|
| 1 | Submersible pump and Handpup repairing with labours etc. |
| 2 | Dismentling existing handpump and ressembling after workdone |
| 3 | Repalcement of Handpump Chain |
| 4 | Supplying and erecting ISI mark G.I.Pipe 32 mm dia.B Class at position with accessories.As per specification No.CW |
| 5 | Providing and fitting new metal rod in handpump |
| 6 | Providing and fitting new cylinder in hadpump |
| 7 | Nominal Repairing of handpump |
| 8 | Providing and fitting new nut bolt in handpump |
| 9 | Providing and fitting new bearing in handpump |
| 10 | Providing and fitting new pin in handpump |
| 11 | Providing and fitting 1000 liter new water tank |
| 12 | Replacement of 3/4\\" GI pipe in handpump |
| 13 | Dismaintiling the existing submersible pump with PVC pipeline |
| 14 | Dismantling the existing submersible pump with Gi |
| 15 | Rewinding of submersible pump motor in borewell of all types and makes upto and including 5 hp upto 25 h p with coated copper wires & overhauling with coated copper wires & overhauling with minor repairs, lubricating of ball earings & bush bearing, and replacing screws etc. testing for the original speed, hp and no load consumption & guarantee. |
| 16 | Rewinding of submersible pump motor in borewell of all types and makes upto and including 5 hp with coated copper wires & overhauling with coated 5.00 copper wires & overhauling with minor repairs, lubricating of ball earings & bush bearing, and replacing screws etc. testing for the original speed, hp and no load consumption & guarantee. |
| 17 | Replacing the existing bearing of approved make for electric motor ac single 16.00 phase3 phase upto hp of all types with due alignment of the shaft and tested |
| 18 | Replacing the existing bearing of approved make for electric motor a.c 3 phase 3 phase upto 2 hp to 3 hp of all types with due alignment of the shaft and tested |
| 19 | replacing the existing bearing of approved make for electric motor 5 hp & 7.5 hp of all types with due alignment of the shaft and tested |
| 20 | replacing the existing bearing of approved make for electric motor 10 hp and 12.5 hp of all types with due alignment of the shaft and tested |
| 21 | replacing the existing bearing of approved make for electric motor 15 hp & 20 hp of all types with due alignment of the shaft and tested |
| 22 | replacing the existing ampere of approved make for electric motor of all types with due alignment of the shaft and tested |
| 23 | replacing the existing bushing of approved make for electric motor of all types with due alignment of the shaft and tested |
| 24 | replacing the existing sleeve of approved make for electric motor of all types with due alignment of the shaft and tested |
| 25 | Lethwork |
| 26 | replacing the existing PVC pipe of motor |
| 27 | replacing the existing GI pipe of motor |
| 28 | supplying and erecting flat flexible 3 core 1.5 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intrvals with column pipe assembly |
| 29 | supplying and erecting flat flexible 3 core 2.5 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intrvals with column pipe assembly |
| 30 | supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intrvals with column pipe assembly |
| 31 | supplying and erecting flat flexible 3 core 6 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intrvals with column pipe assembly |
| 32 | supplying and erecting flat flexible 3 core 10 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intrvals with column pipe assembly. |
| 33 | supplying and erecting pump protection realay comprising current sensing phase failure and uv+ov relay with dry run and overload protection suitable for 3 phase pumps (silmailar to |
| 34 | supplying and erecting no-volt-coll similar to L&T make for motor having DOL starters of MU-1 Type upto 5 H.P |
| 35 | Supplying and erecting no-volt-coil similar to L&T makefor motor having DOL starters of MU-1 Type From 7.5 H.p |
| 36 | Replacing relay of starter |
| 37 | nominal reparing of borewell like door, clamp top and bottom pleces ets |
