|
| 1 | Dismantling B.M. in cement mortar under 3mtr height including stacking the useful materials for re-use & removing the debries away from work site within 50mtr lead (Data for 3.83Cum) |
| 2 | Earth work Excavation in hard soil in F&P within intial lead and lift including rough dressing and levelling the ground etc. complete. |
| 3 | Supplying and filling F&P with river sand with well watering and ramming etc. complete. |
| 4 | Supplying all materials, labour, T&P and providing Cement Concrete (1:4:8) using 4 cm size CB metal etc. complete. |
| 5 | Supplying all materials, labour, T&P and providing Flyash brick masonary in cement mortar (1:4) in F&P etc. complete. |
| 6 | Supplying all materials, labour, T&P and providing Reinforced Cement Concrete (1:1.5:3) using 12mm to 20mmsize BHGCB chips including centering and shuttering etc. complete. |
| 7 | Raft foundation |
| 8 | Lintel |
| 9 | Roof Slab |
| 10 | Supplying, fitting & placing uncoated HYSD reinforcement including cutting, bending,binding & placing the steel rods as per drawing & technical specifications with cost of binding wire 18 to 20 gauges, etc., complete. |
| 11 | Supplying all materials, labour, T&P for providing 3.75 CM thick D.P.C. using C.C. (1:2:4) with 12mm size H.G. stone chips |
| 12 | Supplying all materials, labour, T&P and providing Flyash brick masonary in cement mortar (1:6) in superstructure etc. complete. |
| 13 | Supplying all materials, labour, T&P and providing Cement Concrete (1:2:4) using 12 to 20mm size BHGCB chips etc. complete. |
| 14 | Providing 12 mm thick CP(1:6) to out side smooth surface etc. complete. |
| 15 | Providing 16 mm thick CP(1:6) to in side smmoth surface etc. complete. |
| 16 | Supplying, fitting and fixing of WPC in Door&windows (Frame with Shutter) including screws as may be required etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 17 | Supplying all materials, labour, T&P for Fixing of ceramic glazed antiskid double charged premium tiles in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including the cost of pre-cast tiles etc. complete. |
| 18 | Supplying all materials, labour, T&P for Fixing of chequered tiles in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including the cost of pre-cast tiles etc. complete. |
| 19 | Supplying all materials, labour, T&P for Fixing ceramic glazed wall tiles in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of precast tiles etc. complete. |
| 20 | Wall painting two coats & Priming one coat with plastic emulsion paint of approved shade on new work to give an even shade excluding cost of paint |
| 21 | Supplying all materials, labour, T&P for applying two coats of weather coat painting over a coat of primer to out side and inside wall surface etc. complete. |
| 22 | Providing 12 mm thick CP(1:4) with punning over brick work /surface etc. complete. |
| 23 | Providing 6 mm thick CP(1:4) over RCC surface etc. complete. |
| 24 | Supplying all materials, labour, T&P and cutting holes in brick or stone masonry wall for taking G.I. pipes, HCI pipes, and mending good the damages 375mm thick wall. |
| 25 | Providing and Fixing half stall urinal flat back conforming to IS 2556 : Part 6-1996 including connecting the urinal of (610 x 510 x 200)mm with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification. |
| 26 | Fixing 100mm size ‘P’ or ‘S’ trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification etc complete. |
| 27 | Providing and fixing to wall, ceiling and floor the pipe fittings of following nominal bore with clamps; including making good the wall ceiling and floor, all complete in ground floor (including the cost of materials ) as per the PHE specification and direction of the Engineer-in-charge.( Sch-80, ASTM-D-1785/2004) |
| 28 | 15mm dia UPVC pipe |
| 29 | 25mm dia UPVC pipe |
| 30 | 40mm dia UPVC pipe(Considering 10m distance of main pipe line) |
| 31 | Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. (PlazA/Ciser/Zigma) |
| 32 | 50mmx800mm long PVC urinal waste pipe |
| 33 | 15mm dia c.p concealed stop cock |
| 34 | 25 mm PVC Ball Valve |
| 35 | C.P.grating |
| 36 | 15mm dia c.p. pillar cock |
| 37 | 32mm CP Waste |
| 38 | 15mmx600mm PVC connection pipe |
| 39 | 40 mmUPVC-ASTM Ball Valve |
| 40 | 18\\"x 16\\"x8\\" STEEL basinsingle bowl(Mousumi ) |
| 41 | CP urinal Push cock 15mm dia |
| 42 | 32 mm PVC long flush bend |
| 43 | HEALTH FUSSET |
| 44 | Floor trap (200mm.x100mm. dia.) :- |
| 45 | Providing, fitting, fixing P.V.C SWR pipe of standard manufactures, including all jointing, earthwork in excavation of trenches in all kinds of soil up to a depth of 0.9mtr. and refilling the trench in 0.3mtr. layers duly watered and rammed or fixing to walls with supply of naiks, bobbings, wall plugs all complete as per the PHD specification and the direction of the Engineer-in-charge. |
| 46 | 110mm dia PVC SWR pipe S/S |
| 47 | 110 mm PVC Door bend |
| 48 | 110 mm PVC Plain Bend |
| 49 | 110mm dia P.V.C. SWR Cowl |
| 50 | 75mm PVC SWR Pipe |
| 51 | 75mm PVC SWR Bend |
| 52 | 750 Lts Capacity PVC Tank(ISI Mark)including conveyance of all materials to worksite etc all complete as per specification and direction of Engineer-in-charge. |
| 53 | Providing 12 mm thick CP(1:4) with punning and two coats of bitumein painting over top of wall etc. complete. |
| 54 | Conveyance of excavated earth by mechanical means within 5 km lead etc. complete. |
| 55 | Cost of 40mm size CBHG metal including labour for filling the trench /well with cost conveyance royality etc. |
| 56 | Cost of 20mm size CBHG Chips including labour for filling the trench /well with cost conveyance royality etc. |
| 57 | Supplying , fitting , and fixing of motor of ISI Mark 0.50 HP Single Phase Pump Set with starter to make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charage.texmo |
| 58 | Add cost of flower pot, signage, dust bin, exhaust fan, external and internal electrification etc complete. Please Enable Macros to View BoQ information |
