|
| 1 | MERRY-GO-ADAPTMain Structure Material: Galvanise Steel (GI) ERW Pipes ISIMarked IS1239 Minimum 90 mm outer diameter (OD), 2.0–3.0mm thickness Surface Finish Zinc primer plus outdoor-gradepolyester powder coating (min. 60–80 microns), Bending withfully automatic Pipe BendingMachine, Welding With Laser Welding Heigh Power Machine.,Bending with fullyautomatic Pipe Bending Machine, Welding With LaserWelding Heigh Power Machine. Support Structure Material:Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 40 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor- grade polyester powder coating (min. 60–80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fullyautomatic Pipe Bending Machine, Welding With LaserWelding Heigh Power Machine. Wheel Chair Safety Door: CRsheet (1.6–2.0 mm thick) Manufacturing: CNC laser-cut withanti-slip perforated texture Finish: Hot-dip galvanized pluspowder coating Load Capacity: Minimum 150 kg per platform. mgr Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60–80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playground structures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut. Pins: are made up of M.S bright bar. Bearing bushes: 089mm OD seamless pipe. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Antirust, tamper-resistant, non-toxic. Fasteners Material:Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposedbolts. Surface Coating Primer: Epoxy zinc-rich primer (40microns) Top Coat: Outdoor polyester powder (60–80 microns) Adhesion: 5B rating (ASTM D3359) Color Options:Custom RAL shades, UV-stabilized Safety Compliance Standards: EN 1176 (Europe)ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing(optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 2 | NS Item -PLAYFUL PANELMain Structure Material: Galvanise Steel (GI) ERW Pipes ISIMarked IS1239 Minimum114 mm outer diameter (OD), 2.0–3.0 mm thickness SurfaceFinish Zinc primer plus outdoor- grade polyester powdercoating (min. 60–80 microns), Bending with fully automaticPipe Bending Machine, Welding With Laser Welding HeighPower Machine., Bending with fullyautomatic Pipe Bending Machine, Welding With LaserWelding Heigh Power Machine. Play panel designed foroutdoor playgrounds. Crafted from durable 3 layer HDPEsheets 20 mm thik and precision router-cut for engaginggraphics through play. Clamps and Connectors Material: Diecastaluminium or aluminium alloy Finish: Natural anodized orpowder coated Properties: Anti-rust, tamper-resistant, nontoxic.Fasteners Material: Galvanized Iron (GI), zinc-coatedType: Tamper-proof bolts and nuts Rust Resistance: Min. 500hours salt spray test protection: Plastic safety caps onexposedbolts. Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60–80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RALshades, UV-stabilized Safety Compliance Standards: EN 1176 (Europe)ASTMF1487 (USA)Fall Height: Compliant up to 2.5 meters Surfcing(optional): Prevention: No head, neck, or finger entrapmentzones Edge Protection: Rounded corners, no sharp edges.Installation: RCC blocks or anchor bolts with M20 groutingInstallation: Certified team withadherence to manufacturer`s layout Tools and Hardware:Supplied with the product SitePreparation: Level ground,drainage recommended. |
| 3 | WHEELCHAIR Providing and supplying standardmanual wheelchair made of high-quality powder- coated/mildsteel tubular frame with durable, corrosion-resistant finish.The wheelchair shall be foldable type for easy storage andportability. Technical Specifications: Frame: MildSteel/Aluminum, powder-coated finish Seat Width: Approx. 18inches (450 mm), made of durable, washable canvas or PVCupholstery Backrest: Fixed/Foldable with reinforced supportWheels: Rear wheels: 24` solid rubber with hand rims for selfpropellingFront wheels: 8` PU/solid rubber caster wheelsBrakes: Manual parking brakes on both rear wheels Footrests:Foldable/Detachable, height-adjustable with heel supportstrap Armrests: Fixed or flip-up cushioned armrests LoadCapacity: Minimum 100 kg Foldable Design: For convenientstorage and transportation Warranty: Minimum 1 year againstmanufacturing defect |
