For sq mmHVOH Line Upto 33 KV: Solid PCC Pole 9 Mtr. Long |
| 65 | Erection of Single Pole Complete With All Fittings i.e. V- Bracket, Top Adaptor etc. and Foundation But Without Any Insulator For sq mmHVOH Line Upto 33 KV: Solid PCC Pole 9 Mtr. Long : Without Painting |
| 66 | Erection Of Four Pole Structure Complete With All Fittings And Foundations But Without Any Insulator For sq mmHVOH Line Upto 33 KV: PCC Pole Solid 9 Mtr. Long |
| 67 | Extension Of Single Pole Complete With All Fittings Upto 3 Mtr. Length But Without Insulator For sq mmHVOH Line Upto 33 KV: Solid PCC Pole 8 Mtr. Long : Without Painting |
| 68 | Fixing Of Channel Bracket On 8Mtr. SP (Elongated 3Nos Horizontally For Vertical Line Configuration |
| 69 | Fixing Of Fittings/V Bracket/Top Adopter On Existing 8Mtr. DP Structure |
| 70 | Fixing Or Re-Fixing Of Solid Tee Off Bracket Without Insulator: Single Pole |
| 71 | Stay Set Complete With All Fittings, Guy Insulator Binding etc:HT Stay Set (1830X20 Mm) |
| 72 | Earthing Complete With Driving Of Earth SPike & Connection Of Earth Electrode With Non Current Carrin Metalic Parts Of Supports. Stay Wire, Cradle Guards, L.A. etc. |
| 73 | Straightening Of Poles: 8M.Long PCC |
| 74 | Fixing Of Insulator: 11 KV Pin Insulator With Pin |
| 75 | Fixing Of Insulator: 11 KV Disc Insulator With Strain Hardware |
| 76 | Fabrication & Fixing Of Cradle Guard Bracket: Single Pole |
| 77 | Fabrication & Fixing Of Cradle Guard Bracket: Double Pole |
| 78 | Fixing Of Lead Wire Above 30 Mtr. But Upto 60 Mtr : 2 Wire |
| 79 | Making & Fixing Of Cross Lessing Wire |
| 80 | Dismantling Of Fittings From Existing Pole And Refixing The Same On New Pole At Same Site :V Bracket /Top Adopter Or Equivalent Subtitute 11 KV System |
| 81 | Dismantling Of Insulator From Existing Pole & Refixing The Same On A Pole At Same Site: 11KV Pin With Insulator, 11 KV Disc Insulator With Hardware |
| 82 | GIS Survey |
| 83 | Erection Of Conductor Including Laying, Hoisting, Stringing, Jointing, Sagging, Tensioning & Route Clearance: 50 sq mm ACSR 'Rabit' : 3 Wire |
| 84 | Resagging Of Existing 50 sq mm. ACSR 3Cond. |
| 85 | Dismantling Of Old Conductor ACSR 30 sq mm (3 Cond) From Oh Line & Return To Store |
| 86 | Dismantling Of ACSR 50 sq mm (3 Wire) And Returning To Store |
| 87 | Fixing Of 11 KV T.P.G.O. Isolator On-Line Structure ( D.P. Or Any Compound Structure) Including Fixing Of Supports Eg. Channel, Clamp etc. With Proper Adjustment. |
| 88 | Fixing V Bracket Top Adopter Or Their Equivalent Support On Existing Pole:For 8M Long PCC Pole (Without Painting) |
| 89 | Fixing Of Ht Bracket |
| 90 | Survey (Prelim. & Final) For sq mm HVOH Line Upto 33 KV |
| 91 | Erection Of Conductor Including Laying, Hoisting, Stringing, Jointing, Sagging, Tensioning & Route Clearance: 100 sq mm ACSR 'Dog' : 3 Wire |
| 92 | Straightening Of Poles: Rail Up To - 12.81 M Long |
| 93 | Fixing Of Lead Wire Above 30 Mtr. But Upto 60 Mtr : 4 Wire |