| 38 | supplying and erecting D.O.L Starter suitable for 250V Single phase, 50 cycle with overload element with necessary materials and connected to supply upto 7.5 hp |
| 39 | supplying and erecting D.O.L Starter suitable for 400v 3 phase, 50 cycle with no volt coil and overload element with necessary materials and connected to supply upto 7.5 hp |
| 40 | supplying and erecting D.O.L Starter 400v 3 phase, 50 cycle with no volt coil and overload element with necessary materials and connected to supply for 10 hp |
| 41 | replacing 63 amp Cutout |
| 42 | rewinding of monblock motor of all types and makes above 0.5 hp upto 10 hp with coated copper wires & overhauling with minor repairs, lubricating of ball bearings & Bush bearing and replacing screws etc testing speed. h.p and no |
| 43 | servicing of monoblock pump |
| 44 | handpumup set india mark II (including 12 nos of pipe calls and 12 nos of connecting rod cylinder and stand assemblyb etc as per rate appoved by zp |
| 45 | india mark ii handpump fitting & installation charges ets complete as directed by |
| 46 | supplying and ereting submersible pumpset of 0.75 hp with 415 v, 50 c/s supply suitable for 150 mm din Borewell |
| 47 | supplying and ereting submersible pumpset of 1 hp with 415 v. 50 c/s ac supply suitable for 150 mm din Borewell |
| 48 | supplying and ereting submersible pumpset of 5 hp with 415 v. 50 c/s ac supply suitable for 150 mm din Borewell |
| 49 | supplying and ereting submersible pumpset of 7.5 hp with 415 v, 50 c/s ac supply suitable for 150 mm din Borewell |
| 50 | supplying and ereting submersible pumpset of 10 hp with 415 v. 50 c/s ac supply suitable for 150 mm din Borewell |
| 51 | supplying and ereting submersible pumpset of 15hp with 415 v, 50 cls ac supply suitable for 150 mm din Borewell |
| 52 | supplying and ereting submersible pumpset of 30 hp with 415 v, 50 c/s ac supply suitable for 150 mm din Borewell |
| 53 | supplying & ereting centrifugal water pump (monoblock), 230v. single phase 52.00 50 cycles a.c supply of 0.5Hp of specifled discharge head & size of suction, delivery pipes on provided c c foundation as per |
| 54 | supplying & ereting centrifugal water pump (monoblock), 230v, single phase 50 cycles a.c supply of 1Hp of specifled discharge head & size of suction, delivery pipes on provided c.c foundation as per |
| 55 | supplying & ereting centrifugal water pump (monoblock), 230v, single phase 54.00 50 cycles a.c supply of 1.5Hp of specifled discharge head & size of suction, delivery pipes on provided c.c foundation as per |
| 56 | supplying & ereting centrifugal water pump (monoblock), 415v, three phase 50 cycles a.c. supply of 2Hp of specified discharge 2.2/4.1 Liters per second (LPS) for head of size 8/26m and provided c.c foundation as per 50mm suction/40mm, delivery pipes on provided c.c foundation as per |
| 57 | supplying & ereting centrifugal water pump (monoblock), 415v, three phase 50 cycles a.c supply of 3Hp of specifled discharge 2/4.1 Liters per second (LPS) for head of size 14/36m and 50mm suction/40mm, delivery pipes on provided c.c foundation as per |
| 58 | supplying & ereting centrifugal water pump (monoblock), 415v, three phase 50 cycles a.c. supply of 5Hp of specifled discharge 2/4.1 Liters per second (LPS) for head of size 36/52m and 50mm suction/40mm, delivery pipes on provided c.c foundstion as per |
| 59 | supplying & ereting centrifugal water pump (monoblock). 415v, three phase 50 cycles a.c. supply of 7 5Hp of specified discharge 4.5/8.6 Liters per second (LPS) for head of size 36/52m and 65mm suction/50mm, delivery pipes of size with discharge 11 1/19.9 liters per second (LPS) for head of 16/30m and 80mm suction/65mm delivery pipe size on provided c.c foundstion as per |
| 60 | supplying & ereting centrifugal water pump (monoblock), 415v. three phase 50 cycles a.c. supply of 10Hp of specifled discharge 9.6/21.6 Liters per second (LPS) for head of size 18/40m and 80mm suction/65mm. delivery 59.00 pipes of size or with discharge 4.3/7.8 liters per second (LPS) for head of 40/64m and 65mm suction/50mm delivery pipe size on provided c.c foundstion as per Please Enable Macros to View BoQ information |
