|
| 1 | supply and dlivery of the following materials at site as per direction: - |
| 2 | Submersible pumping machinery directly coupled with suitable sized wet winding type induction motor with the following specification: – a) Discharge -5000 LPH.b) Head –50 mtr.c) Pump outlet – 40 mm/32mmd) Motor – 1 Φ 50Hz ± 6% 220±10%V. 5 star ratede) Outer diameter – 96mm Φ Max.f) Method of starting – DOLMake – KSB / Pluga / Texmo.T.C. & G.C. needed. |
| 3 | Supply and delivery of 1100 Volt grade 2.5mm2/3core copper waterproof PVC insulated submersible flat cable, make – Gloster / Finolex |
| 4 | UPVC 50mm. Ф. Heavy type Column pipe with one end socketted and both end threaded make – Longlast / Ashirbad / Dupol |
| 5 | 3 mtr long |
| 6 | 1.5 mtr long |
| 7 | Top adapter (CI) |
| 8 | Bottom adapter (CI) |
| 9 | Heavy type MS fabricated suspension clamp suitable for above 80 mm Ф column pipe |
| 10 | Split type MS fabricated suitable tubewell cover with necessary arrangement for clamping devices including holes for air pipe and cable entry gland |
| 11 | 102mm Ф 0-10 Kg / cm2 pressure gauge with brass three way cock and necessary GI fittings make H Guru / Febig |
| 12 | 50mm Φ following GI specials |
| 13 | Plain Tee |
| 14 | 100mm long nipple |
| 15 | 900 Bend |
| 16 | CIDF Non rising type sluice valve PN 1.0 as per relevant IS (IVI / Sigmaflow) |
| 17 | CIDF Non return valve PN 1.0 as per relevant IS (IVI / Sigmaflow) |
| 18 | Union |
| 19 | 25mm Φ following GI specials for cable protection |
| 20 | 100mm long nipple |
| 21 | 900 Bend |
| 22 | Union |
| 23 | Pipe (Medium) |
| 24 | Safety device for the above pump set by supplying MS clamp with proper clamping arrangement and nylon rope as per requirement including supply of all required materials as required |
| 25 | Indoor type wall mounted Panel 2mm CRCA sheet metal body approximate size – (700 x 700 x 300) mm vermin proof IP55 with 32A MCB and MPCB and suitable Voltmeter, ammeter and with 2 nos 2HP DOL starter as per direction and specification make – RNR / ECS / SYSTEM CONTROL |
| 26 | 1100V grade XLPE Aluminium Armored 25mm2 2C cable make – Gloster / Mescab / crystal for drawing power from SEB Mains |
| 27 | 32A 240V SPN Rewireable type main swich make - Havells / Standard / L&T |
| 28 | Outdoor LED luminary with at least 3500Lm light with system efficacy not less than 100lm/w model BRP 333. Make – Phillips / Crompton Equivalent |
| 29 | Fabricated GI Single arm bracket approximately 1.0mtr long suitable size for above luminaries |
| 30 | Street light poles for above luminary 7mtr high weight not less than 73Kg as per IS 2317 - 1980 |
| 31 | Drawing distribution wiring using 1.5mm2 x 2 + 1.5mm2 x 1 (ECC) copper flexible FR wire for the above light load points (Average run 8 mtr) through suitable size PVC rigid conduit including supply and installation of 4 nos LED TUBELIGHT each having 22 W.Make- as per vendorlist of PHED. |
| 32 | Supply and delivery of 450 mm (H) x 300 mm (L) x 250 mm (B) size out door CRCA sheet steel fabricated cubical type kenopy top cable jointing box inside fitted 3 nos 63 amp bus bar and hinged type front door and painted power coated anticorrosive paint as per IP 55 as per direction of E.I.C. |
| 33 | Brick pillar support for the 50mm Φ GI Valves and fittings along with suitable size brick work for protection of the tube well base and Bordering of the Fencing at least 150mm from the GL including supply of necessary materials and neat cement punning to complete the job as per direction of E. I. C. |
| 34 | Installation of the above pumping machinery by derrick arrangement of item no 1A - 1O by necessary jointing materials and interconnection of the sub – cable and power cable with outdoor type Kiosk through cable protection pipe and specials including necessary brick pillar support for the Net fencing, gate etc |
| 35 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on thetop of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed |
| 36 | Earthing arrangement by making 2 nos interconnected Earth pits, having 10 ft. Long 50 mm Ф G.I. Pipe as earth electrode along with filling of earth pit with salt, charcoal etc. interconnected by 25 x 6mm GI Strip and equipment Earthing by 25 x 6mm GI Strip as per IE rules for LT Motor Panel and other electrical accessories. |
| 37 | Painting of the entire installations by thorough scrapping of the metal surface and application of 2 coats of epoxy based primer and 2 coats of epoxy based outdoor type paint as per direction of E. I. C. |
| 38 | Testing commissioning of the whole system as per direction of E. I. C. |
| 39 | Add: 18% GST |
| 40 | Add: 1% Cess Please Enable Macros to View BoQ information |
