|
| 1 | Clearing jungle including up rooting of rank vegetation grass bush wood trees and sapling of girth upto 30 cm. measured at a height of 1 m above ground level & removal of rubbish upto a distance of 50 mt. outside theperiphery of the area cleared. (if however only grass is met with the area will be measured and paid for under item 4001). |
| 2 | Surface dressing of ground including removing vegetation in equalities not exceeding 15 cm deep anddisposal of rubbish lead upto 50 m and lift upto 1.5 m.;Ordinary soil |
| 3 | Dismantling G.I. sheets roofing including ridges hips valleys and gutters etc. and stacking the material within 50 meters lead. |
| 4 | Dismantling steelwork in built up sections in angles tees flats and channels including all gusset plates bolts nuts cutting dismembering and staking within 50 mts. Lead |
| 5 | Demolishing laterite stone masonry in cement mortarincluding stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. |
| 6 | Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead. |
| 7 | Earthwork in excavation by mechanical means (hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading danger lighting guarding as directed in :; All kinds of soil |
| 8 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 9 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40m nominal size) excluding cost of centering shuttering and finishing :;All worksupto plinth level |
| 10 | Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in cm. 1 : 5 (1 cement : 5 coarsesand) in foundation upto plinth level |
| 11 | Extra for laterite masonry in all sizes in superstructure from floor Ilevel upto floor V level. |
| 12 | Pointing on stone work with cement mortar 1: 3 (1 cement: 3 fine sand); Flush pointing |
| 13 | Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.;String courses copings bedplates anchor blocks plain window sills and the like. |
| 14 | Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.;Small lintels not exceeding 1.5 m clear span including coping and the like requiring form work to the suspended portions. |
| 15 | Centering & shuttering including Strutting Propping & removal of forms for :;Suspended floors roofs landings shelves & their supports |
| 16 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering shuttering finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size);In beams suspended floors roofs having slope upto 15° landings balconies shelves chajjas lintels bands plain window sills staircases upto floor five level |
| 17 | Providing TMT steel reinforcement bars of(SAIL TATA. VIZAG JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 18 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 19 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1cement : 3 coarse sand) finished with sponge. |
| 20 | Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead.;With cement mortar 1:4 (1 cement : 4fine sand) |
| 21 | Providing and and laying vitrified floor tiles in different sizes of Johnson Somany Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc. complete;600 x 600 mm light Shades |
| 22 | Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622 of approved make in all colours & shade in skirting riser of steps and dados jointing with grey cement slurry @3.3 kg per sqm including point ing/grouting in white cement mixed with pigment of matching shade complete.;600 x 600 mm -light Shades |
| 23 | Providing and applying white cement based putty of average thickness 1.00 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. |
| 24 | Removing white or colour wash by scrapping sand mpapering and preparing surface smooth including necessary repairs to scratches etc. complete. |
| 25 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 26 | Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. |
| 27 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 28 | Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws.; Plain grill |
| 29 | Providing and fixing anodised aluminium shutters in accordance with the specification annexed herewith including transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18 mm series shutters section.;Plain glass |
| 30 | Providing and fixing anodised aluminium shutters in accordance with the specification annexed herewith including transportation, scaffolding and handling etc. complete as per direction of the Engineer-in -charge: Single or double leaf door shutters.;Plain plate glass |
| 31 | Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section |
| 32 | Providing and fixing ASTM UPVC pipe conforming to ASTM 2467 with ISO 14001 including all UPVC plain & brass threaded fittings including jointing of pipes & fittings with one step UPVC solvent cement trenching refilling & testing of joints complete as per direction of Engineer. External work.;SCH-80(blue)/(white);25mm outer dia. |
| 33 | Providing and fixing ASTM UPVC pipe conforming to ASTM 2467 with ISO 14001 including all UPVC plain & brass threaded fittings including jointing of pipes & fittings with one step UPVC solvent cement trenchingrefilling & testing of joints complete as per direction of Engineer. External work.; SCH-80(blue)/(white);50mm outer dia. |
| 34 | Providing and fixing brass bib cock (heavy) of approved quality :;25 mm nominal bore . |
| 35 | Providing woodwork in frames of doors windows clerestory windows trusses & other frames wrought framed and fixed in positon.;Second class Indian teak wood |
| 36 | Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors windows and clerestory window including anodized aluminium butt hinges with necessary screws:; Second class Indian teak wood |
| 37 | Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts nuts and wooden plugs and embeded in cement concrete block 30 x10 x 15 cm 1:3:6 mix (1cement: 3 coarse sand: 6stone aggregate 20 mm nominal size.;40 x 3 mm flat iron hold fast 15 cm long |
| 38 | Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. complete;200 x 10 mm |
| 39 | Providing and fixing bright finished brass handles withnecessary screws etc complete;125 mm |
| 40 | Providing and fixing bright finished brass door latch with necessary screws etc complete;250 x 16 x 5 mm |
| 41 | Providing and fixing 150 mm. bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete. |
| 42 | Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete. |
| 43 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for wood work of approved brand & manufacture in all shades on new work to give an even shade. |
| 44 | Steel work in built up tubular (round square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL TATA. VIZAG JSW APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. |
| 45 | Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins rafters trusses flashings etc. complete as per the directions of the Engineer in charge. |
| 46 | Add for providing & fixing Flashings -[Corners Ridges valleys gable end & Trims](Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge. |
| 47 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. Please Enable Macros to View BoQ information |
