|
| 1 | Scraping of White wash and colour wash |
| 2 | Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade |
| 3 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. |
| 4 | Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm) (A) Double Rebate (60mm x 150mm) (60mm x 150mm) |
| 5 | Dismantling of brick work in cement sand mortar / lime mortar including T&P scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material.& staking the serviceable material with all lifts & lead of 100 metre (By Mechanical Means) |
| 6 | First class burnt brick work laid in cement sand mortar 1:6in first storey upto 4 metres above plinth level |
| 7 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications |
| 8 | PCC 1:2:4 With stone ballast or shingle |
| 9 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified |
| 10 | Painting two or more coats with synthetic enamel paints in all shades on old wood workor metallic or plastered or concrete surface togive an even shade including rubbing down old paint |
| 11 | Providing & Fixing glass panes with nails and putty or wooden strip complete in all respec |
| 12 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology ( thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades ,laid on 20 mm thick cement mortar 1:4 size 600X600 mm complete in all respect . |
| 13 | Providing and fixing Morwad Marble Strip 12mm to 15mm thick and 100 mm wide in kotah stone flooring over 12.50mm thickness base of cement mortar 1:3 jointed with cement slurry including cost of additional mortar equivalent to the kota stone thickness andcolouring pigment to match the colour rubbed and polished to granolithic finish complete in all respects. |
| 14 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqmincluding pointing in white cement mixed with pigment of matching shade complete. |
| 15 | Applying priming coat with metal primer on new steel or iron work including preparation of surface |
| 16 | Painting one coat with aluminum paint on old work to give an even shade |
| 17 | Providing & fixing 9\\" stainless steel handles ISI marked on door & windowframes complete in all respect as per the directions of Engineer-in-charge |
| 18 | Providing & fixing 8\\" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. |
| 19 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.i) C.P. brass Bib cock long nose/ long body foam flow without flange |
| 20 | iv) Brass Bib cock/Stop cock 15mm x 400gm |
| 21 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. b) CPVC SDR 11 Pipe & fitting 20mm o/d |
| 22 | C) SDR 11 CPVC pipes & fittings 25mm o/d |
| 23 | Providing and fixing Chinware Cistern (Dual flush) 10 Ltr. Capacity with PVC internal fitting. (Size 38x43x17.5 cm) of approved make (to the approval of theEngineer-in-charge) including PVC fittings and brackets complete |
| 24 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. |
| 25 | Cutting holes upto 23cm square for pipes in flooring and roofs of bricks, tiles with lime concrete or cement concrete and making good the same & finishing according to existing finish where required. |
| 26 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects |
| 27 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. |
| 28 | Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M- 40 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge. |
| 29 | Cement concrete 1:8:16 With brick ballast 20mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 30 | Aluminium door(2.5X6)FT Please Enable Macros to View BoQ information |
