|
| 1 | Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m(including all materials, labour cess, taxes etc but excluding GST) |
| 2 | Construction of Embankment with Material obtained from Right of way: Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.(including all materials, labour cess, taxes etc but excluding GST) |
| 3 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (including all materials, labour cess, taxes etc but excluding GST) |
| 4 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam (WMM) specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (including all materials, labour cess, taxes etc but excluding GST) |
| 5 | Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.(including all materials, labour cess, taxes etc but excluding GST) |
| 6 | Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects.(Grade2)(including all materials, labour cess, taxes etc but excluding GST) |
| 7 | Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.(including all materials, labour cess, taxes etc but excluding GST) |
| 8 | Providing and laying bituminous concrete with higher capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects(including all materials, labour cess, taxes etc but excluding GST) |
| 9 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2(including all materials, labour cess, taxes etc but excluding GST) |
| 10 | Providing and Laying of Rubber moulded (Red colour) Interlocking Concrete Block Pavements having thickness 80 mm including leveling and dressing of surface to required level and slope, spreading and moisting 30m thick local sand on bend, filling joints with local sand on bend, filling joints with local sand etc. for proper completion of the work as per drawings and Technical Specification Clause 1504.(including all materials, labour cess, taxes etc but excluding GST) |
| 11 | Providing and Laying of Rubber moulded (Grey colour) Interlocking Concrete Block Pavements having thickness 80 mm including leveling and dressing of surface to required level and slope, spreading and moisting 30m thick local sand on bend, filling joints with local sand on bend, filling joints with local sand etc. for proper completion of the work as per drawings and Technical Specification Clause 1504. (including all materials, labour cess, taxes etc but excluding GST) |
| 12 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.(including all materials, labour cess, taxes etc but excluding GST) |
| 13 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.(including all materials, labour cess, taxes etc but excluding GST) |
| 14 | RCC Grade M20 using batching plant transit mixer & manual placing(including all materials, labour cess, taxes etc but excluding GST) |
| 15 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. (including all materials, labour cess, taxes etc but excluding GST) |
| 16 | Sand Filling in Foundation Trenches as per Drawing & Technical Specification(including all materials, labour cess, taxes etc but excluding GST) |
| 17 | Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications.(including all materials, labour cess, taxes etc but excluding GST) |
| 18 | Struck pointing with cement mortar consisting 1 part cement and 2 parts of sand of 1.25 fineness modulus including supply of all materials labour and T&P etc. required for proper completion of the work. As per SOR No-574(including all materials, labour cess, taxes etc but excluding GST) |
| 19 | Providing & laying HP 600mm dia NP-3 with coller etc. complete.(including all materials, labour cess, taxes etc but excluding GST) |
| 20 | Providing & laying HP 1000 mm dia NP-3 with coller etc. complete.(including all materials, labour cess, taxes etc but excluding GST) |
| 21 | Providing and laying boulder pitching(including all materials, labour cess, taxes etc but excluding GST) |
| 22 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per som area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35-2015 The finished surface to be level, uniform and free from streaks and holes.(including all materials, labour cess, taxes etc but excluding GST) |
| 23 | Supply and fixing of Raised Pavement marker (Cat Eyes) of Avery Dennision/3M make of approved quality in size of width not exceeding 20 mm and height not exceding 20 mm made up to strong Engineering Polymer thermoplastic polyurethene with Electronic welded abrasion resistant lenses for Retro Reflective in dry and wet weather condition alone with Bituminous adhesive as per MORTH Specification.(including all materials, labour cess, taxes etc but excluding GST) |
| 24 | Reinforced cement concrete M15grade Hectometer Stone of standarddesign as per IRC:8, fixing in position including painting and printing etc (Hectometer Stone)(including all materials, labour cess, taxes etc but excluding GST) |
| 25 | Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc (Ordinary kilometer stone (precast)(including all materials, labour cess, taxes etc but excluding GST) |
| 26 | Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of High Intensity grade sheeting lause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4 mm with area exceeding 0.9 sqm fixed over back support frame of min 40 x 40 x 5 mm MS Angle mounted on two nos. of mild steel circular pipe 65 NB ,3.2 mm thicknness and 4.5 meter total height firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (including all materials, labour cess, taxes etc but excluding GST) |
| 27 | Supply, fixing & eraction of built up Cantilever Structure 6m span comprising of one vertical posts of 6.00 m height made up of 300mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12mm plate of bottom. The horizontal Truss shall comprise of 50mm dia heavy class MS pipe and 40 mm dia heavy MS pipe as bracing and 10 mm MS plate at bottom for fixing to vertical post as per structure design and drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of Size 90X90m of required depth as per site condition for built up structure including Earth work in excavation 100mm thick lean concrete in 1:4:8 cement coarse sand and 40 mm guage stone ballast RCC withand 1:2:4 cement coarse sand and 20 mm stone grit including supply and fixing of 25mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete. Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67:2010 complete in all respect. The Rates shall include cost of design fabrication supply, transportation, Local shifting Erection of Signage structure using crane, inclusive of all taxes royelty, VAT etc. all T&P machine, material and labour required for proper completion of work as per direction of E/I.)(including all materials, labour cess, taxes etc but excluding GST) Please Enable Macros to View BoQ information |