| 94 | Uprooting Of Pole From Existing Site And Returnt The Same To Store In Good Order And Condition: PCC Pole 8M .Long |
| 95 | Fixing Of 11 KV Lightning Arrester On Structure (1 Set Of 3 L.A.S) |
| 96 | Erec. Composit La Earthing |
| 97 | Erection Of Single Pole With Foundation But Without Any Fittings: Solid PCC Pole 9 Mtr. Long |
| 98 | Replacement Of Existing 9Mtr PCC DP With Fitgs(Without Pole Erection) |
| 99 | Straightening Of Poles: 9M Long PCC |
| 100 | Fixing V Bracket Top Adopter Or Their Equivalent Support On Existing Pole:For 8M Long PCC Pole (With Painting) |
| 101 | Fixing Of Solid Tee Off Bracket Without Insulator: Double Pole |
| 102 | Dismantling Of L&Mv Service Lines From Existing Support & Refixing Of The Same On The Same Support Or A New Support At Same Location: Industrial Service |
| 103 | Resagging Of Existing Cradle Guard: Lead Wire Above 30 Mtr & Upto 60 Mtr:2-Wire |
| 104 | Dismantling & Resagging Of Existing Cradle Guard:Lead Wire Upto 30 Mtr.:2-Wire |
| 105 | Dismantling & Resagging Of Existing Cradle Guard:Lead Wire Above 60 Mtr. Upto 100 Mtr:2-Wire |
| 106 | Re Fixing Of Cross Lacing |
| 107 | Fixing Of Lead Wire Above 60 Mtr. But Upto 100 Mtr: 2 Wire |
| 108 | Conversion Of Existing Single Pole /Structure For Making Dist Sub Station Structure With Necessary Fondation And Fittings But Without Isolator And Insulator: On PCC Pole- 8Mtr |
| 109 | Conversion 9 Mtr SP To DP |
| 110 | Conversion Rail SP To DP |
| 111 | Fixing Of 11 KV T.P.G.O. Isolator On Sub-Station Structure With Proper Adjustment |
| 112 | Micro-Tunnelling Work With Laying Of HDPe Pipe As Per Instruction Of Site Ingineer And As Per Site Condition For Laying Of U.G. Cable Including Supply Of HDPe Pipe (Except Cable Laying)As Per Is: 4984-2016 Including Preparation And Submission Of Drawing For Such Cable Laying:With 160Mm Dia. HDPe Pipe Of Pe-80, Pn-6 |
| 113 | Laying & Dressing Of Following 11 KV Xlpe Cable In The Excavated Cable Trenches Is Per Drawing No.Pln(D)/Ss/104, Dt. 05.05.2015 And Instruction Of The Site Engineer:Cable 11KV Xlpe 3 X 300 Sq. Mm |
| 114 | Making Of Straight Through/Transition Joint Including Making Of Jointing Pit Of The Following 11/1. 1 KV.Pilc/ Xlpe/ Pvc Cable Without Supply Of Jointing Materials Excluding Making Of \\"Protection Duct For Cable Joint\\": Cable 11 KV Pilc / Xlpe 3 X 300/400 Sq. Mm |
| 115 | Making & Fixing Of End Termination Joint Indoor Or Outdoor Type For 11 KV Xlpe Cable Including Fixing Of The Jointing Box At The Existing Structure But Without The Jointing Materials As Per Instruction Of The Site Engineer: Cable 11 KV Xlpe 3 X 300Sq. Mm |
| 116 | Supply & Erection Of Cast Iron Cable Marker On Concrete Foundation Blocks For Straight Run, Road Crossing, Joint Location etc As Per Drawing No..Pln(D)/Ss/107 Or 108, Dt. 05.05.2015 & SPecification & Direction Of Site Engineer. |
| 117 | Making Protective Duct For Cable Joint Complete As Per Wbsedcls Approved Drawing (Ref. Drg. No.Pln(D)/Ss/106, Dt. 05.05.2015) |
