|
| 1 | Earth work excavation of foundation in stoney earth and gravel mixed with stone boulders with initial lead of 50 mtr and lift of 1.5 mtr including dressing leveling the bed. |
| 2 | Supplying and filling in with clean coarse river sand in foundation and plinth including ramming consolidating with all cost of materials, labour, T. & P. etc. complete. |
| 3 | Plain cement concrete (1:3:6) using 40 mm. size hard crusher broken granite stone metal of approved quality & from approved quarry including lowering, laying the concrete, watering and curing etc. complete to required levels laid in layers including cost conveyance, royalities & taxes of all mateirals & cost of all labour with T & P etc all complete in all respect as per Direction of the Engineer in charge. |
| 4 | Fly ash brick masonry in cement mortar (1:6) including watering and curing etc. complete including cost conveyance, royalities & taxes of all mateirals & cost of all labour with T & P required for the work etc all complete in all respect as per direction of the Engineer in charge in foundation and plinth. |
| 5 | Reinforced Cement Concrete of M-20 grade using 20 mm and down size hard crusher broken granite stone chips of approved quality & from approved quarry including lowering, laying the concrete, watering and curing etc. with cost of centering and shuttering for the work etc all complete to required levels laid in layers including cost, conveyance, royalities & taxes of all mateirals & cost of all labour with T & P required for the work etc all complete in all respect as per Direction of the Engineer in charge. (including centering and shuttering). Foundation |
| 6 | Plinth band |
| 7 | Column and Beam |
| 8 | Lintel band |
| 9 | Roof slab and chajja |
| 10 | Cutting, Straightening coiled or bent up TOR steel, bending, binding, welding and jointing if necessary and tying the grills and placing in position including cost of binding wire 18 to 20 gauge as required for R.C.C. works and providing fan hooks, hoisting, lowering, and laying the grills in floors and others etc. including cost of steel, conveyances, labour, royalties, taxes with T & P etc. all complete in all respect as per the Direction of the Engineer in charge |
| 11 | Fly ash brick masonry in cement mortar (1:6) including watering and curing etc. complete including cost conveyance, royalities & taxes of all mateirals & cost of all labour with T & P required for the work etc all complete in all respect as per direction of the Engineer in charge in super structure. |
| 12 | 16mm thick cement plaster (1:6) after racking out joints including watering & curring etc complete with cost, conveyance royalties & taxes of all materials & all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge |
| 13 | 12mm thick cement plaster (1:6) after racking out joints including watering & curring etc complete with cost, conveyance royalties & taxes of all materials & all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge |
| 14 | 12mm thick cement plaster (1:4) with cement punning for skirting finished smooth including watering & curring etc complete with cost, conveyance royalties & taxes of all materials & all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge. |
| 15 | 6mm thick cement plaster (1:4) over RCC work finished smooth including close deep chipping and slurry treatment including watering & curring etc complete with cost, conveyance royalties & taxes of all materials & all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge. |
| 16 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard broken chips including watering and curing cost, conveyance, royalties & taxes of all & cost of all labour with T & P etc all complete in all respect as per Direction of the Engineer in charge. |
| 17 | Supplying,laying of Vertified tiles on floor over 25mm thick cement mortar (1:1) to proper level including jointed with neat cement slury mixed with pigment to match the shades of the tiles including cost,conveyance,royality of all materials including all labour & T&P charges etc complete as per the direction of the engineer-in-charge. |
| 18 | Supplying,laying of glazed tiles on walls over 12 mm thick cement mortar (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including cost,conveyance,royality of all materials including all labour & T&P charges etc complete as per the direction of the engineer-in-charge. |
| 19 | Supplying, fitting and fixing M.S. door & M.S. window with grill made out of M.S. square bar / M.S. flats / M.S. angles / M.S. sheet as per approved drawing and design, cutting to required size and welding properly, finished smooth by machine grinding and sand papering, including cost, conveyance, taxes of all materials, required screws, cost of all labour, T&P etc. as required for the work complete including the cost of making holes on brick or concrete structure subsequent mending good damages complete as per direction of the Engineer-in-charge. |
| 20 | Painting two coats of synthetic enamel paint over a coat of primer of approved quality and approved shade confirming to ISI on steel work to give an even shade including sand papering and making the surface smooth in all floors at all heights including cost, conveyance,taxes of all materials, labour, sundries, T& P scaffolding required for the work and complete in all respect as per specifications and directions of Engineer-in-charge. |
| 21 | Finishing walls with Weather coat paint ofapproved quality and approved shade confirming to ISI over a coat of primer including watering, curing, cost, conveyance, taxes of all materials, labour, sundries, T& P scaffolding required for the work and complete in all respect as per specifications and directions of Engineer-in-charge to inner and outer face of walls, ceiling, projections. |
| 22 | Finishing walls with Distemper ofapproved quality and approved shade confirming to ISI over a coat of primer including watering, curing, cost, conveyance, taxes of all materials, labour, sundries, T& P scaffolding required for the work and complete in all respect as per specifications and directions of Engineer-in-charge to inner and outer face of walls, ceiling, projections. |
| 23 | Supplying 1.20 mtr dia 0.30 mtr height precast RCC well ring and lowering and placing the same in position in soak pit to proper level and vertically checked with plum bob including cost,conveyance,royality of all materials including all labour & T&P charges etc complete as per the direction of the engineer-in-charge. |