| 4 | CHEERFUL CHURN Main Structure Material:Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0–3.0 mm thickness SurfaceFinish Zinc primer plus outdoor-grade polyester powdercoating (min. 60 – 80 microns), Bending with fully automaticPipe Bending Machine, Welding With Laser Welding HeighPower Machine., Bending with fully automatic Pipe BendingMachine, Welding With Laser Welding Heigh Power Machine.Support Structure Material: Galvanise Steel (GI) ERW PipesISI Marked IS1239 Minimum 40 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoorgradepolyester powder coating (min. 60 – 80 microns),Bending with fully automatic Pipe Bending Machine, WeldingWith Laser Welding Heigh Power Machine., Bending with fullyautomatic Pipe Bending Machine, Welding With LaserWelding Heigh Power Machine. Wheel Chair Safety Door: CRsheet (1.6–2.0 mm thick) Manufacturing: CNC laser- cut withanti-slip perforated texture Finish: Hot-dip galvanized pluspowder coating Load Capacity: Minimum 150 kg per platform.mgr Base Material: Checker Sheet 3mm Process with CNCLaser Machine, Surface Finish Zinc primer outdoor-gradepolyester powder coating (min. 60–80 microns), Bending withfully automatic Pipe Bending Machine, Welding With LaserWelding Heigh Power Machine., Bending with fully automaticPipe Bending Machine, Welding With Laser Welding HeighPower Machine. |
| 5 | SIT `N` SNICKER SWING - Main Structure Material:Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum90 mm outer diameter (OD), 2.0–3.0 mm thickness SurfaceFinish Zinc primer plus outdoor-grade polyester powdercoating (min. 60 – 80 microns), Bending with fully automaticPipe Bending Machine, Welding With Laser Welding HeighPower Machine., Bending with fully automatic Pipe BendingMachine, Welding With Laser Welding Heigh Power Machine.Support Structure Material: Galvanise Steel (GI) ERW PipesISI Marked IS1239 Minimum 40 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoorgradepolyester powder coating (min. 60 – 80 microns),Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fullyautomatic Pipe Bending Machine, Welding With LaserWelding Heigh Power Machine. Wheel Chair Safety Door: CRsheet (1.6–2.0 mm thick) Manufacturing: CNC laser- cut withanti-slip perforated texture Finish: Hot-dip galvanized pluspowder coating Load Capacity: Minimum 150 kg per platform.Swing Base Material: Checker Sheet 3mm Process with CNCLaser Machine, Surface Finish Zinc primer outdoor-gradepolyester powder coating (min. 60 – 80 microns), Bending withfully automatic Pipe Bending Machine, Welding With LaserWelding Heigh Power Machine., Bending with fully automaticPipe Bending Machine, Welding With Laser Welding HeighPower Machine. |
| 6 | XOXO PANEL Main Structure Material: GalvaniseSteel (GI) ERW Pipes ISI Marked IS1239 Minimum 114 mmouter diameter (OD), 2.0–3.0 mm thickness Surface FinishZinc primer plus outdoor-grade polyester powder coating(min. 60 – 80 microns), Bending with fully automatic PipeBending Machine, Welding With Laser Welding Heigh PowerMachine., Bending with fully automatic Pipe Bending Machine,Welding With Laser Welding Heigh Power Machine. Playpanel LLDPE (Linear Low-Density Polyethylene), rotomouldedThickness: 6–8 mm wall thickness. Finish Seamless,anti-static, smooth surface UV Resistance. Clamps andConnectors Material: Die-cast aluminium or aluminium alloyFinish: Natural anodized or powder coated Properties: Antirust,tamper-resistant, non-toxic. Fasteners Material:Galvanized Iron (GI), zinc-coated Type: Tamper-proof boltsand nuts Rust Resistance: Min. 500 hours salt spray testprotection: Plastic safety caps on exposed bolts. |
| 7 | ARM REVOLVE ASSISTMain Frame: 0114 *3 mm thick M.S pipe and subordinate tube is of 088*3.0 large thickness M.S pipe. Handle: is made of 088*3 mm thick Pipe and 025 mm round M.S bright bar inbendingdesign. All remaining frame is made by 088 *3mm thick MSpipe. Weight plates: Rubberized moulding round weight platesare used. Weight Plates Holder with spring lock and spareweights holder: is made by hard chrome plated mild stee!048D!A pipe open front covered with half round cap and holderend is covered with heavy quality rubber ring of OD-68 mmand ID-48 mm with 10mm wallthickness for free weight noiseless operations. Bearing:Lubricated high grade6305 `2RS`steel ball bearing. Baseplate: is OD166, ID 116, and 6 mm thick. Pins: are made up ofM.S bright bar. Bearing bushes: 075mm OD seamless pipe.Weight plate mounting pipe is of 048 mm MS pipe. SeatFrame: made up of hard chrome plated mild steel 48 DIAround pipe. Hardware All hardware`s uses button heads boltsand nuts made up of high tensile steel. Hand grips: Handgrips is used on handles wherever necessary made up ofhigh-qualityrubber and handle ends are covered with aluminum/pp/nyloncaps with grub screw for longendurance. Closing caps: are of PP/NYLON/HDPE materia!.Laser cutting: profiles of 6mm and 4mm thick M.S sheet areused for connectingsubordinates with each other. Rubber: Safety base pads: Antiskidsafety base pads made up superior rubber to preventslippery and damage to floor. Heavy duty 20mm thick rubberpads are placed for restinghandles for noise less operations. 36000Powders Coating: Allcomponents are chemically treated to seal exterior andinterior surfaces against corrosion. The components areelectro statically powder coated at minimum 80-100-micronthickness to make it resistant to scratch, corrosion andhumidity indual color combination. Safety Instructions and Exercise charton machine - start and finish position chart stick on5mm |
| 8 | Sea-Saw Main Structure Material: Galvanised Steel(GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outerdiameter (OD), 2.0–3.0 mm thickness Surface Finish Zincprimer plus outdoor-grade polyester powder coating(min. 60– 80 microns), Bending with fully automatic Pipe BendingMachine, Welding With Laser Welding Heigh Power Machine.Handle and Leg rest Material: Galvanised Steel (GI) ERWPipes ISI Marked IS1239 Minimum 25 mm outer diameter(OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plusoutdoor-grade polyester powder coating(min. 60 – 80microns), Bending with fully automatic Pipe Bending Machine,Welding With Laser Welding Heigh Power Machine. Seat :designed for outdoor playgrounds. Crafted from durable 3layer HDPE sheets 20 mm thik and precision router-cut forSpring: Heavy-duty coil spring, High-carbon steel or alloyspring steel, 18 mm – 20 mm wire thickness, Coil height:Approx. 300 |
| 9 | FISHY FUNNY SEE SAW Main Structure Material:Galvanised Steel (GI) ERW Pipes ISI Marked IS1239Minimum 90 mm outer diameter (OD), 2.0–3.0 mm thicknessSurface Finish Zinc primer plus outdoor-grade polyesterpowder coating(min. 60 – 80 microns), Bending with fullyautomatic Pipe Bending Machine, Welding With LaserWelding Heigh Power Machine. Handle and Leg rest Material:Galvanised Steel (GI) ERW Pipes ISI Marked IS1239Minimum 25 mm outer diameter (OD), 2.0–3.0 mm thicknessSurface Finish Zinc primer plus outdoor-grade polyesterpowder coating(min. 60 – 80 microns), Bending with fullyautomatic Pipe Bending Machine, Welding With LaserWelding Heigh Power Machine. Seat : designed for outdoorplaygrounds. Crafted from durable 3 layer HDPE sheets 20mm thik and precision router-cut for Spring: Heavy-duty coilspring, High-carbon steel or alloy spring steel, 18 mm – 20mm wire thickness, Coil height: Approx. 300 mm. |
| 10 | DUET Main Structure Material: Stainless Steel 304Grade, 1.5–2.5 mm thick pipe or tube Dimensions: Minimum60–32 mm outer diameter (OD), 1.5–2.5 mm thickness CapHDPE Heigh dencity polyetheline 20mm thickness. FastenersMaterial: Stainless steel fasteners are specified to BS EN ISO3506. Part 1 covers bolts, screws and studs. SafetyCompliance Standards: EN 1176 (Europe)ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing(optional): Prevention: No head, neck, or finger entrapmentzones Edge Protection: Rounded corners, no sharp edges.Installation: RCC blocks or anchor bolts with M20 groutingInstallation: Certified team with adherence to manufacturer`slayout Tools and Hardware: Supplied with the product SitePreparation: Level ground, drainage recommended. |
| 11 | All HSR ITEMS (SEE IN DNIT) Please Enable Macros to View BoQ information |