| 118 | Dismantling Of Damagrd Bracket Return To Store And Fixing Of New Bracket Or Equivalent (8 Mtr PCC Pole ) |
| 119 | Fitting Of Existing Tp Structure 8 Mtr PCC Pole |
| 120 | Dismantling And L & Mv Service Line From Existing Support And Re-Fixing Of The Same (Dom/Com) |
| 121 | Erection Of Double Pole Structure From Single Pole Complete With All Fittings And Foundation But Without Any Insulator For Hv Oh Line Upto 33 KV:8Mtr PCC Pole |
| 122 | Erection Of Single Pole Complete With All Fittings I.E, V- Bracket, Top Adaptor etc. And Foundation But Without Any Insulator For Hv Oh Line Upto 33 KV: Rail Pole Upto 12.8 Mtr. Long |
| 123 | Erection Of Single Pole Complete With All Fittings I.E, V- Bracket, Top Adaptor etc. And Foundation But Without Any Insulator For Hv Oh Line Upto 33 KV:Steel Tubuler Pole 9 Mtr. Long |
| 124 | Erection Of Double Pole Structure Complete With All Fittings And Foundation But Without Any Insulator For Hv Oh Line Upto 33 KV: Solid PCC Pole 9 Mtr. Long:Solid PCC Pole 8 Mtr. Long |
| 125 | Fixing Of Lead Wire : Lead Wire Upto 30 Mtrs:2 Wire |
| 126 | Fixing Of Insulator: Lt Shackle Insulator With 1 No. G.INuts & Bolts |
| 127 | Dismantling Of Damage Fittings Of Existing DP Structure & Re-Fixing The Same W/O Insulator & W/O Paint 8 Meter Long |
| 128 | Dismantling Of Damage Fittings Of Existing DP Structure & Re-Fixing The Same W/O Insulator & W/O Paint 9 Meter Long |
| 129 | Dismantling Of Damage Fittings Of Existing 4P Structure & Re-Fixing The Same W/O Insulator & W/O Paint 8 Meter Long |
| 130 | Earthing With Already Exixting Driven Earth SPike By Only Connecting The Earth Electrode With Non Current Carrying Metal Parts By Means Of Suitable Size Of G.I. Wire |
| 131 | Erection Of Stay Set By Fixing Stay Wire Of Suitable Size, Guy Insulator etc. On Existing Grouted, Driven Stay Set |
| 132 | Dismantling Of L&Mv Service Lines From Existing Support & Refixing Of The Same On The Same Support Or A New Support At Same Location:Domestic/Commercial Service |
| 133 | Dismantle Of Old/Defective Energymeter And Fixing Of A New One With Pilferproof Meter Box : Single Phase |
| 134 | Dismantling Of Deffective Unserviceable Tpgo Isolator (Rocking Type) And Refixing The Same On Same Support/Structure With Necessary Adjustment: 11KV Isolator |
| 135 | Supply & Laying Of 1St Class Bricks (Kiln Burnt) |
| 136 | Survey Of H.T & L.T Cable Route As Per Instruction Of Site Engineer And Submission Of Route Survey Drawing ( In Two Copies) Inscribing Different Land Marks |
| 137 | Providing Muffing At The Base Of Steel Tubular Pole With Cement Concrete (1:3:6) Including Shuttering, The Muffing Should Be 600 Mm Above G.L And Iso Mm Below G.L And Top Should Be Chamfered |
| 138 | Fittings Of DP Structure On 9M PCC Pole |
| 139 | Earthing Of Switchgear As Per Drawing Consisting Of 1 Nos, 3 Metres Long 50 Mm Dia. Medium Gauge G.I Tata Make Pipe (M), Installation & Connection In Between Earth Pipe And Other Equipments Using 2 Nos. G,L Flat 40Mm X 6 Mm. By Welding Complete And As Per Instruction Of The Site Engineer (Including Supply Of All Materials) |