| 24 | Plain Cement Concrete of M-20 grade using 20 mm and down size hard crusher broken granite stone chips of approved quality & from approved quarry including lowering, laying the concrete, watering and curing etc. with cost of centering and shuttering for the work etc all complete to required levels laid in layers including cost, conveyance, royalities & taxes of all mateirals & cost of all labour with T & P required for the work etc all complete in all respect as per Direction of the Engineer in charge. (including centering and shuttering). |
| 25 | Providing and laying Factory made Chamfered edge cement concrete coloured Paver Blocks 60mm thick of M30 grade of required strength thickness & size/ shape made by table vibratory laid in required colour and pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of interlocking paver blocks in to the sand bedding layer through vibratory compaction by using plate vibratory, filling joints with fine sand and cutting of Paver Blocks as per required size/ pattern, finishing and sweeping extra sand in foor path, parks, lawns, driver ways or light traffic parking and lanes/ roads etc. all complete as per specification and direction of Engineer-in-charge. |
| 26 | Supplying all materials, labour and T&P and fixing to walls,ceiling and floor PVC pipes conforming to IS.4985 0f [Sch-80],the following nominal diameter including cost of GI fittings and clamps and making good the damages to walls, ceiling & floor including testing as per specification all complete. 25 mm PVC pipe(sch -80) |
| 27 | 15 mm PVC pipe(sch -80) |
| 28 | Supplying all materials,labour and T&P for cutting groves in pucca floor and walls for taking P.V.C. pipes and fittings and making good to the damages all complete as per specification. |
| 29 | Supplying all materials,labour and T&P for cutting holes through existing brick work including making good to the same in cement mortar(1:4) for taking G.I. pipes and fittings /P.V.C. pipes and fittings all complete as per specification. |
| 30 | Supplying all materials,labour and T&P for cutting holes in R.C.C. floors and roofs up to 19 cm. thick including making good and leak proof to the damages for taking G.I. pipes and fittings /P.V.C. pipes and fittings all complete as per specification. |
| 31 | Supplying and fixing sanitary installations, pipes and fittings as per P H specification including cost of all materials, T&P, labour charges etc complete as per specification & direction of Engineer-in-Charge. Fixing wash down water closet(European type) with integral P or S trap. |
| 32 | 600x450 bevel edge mirror |
| 33 | C P towel rail 25mm x 450mm |
| 34 | C P brass soap holder |
| 35 | 15 mm dia brass Bib cock (short body) |
| 36 | 15 mm dia C P brass Bib cock (long body) |
| 37 | 100 mm dia C P round grating |
| 38 | 12 mm dia PVC inlet connection pipe |
| 39 | P V C low level cistern -10 lts cap. |
| 40 | PVC water storage tank (sintex) 1x 1000ltr capacity |
| 41 | 25mm GI Sintex nipple |
| 42 | 25 mm gun metal fullway valbe |
| 43 | Glass shelf |
| 44 | Supply of all materials, labour T&P and fitting, fixing of UPVC SWR soil, waste ventilating pipes and fittings of the following inside diameter of conforming to IS 15392/1992 to walls with nails, bobbings and wooden plugs including jopinting with supply of approved rubber lubricants by means of non heat application method all complete as per specification & direction of Engineer-in-Charge. 110 mm PVC SWR pipe |
| 45 | 110 mm UPVC tee. |
| 46 | 110 mm UPVC door bend. |
| 47 | 110 mm UPVC cowl |
| 48 | 111 mm UPVC floor trap |
| 49 | Recessed wiring to Light point/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of 2M Box with cover Plate-1 No.) Group A 1.2.1-1.24.2 |
| 50 | -do-………Group B 1.2.2 - 1.24.2 |
| 51 | -do-………. Group C 1.2.3 - 1.24.2 |
| 52 | Recessed wiring to Fan point in Group B 1.2.2 - 1.24.2 |
| 53 | Supply and Fixing of 4M GI box on surface or in recess with suitable size of Modular base cover in front including providing and fixing 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required (Separate) (1.25.1+1.25.4) |
| 54 | Supply and Fixing of 5/6 Modular Switch & 3pin 5/6A Modular Socket on existing board (Existing) (1.25.1+1.25.4) |
| 55 | Supply and Fixing to 16/18 SWG Modular GI box of following sizes (normal sixe) in recess with suitable size of Modular Base & Cover in front including cutting the wall and making good the same in case of recessed conduit as required.for 2 Module (1.24.1) |
| 56 | ..do 4 Module |
| 57 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Finolex/L&T/Anchor/Havels/V-Guard). 2x1.5 sqmm + 1 x 1.0 sqmm( 1 .8) |
| 58 | do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 59 | do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3) |
| 60 | do- 4x6sqmm +2x2.5sqmm (1.8.10) |
| 61 | Supply, Installation, Testing, and Commissioning of 63 Amp TPN Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge.Make-SEIMENS/HPL/ANCHOR/L&T/HAVELS/C & S/ RK (2.15.3) |
| 62 | Supply and Fixing of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 63 | Supply and Fixing of batten holder BK angle holder ISI marked including connection etc. instead of ceiling rose(1.29- 1.28) |
| 64 | Supply and Fixing of 15W LED Bulb |
| 65 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick including accessories and providing masonary with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.(3.5+3.6) |
| 66 | Supply andlaying 8 SWG copper wire in recess for loop earthing as required (3.18) |
| 67 | Supply, Installation, Testing and commissionioning of 225mm sweep exhaust fan in the existing opening, including making the hole to suit the size of the above fan making good the damaged comlete, connection,etc. as required.(1.43)(Make: Bajaj/Almonard) |
| 68 | S/F of 1.5sqmm mult-strand copper wire for invertor wiring |
| 69 | S/F of 6 pin 15/16A Modular socket (1.25.5) |
| 70 | S/F of 32A DP Modular Switch with Neon Indicator (Heavy Duty) |
| 71 | Supplying, fitting and fixing granite stone of 25mm thick including writing letter as directed by the department. |
| 72 | Provision of photographs at different stage of execution of the work. Please Enable Macros to View BoQ information |
