Tender For Construction Of Road From Chapong To Ren Teron Village Road, L=5.00 Km For The Year Of 2025-26.
Tender Value
4.16 Crore
Estimated cost
Bid Submission
10 Mar 2026
0 days left
EMD
8.33 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
diphu → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Road From Chapong To Ren Teron Village Road, L=5.00 Km For The Year Of 2025-26.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting wild vegetation, grass bushes, shurbs, saplings and trees girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking serviceable material to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. (ii) By Mechanical Means (A) In area of non-thorny jungle |
| 2 | Excavation in Ordinary rock using manual means including loading in truck and in carrying of excavated material to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3.5 |
| 3 | Construction of Subgrade and Earthen shoulder with approved materials obtained from borrow pits with all lifts and leads transporting to site, spreading,grading to required slope and compacted to meet requirement of table 300.2 with lead up to 1000 m as per Technical Specification clause 303.1 (i) Private Land |
| 4 | Construction of Granular sub-base by providing closed graded materials spreading in uniform layers with motor grader on prepared surface, mixing by mix method with rotavator roller to achieve the desired dencity as per Tecnical Specification (ii) grading II (I) For grading II material |
| 5 | Providing and fixing 'Logo' of PMGSY Project Providing and fixing of typical PMGSY informatory sign board with logo as per MORD specifications and drawing. Three MS plates of 1.6 mm thick, top and middle plate will be welded with MS flate iron 25 mm x 5 mm x size on back on edge. The lower plate will be welded with MS i angle iron 25 mm x 5 mm x 5 mm. The anfle iron frame of the lower most plate and flate iron frame of middle plate will be welded to 2 nos. 75 mm x 75 mm of 12 SWG sheet tube post duly embeded in cement concrete M15 grade blocks of 450 mm x 450 mm x 600 mm , 600 mm below ground level. The top most diamond plate will be welded to middle plate by 47 mm x 47 mm of 12 SWG steel plate tube. ALL MS will be stope enameled on both sides. Lttering and printing arrows, bordes etc. will be painted with ready mixed synthetic emnamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted and two coats of epoxypaint as per specification clause 1701 and Annexure 1700.1 |
| 6 | Construction of 1000 mm dia HP Culvert Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Mar 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedMar 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender