|
| 1 | Labour engaged for removal of old plaster/flooring, cutting of grass, shrubs, roots of trees from terrace, sides of buildings and over various stretches etc including other works wherever labour shall be required as per direction of Engineer in charge. |
| 2 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 3 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead .With cement mortar 1:4 (1 cement : 4 coarse sand) |
| 4 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 5 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In all colours, shades, except White, Ivory, Fume Red Brown |
| 6 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Profile B Fixing with adjustable lugs with split end tail to each jamb |
| 7 | Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of :12 mm thick pre-laminated particle board (decorative lamination on one side and other side balancing lamination) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and prelaminated conforming to IS: 12823, Grade-I, Type-II marked : |
| 8 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood 35mm |
| 9 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class Kail wood 35mm |
| 10 | Renewing glass panes, with wooden fillets wherever necessary :Float glass panes of thickness 4.0 mm (weight not less than |
| 11 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 13 | Carpenter engaged for repair of old doors,windows and refixing them whereever required complete job. |
| 14 | Tractor Trolley engaged for disposal of unserviceable materials incl loading, unloading all complete job |
| 15 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 liter low level whiteP.V.C. flushing cistern, including flush pipe with manually controlleddevice (handle lever), conforming to IS:7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. |
| 16 | Providing and fixing solid plastic seat with lid for pedestal type W.C.pan complete: White solid plastic seat with lid. |
| 17 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 18 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 19 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 literwhite P.V.C automatic flushing cistern |
| 20 | Providing and fixing 15 mm nominal bore C.P. brass angle valve forbasin mixer and geyser points of approved make conforming to IS : 8931 |
| 21 | Providing and fixing brass bib cock of approved quality. 15 mm nominal bore |
| 22 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C waste fittings complete: Flexible pipe 40 mm dia |
| 23 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete: 10 liter capacity -White |
| 24 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cockof approved quality conforming to IS standards and weighing not lessthan 810 gms |
| 25 | Providing and fixing PTMT Waste Coupling for wash basin and sink, ofapproved quality and colour: Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms. |
| 26 | Providing and fixing S.S Grating of approved quality with all necessary fittings and accessories. Circular type |
| 27 | Providing and fixing 600x120x5mm glass shelf with edges round offsupported on anodized aluminum angle frame with C.P. brass bracketsand guard rail complete fixed with 40 mm long screws, rawl plugs, etc.complete |
| 28 | Providing and fixing mirror of superior glass (of approved quality) and ofrequired shape and size with plastic moulded frame of approved makeand shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 29 | Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 15 mm nominal bore |
| 30 | Providing and fixing G.I. Union in G.I. pipe including cutting andthreading the pipe and making long screws etc. complete (new work) 25 mm nominal bore |
| 31 | Providing and fixing G.I. Union in G.I. pipe including cutting andthreading the pipe and making long screws etc. complete (new work) 20 mm nominal bore |
| 32 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete 25 mm nominal bore |
| 33 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete 20 mm nominal bore |
| 34 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm)of approved make and quality as per direction of Engineer-incharge. |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 25mm nominal outer dia pipes. |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge External work including trenching, refilling etc. 62.50mm nominal outer dia pipes. |
| 37 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 110 mm diametre |
| 38 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring Coupler 110 mm |
| 39 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring Bend 110 mm |
| 40 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring Tee 110 mm |
| 41 | Supplying and fixing C.I. cover without frame for manholes: 455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. |
| 42 | Providing 2.0 H.P single phase submersible pump for water supply of ISI approved brand including all necessary fitting, accessories, leads, lifts, carriage all complete job (NSI) |
| 43 | Rewiring for light point/fan/exhaust fan point / call bell point with f 1.5sq FRLS PVC insulated copper conductor single core cables with 1.5 sqmm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required. Group A |
| 44 | Providing Wire 10 sqmm NSI |
| 45 | Providing Wire 4 sqmm NSI |
| 46 | Providing Wire 2.5 sqmm NSI |
| 47 | Providing Wire 1.0 sqmm NSI |
| 48 | Supplying and fixing following way.Three pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as zequired. (But without MCB/RCCB/Isolator) Double Door. A. 4 way (4 + 12), Double door. |
| 49 | Supplying and fixing following rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.MCB single pole 6 A to 32 A |
| 50 | Supplying and fixing following rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. MCB Double pole 63 A |
| 51 | Supplying and fixing following modular switch/socket on the existing modular plate & box as required 5/6 A Switch |
| 52 | Supplying and fixing following modular switch/socket on the existing modular plate & box as required 15/16 A Switch |
| 53 | Supplying and fixing following modular switch/socket on the existing modular plate & box as required 3 Pin 5/6 A Socket Outlet |
| 54 | Supplying and fixing following modular switch/socket on the existing modular plate & box as required 6 Pin 15/16 A Socket Outlet |
| 55 | Supplying and fixing following modular base & cover plate on the existing modular metal box as required 1 or 2 module |
| 56 | Supplying and fixing following modular base & cover plate on the existing modular metal box as required 3 module |
| 57 | Supplying and fixing following modular base & cover plate on the existing modular metal box as required 4 module |
| 58 | Supplying and fixing following modular base & cover plate on the existing modular metal box as required 6 module |
| 59 | Supplying and fixing following modular base & cover plate on the existing modular metal box as required 8 module |
| 60 | Supplying and fixing following modular base & cover plate on the existing modular metal box as required 12 module |
| 61 | Supplying and fixing following modular GI Box in recess as required 1 or 2 module |
| 62 | Supplying and fixing following modular GI Box in recess as required 3 module |
| 63 | Supplying and fixing following modular GI Box in recess as required 4 module |
| 64 | Supplying and fixing following modular GI Box in recess as required 6 module |
| 65 | Supplying and fixing following modular GI Box in recess as required 8 module |
| 66 | Supplying and fixing following modular GI Box in recess as required 12 module |
| 67 | Supply installation testing and commissioning of BLDC Ceiling Fan 1200 mm 230V 28 W with Speed RPM 350 with minimum Air delivery 220 CMM including wiring the down rods of standard length(Upto 30 cm) with 1.5 sq.mm FR PVC insulated,copper conductor,single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as Required. |
| 68 | Supplying and fixing Modular Fan regulator. |
| 69 | Supply installation testing and commissioning of IP:20 Aluminium Batten 20W-22 W +- 1 W LED Surface Mounted 4 ft. with system lumen efficacy of 100 lm/W and P.F >0.9 THD <20% CCT 6500K, CRI 80. The LED should have life of 50000 Burning Hours at L70.The input voltage shall be 150 V to 270 V. The fixture should have inbuilt surge protection of 2KV.Certification-LM 79 and LM 80. |
| 70 | Supply installation testing and commissioning of LED Bulbs with holders 14- 20 W with 1.5 sq.mm FR PVC insulated,copper conductor,single core cable including all necessary fittings and accessories. |
| 71 | Supply installation testing and commissioning of LED Lights with holders 50-100 W ( OUTDOOR) with 2.5 sq.mm FR PVC insulated,copper conductor,single core cable including all necessary fittings and accessories. Please Enable Macros to View BoQ information |