| 140 | Erection Of Shunt Indoor Type 11 KV. 250/350Mva. 400/ 800/1250 Amp. Metering /Non-Metering Ocb / Vcb Complete As Per Wbsedcl'S Approved Drawinq And As Per Instruction Of Site Engineer Or Erection Of Bus Adaptor Panel For Matching Of Bus Bar |
| 141 | Erection Of Double Pole Structure Complete With All Fittings And Foundation But Without Any Insulator For Hv Oh Line Upto 33 KV: Solid PCC Pole 9 Mtr. Long(With Painting) |
| 142 | Erection Of Four Pole Structure Complete With All Fittings And Founndations But Without Any Insulator For Hv Oh Line Upto 33 KV: PCC Pole Solid 9 Mtr. Long(With Painting) |
| 143 | Conversion Of DP To Fp Structure On 9M PCC Pole With Fittings |
| 144 | Fittings Of Four Pole Structure On 9M PCC Pole |
| 145 | Dismantle & Return To Store 11KV Disc,Pin Insulator |
| 146 | Erection Of Anchor Clamp/SuSPension Clamp Suitable For Ht Ab Cable Of 105/180 Sq.Mm Bare Massenger Wire , Including Erection Of G.L./ M.S Pole Clamp, G. I/M.S Flat Type Eye Hook |
| 147 | Fittings Of Single Pole Structure On Rail Pole |
| 148 | Supply & Fixing/ Laying Of G.I Pipe (Medium) (Non-Tata) As Per I.S.I Of The Following Sizes Suitable For Cable Protection As Per Instruction Of Site Engineer:G.I Pipe 150 Mm Dia.(Medium) |
| 149 | Extension Of Single Pole Complete With All Fittings Upto 3 Mtr. Length But Without Insulator For Hv Oh Line Upto 33 KV: Rail Pole |
| 150 | Excavation Of Soil For Formation Of Cable Trenches & Re-Instatement Of Cable Trenches With The Excavated Soil As Per Direction Of Site Engineer. |
| 151 | Replacement Of Single Pole To Tripple Pole Structure On 8M To 9M PCC Pole With Fitt |
| 152 | Dismantling Of Existing Ht Ab Cable(3 X 50 Sq.Mm. - 1 X 105 Sq.Mm , 3 X 95 Sq.Mm + 1 X 180 Sq.Mm ) And Re-Erection Of Cable At Same Location With Necessary Fittings. |
| 153 | Excavation Of Soil For Making Of Trial Hole ( Minm. Size 1.1 X 0.5 X 1.2M Depth ) As Per Instruction Of The Site Engineer Including Backfilling The Excavated Soil. |
| 154 | Stringing & Sagging Of 11KV Ht Ab Cable On PCC/Rp Pole Average SPan Of 25 M To 40 M(Max). With Fixing Of Nylon Cable Tie To Be Tied Every 2 Mtr. Interval Of Ab Cable With Fixing Of End Caps At All Open Ends Of Ab Cable:3X95Sqmm+L X 180Sqmm 11 KV Ab Cable |
| 155 | Fittings Of SP Structure On 8M PCC Pole With Paint |
| 156 | Fixing Of E Bracket On Pre Erected Pole |
| 157 | Out Door Termination Of 1 X 50 Sq.Mm./1 X 95 Sq.Mm Ht Ab Cable By Heat Shrinkable Jointing Kit. (Iset = 3 Nos) |
| 158 | Erection Of Single Pole Complete With All Fittings I.E, V- Bracket, Top Adaptor etc. And Foundation But Without Any Insulator For Hv Oh Line Upto 33 KV:Solid Ppc Pole 8 Mtr. Long(With Painting) |
| 159 | Fittings Of Existing DP Structure On 8M PCC Pole With Paint |
| 160 | Fixing Of 11 KV T.P.G.O. Isolator On-Line Structure ( D.P. Or Any Compound Structure) Including Fixing Of Supports Eg. Channel, Clamp etc. With Proper Adjustment: With Painting |
