Name of Work:- Installation of Aluminum Cabin at Community Hall, MC Surankote. (Under FC Grants)
Sl. No.
Item Description
1
Providing and fixing aluminum work for doors, windows.ventulators and partitions with extruded built up standard tubulat sections/appropriate 7 sections and other sections of approved make conforming to IS. 733 and IS. 1285, fixed with dash fastener of required dia and size including necessary filling up of gaps at junctions i c, at top, bottom and sides with required EPDM rubber /neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC 15).
2
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.
3
Providing and fixing glazing in aluminum door, window,ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap bead. With float glass panes of 8 mm thickness (weight not less than 20.0 kg/sqm) Oty wide 50% of 2(A).
4
Providing and fixing Brass 100mm mortice latch and lock with levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
5
Providing and fixing aluminum round shape handle of outer dia100mm with SS screws etc. Complete as per direction ofEngineer-in-charge Polyester powder coated minimum thickness 50 microns aluminum.
6
Providing and fixing double action hydraulic floor spring ofapproved brand and manufacture IS: 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheetouter box with slide plate etc. complete as per the direction of Engineerin-plate etc. complete as per the direction of Engineer-incharge. With brass cover plate minimum 1.25 mm thickness.
7
Providing and fixing 600x450 mm beveled edge mirror ofsuperior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
8
Providing and fixing of wall fan approved brand all complete as per necesity of site. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
