|
| 1 | Excavation in trenches and not exe. 1.5 m wide and not exe. 1.5 m in depth for foundation of drain, man hole , laying of water supply pipe / UG cables etc. not exe. 10 Sq. m on plan and not exe. 1.5 m depth and getting out in soft/loose soil complete all as specified and directed. |
| 2 | All same as per item No 1 here-in-above but in hard /dense soil -do- |
| 3 | Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft rock complete all as specified and directed |
| 4 | Removing excavated surplus soil to a distance not exceeding 50 mts and depositing where directed .at a level not exceeding 1.5 M above the starting point complete all as directed. |
| 5 | Material and labour for plain cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregate for foundations / filling around the post all as specified and as directed. |
| 6 | Material and labour for plain cement concrete 1:3:6 type C1 using 20 mm graded crushed stone aggregate pole coping including necessary form work complete all directed. |
| 7 | S&F in repair 25 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings complete laid in trenches complete all as directed. (Note : Excavation & earth work measured & paid seperately). |
| 8 | Taking down old rusted / worn out GI tubing & connections fixed in any despriction & S&F new 15 mm bore GI tubing medium grade (ISI Marked) including necessary fittings (ISI Marked) such as bend, tee, elbow etc complete laid in trenches complete all as directed. (Note : Excavation & earth work measured & paid seperately). |
| 9 | All as per item No. 8 here in above but for 20 mm bore |
| 10 | All as per item No. 8 here in above but for 25 mm bore |
| 11 | All as per item No. 8 here in above but for 40 mm bore |
| 12 | All as per item No. 8 here in above but for 50 mm bore |
| 13 | Taking down old rusted / worn out GI tubing & connections fixed in any despriction & S&F new 15 mm bore GI tubing medium grade (ISI Marked) including necessary fittings (ISI Marked) such as bend, tee, elbow etc complete laid in floor / fixed on wall complete all as directed. |
| 14 | All as per item No. 13 here in above but for 20 mm bore |
| 15 | All as per item No. 13 here in above but for 25 mm bore |
| 16 | Supplying and laying of UPVC pipes 90 mm bore.0.4 Mpa class 2(4 kg/cm2) ISI marked along with fittings in trenches/wall/celing complete all as specified. |
| 17 | M&L for jointing MS ERW pipe 25 mm bore of pipe,spigot and socket and MS fittings,Nut ,bolts and washer complete all as specified and directed by Engr-in-charge .(Item is to be executed at existing pipeline cutting existing pipeline and inserting MS pipe with complete fabricated work is included in the job) |
| 18 | M&L for jointing MS ERW pipe 50 mm bore of pipe,spigot and socket and MS fittings,Nut ,bolts and washer complete all as specified and directed by Engr-in-charge .(Item is to be executed at existing pipeline cutting existing pipeline and inserting MS pipe with complete fabricated work is included in the job) |
| 19 | S&F in repair Bib taps, standard of PTMT any colour high pressure screwed for iron pipe and fixed to 15 mm bore pipe. |
| 20 | S&F 15mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 15mm bore, complete, all as specified & directed. |
| 21 | All as per item No. 20 here in above but for 20 mm bore |
| 22 | All as per item No. 20 here in above but for 25 mm bore |
| 23 | All as per item No. 20 here in above but for 40 mm bore |
| 24 | All as per item No. 20 here in above but for 50 mm bore |
| 25 | Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 80 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 80 mm bore, complete, all as specified & directed |
| 26 | Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 100 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 100 mm bore, complete, all as specified & directed |
| 27 | Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 150 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 150 mm bore, complete, all as specified & directed |
| 28 | Material and labour for cast iron Air valves with two air outlet 80mm dia and fixed to GI / DI water pipes all as specified and as directed. |
| 29 | S&F Rubber Gasket Packing for different sizes of Sluice/foot valves of 6 mm thickness . |
| 30 | Cutting existing steel tubing for alterations or additions for screwing existing steel tubing for alterations / additions/ lengthening screw as ordered on pipe to form connector to 15 mm bore of pipe complete all as directed. |