| 161 | Erection Of Pipe Earthing Complete With Supplying Materials. |
| 162 | Erection Of Single Pole With Foundation But Without Any Fittings:Rail Pole Upto 12.8 Mtr. |
| 163 | Fittings Of DP Structure On Rail Pole |
| 164 | Fixing Of 4 Nos Bracket For Double Ckt (Rate Consider For Solid Tee-Off Fixing On DP) |
| 165 | Conversion Of SP To DP Structure On Rail Pole With Fittings |
| 166 | Fittings Of Fp Structure On 8M PCC Pole With Paint |
| 167 | Fittings Of 4.P. Structure Complete With All Fittings But With Out Any Insulators On 9 Mtr PCC Pole. (Double Ckt) |
| 168 | Conv Of DP To Fp On 9M PCC Pole With Fitt With Paint |
| 169 | Fixing V Bracket Top Adopter Or Their Equivalent Support On Existing Pole:For Rail Pole (With Painting) |
| 170 | Conversion Of Existing Single Pole /Structure For Making Dist Sub Station Structure With Necessary Fondation And Fittings But Without Isolator And Insulator: On 9Mtr PCC Pole |
| 171 | Erection Of Conductor Including Laying, Hoisting, Stringing, Jointing, Sagging, Tensioning & Route Clearance:20 sq mm ACSR 'Sqirrel' Or Eql. Size Of Aaac |
| 172 | Erection Of Double Pole Structure Complete With All Fittings And Foundation But Without Any Insulator For Hv Oh Line Upto 33 KV:Rail Pole Upto 12.81 Mtr. Long With Painting |
| 173 | Erection Of Single Pole Complete With All Fittings I.E, V- Bracket, Top Adaptor etc. And Foundation But Without Any Insulator For Hv Oh Line Upto 33 KV:Rail Pole Upto 12.8 Mtr. Long With Painting |
| 174 | Fixing Of Ms Box Brackets On Pole For L& Mv Line |
| 175 | Resagging Of Existing Conductor Per Km:Iii) 30 sq mm ACSR/Aaac:3 Wire |
| 176 | Conversion Of DP To Fpstructure On 8M PCC Pole With Fittings |
| 177 | Erection Of Four Pole Structure Complete With All Fittings And Founndations But Without Any Insulator For Hv Oh Line Upto 33 KV: Railpole Upto 12.81 Mtr. Long |
| 178 | Fittings Of T.P/D.P Structure Complete With All Fittings But With Out Any Insulators On 9 Mtr PCC Pole. (For Double Ckt.) |
| 179 | Erection Of Double Pole Structure Complete With All Fittings And Foundation But Without Any Insulator For Hv Oh Line Upto 33 KV:Rail Pole Upto 12.81 Mtr. Long |
| 180 | Fittings Of S.P. Structure Complete With All Fittings V-Bracket, Top Adoptor etc But With Out Any Insulators On 9 Mtr PCC Pole. (For Double Ckt.) |
| 181 | Erection Of Single Pole Complete With All Fittings I.E, V- Bracket, Top Adaptor etc. And Foundation But Without Any Insulator For Hv Oh Line Upto 33 KV:Solid PCC Pole 9 Mir. Long:With Painting |
| 182 | Extension Of Single Pole Complete With All Fittings Upto 3 Mtr. Length But Without Insulator For Hv Oh Line Upto 33 KV: Solid PCC Pole 8 Mtr. Long : With Painting |
| 183 | Fixing Of Insulator: 33 KV Pin Insulator With Pin |
| 184 | Fixing Of Insulator: 33 KV Disc (Ie. 3 Nos. 11 KV DiscInsulator With Strain Hardware Please Enable Macros to View BoQ information |