| 31 | All as per item No. 30 here in above but for 20 mm bore |
| 32 | All as per item No. 30 here in above but for 25 mm bore |
| 33 | All as per item No. 30 here in above but for 40 or 50 mm bore |
| 34 | Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 15 mm,Complete all as specified and directed . |
| 35 | M&L for Straight plain brass ferrules (or connecting screws ) screwed both ends and fixed to water mains for tapping branch connection of size 15 mm bore,Complete all as specified and directed by Engineer-in-charge. |
| 36 | M&L for repacking stuffing box of sluice valve spindle including taking part and reassembling of size 300mm dia,complete all as specified and directed. |
| 37 | Material and labour for Cast Iron bends, tapers, tee pieces, cross, collars, caps and plugs any type, radius & angle for pipes up to 250mm bore conforming to IS-1538: 1993 all as specified and as directed. |
| 38 | M&L for Gland packing any dia as per requirement complete all as specified and directed. |
| 39 | S & F in repair of Automatic Pressure Booster Pump of capacity (0.5 Hp) for Bathrooms. Make havells,Btali or Equivalent.Complete all as specified and directed. |
| 40 | Dismantling the old damaged valve chamber complete and removing the debries of demolished material to a distance not exc 50 mtr for disposal, cleaning the site and Construction of new valve chamber of size 1200mm x 1200mm x1200mm internal dimensions complete of brick masonry of 23cm thick in cement mortar 1:6 on PCC 1:4:8 fountation 75 mm thick using 40 mm graded stone aggregate, coping in concrete 1:3:6 for 10 cm thick at the top of brick wall using 20 mm graded stone aggregate and 10 mm thick plastering in 1:4 cement mortar on exposed MS cover of 3.15 mm thickness including 40mm x40mm x6mm angle iron frame fixed with the same size of angle iron hold fast, handle with locking arrangement, two coats of synthetic enamel paint over coat of red oxide primer on steel surfaces and two coat of white wash on the plasterd / concrete surfaces. complete all as specified and directed. |
| 41 | All as per item No. 40 here in above but for internal size 600 mm x 600 mmx 600 mm -do- |
| 42 | Cutting of grass, vegitation, bushes and small tree branches etc by manually or machine and depositing where directed n exc 100 mtr away and cleaning the entire area of the installation or along the pipe line to the satisfaction of Engineer-in-charge . |
| 43 | S&F in repair tyre coupling for centrifugal pump set of capacity 25 HP,using a flexible rubber tyre element to absorb shocks,dampen vibrations and accommodate shaft misalignment during operation,complete all as specified and directed. |
| 44 | M & L for mechanical joints CI/DI of dia 100 mm complete all as specified & as directed by Engineer-in-charge. |
| 45 | M & L for mechanical joints for CI/DI pipe of dia 150mm complete all as specified & as directed by Engineer-in-charge. |
| 46 | S&F in repair single phase openwell submersible pump of capacity 1 Hp,suction and discharge (25x25mm),head not less then 14 mtr,discharge not less then 1.30 Ltr/sec,Make kirloskar or Equivalent,Complete all as specified and directed by Engineer-in-charge. |
| 47 | M&L for spray painting of all metal surfaces of pump house comprising 3 nos of high lift pump capacity 120 hp,120 hp,100 hp,3 nos of low lift pump capacity 20 hp,including their respective LT Panels,pipe line and header in pump house and all valve base frame in filtration plant,and stairs and railing of jackwell with two coats of synthetic enamel heat resistant paint matching to existing colour over a coat of red oxide primer by spray gun machineincluding preperation of old painted surfaces/removing old faded/rust/cemented material of surface of complete all as specified and directed. Please Enable Macros to View BoQ information |
| 48 | M&L for spray painting of all metal surfaces of pump house comprising 3 nos of high lift pump capacity 120 hp,120 hp,100 hp,3 nos of low lift pump capacity 20 hp,including their respective LT Panels,pipe line and header in pump house and all valve base frame in filtration plant,and stairs and railing of jackwell with two coats of synthetic enamel heat resistant paint matching to existing colour over a coat of red oxide primer by spray gun machineincluding preperation of old painted surfaces/removing old faded/rust/cemented material of surface of complete all as specified and directed. Please Enable Macros to View BoQ information |
