|
| 1 | Providing and fixing of 2 mm thick PVC/Rubber tiles flooring, plain, coloured, morbed or mosaic or mattled finish, laid with approved brand adhesive on sub floor damp proofing treatment (to be measured separately) for payment complete in all respect as per satisfaction of Engineer-in-charge.( LG/ Tuskar/ Wonderfloor make) |
| 2 | Providing, stiching and fixing Evabella curtain cloth 100% polyester having a weight of 349 gm/ linear mtr and width 140 cm alongwith rings and allied accessories etc. complete in all respect as per satisfaction of Engineer-in-Charge. (KC /Excel/Sarom/D Decor fabric make) Five year warranty will be given after completion of work. |
| 3 | Providing and fixing of 25 mm dia stainless steel Grade 202 curtain rod having wall thickness 1.4 mm with two wall to wall ( 30 gram) or wall ( 90 gram) brackets fixed with SS screw and rawl plug as required etc. complete in all respect as per satisfaction of Engineer-in-Charge. |
| 4 | Providing and fixing Stainless steel Grade- 202 wall to wall (30 gram)/ wall (90 gram) brackets with SS screw to fix the rawl plug as required etc. complete in all respect as per satisfaction of Engineer-in-Charge. |
| 5 | Providing and fixing Stainless steel Grade 202 Finala (60 gram) to protect the side hole of the curtain rod etc. complete in all respect as per satisfaction of Engineer-in-Charge. |
| 6 | Supplying and Installation of Conference table having a size of 1350 mm into 600 mm into 740 mm made of top shall be 25 mm PLB thick With PVC beading all over. In Understructure legs shall be made from 18 mm thick PLT having curved profile plus Modesty shall be made from PLT (pre - laminated twin) boards 18 mm thick in two shades. Wire manager shall be running along the width of desk fitted on the modesty panel from inside etc. as required complete in all respect as per satisfaction of Engineer-in-Charge ( Godrej/ Steel case/ Rock worth/ Space wood/ make ) . OEM certificate and two years Warranty certificate will be given after completion of work |
| 7 | Supplying and Installation of Conference table having a size of 2350 mm into 850 mm into 740 mm made of top shall be 25 mm PLB thick With PVC beading all over. In Understructure legs shall be made from 18 mm thick PLT having curved profile plus Modesty shall be made from PLT (pre - laminated twin) boards 18 mm thick in two shades. Wire manager shall be running along the width of desk fitted on the modesty panel from inside etc. as required complete in all respect as per satisfaction of Engineer-in-Charge ( Godrej/ Steel case/ Rock worth/ Waldner make ) OEM certificate and two years Warranty certificate will be given after completion of work |
| 8 | Supplying and Installation Revolving Executive Chair cushion fabric (LC) full back seat and back assembly made of cushioned seat assambly consists of seat base moulded in glass- filled Ploy- amide, moulded polyurethane foam& upholstered witj high stretch knitted polyester fabric. The Cushioned back assembly consists of back inner moulded in polypropylene in situ moulded with polyurethane foam & upholstered with high stretch knitted polyester fabric. The HR polyurethane foam used in seat and back cushion is moulded in density 45_+2 kg/m3 and hardness load 16+_2 kgf as per IS: 7888 for 25% compression. The variable tilt angle recline motion can be adjust with 3 position Tilt Limit feature which is inbuilt in seat base and the return force is user weight dependent. Seat Size: 53.5 cm(W) x 51.0 cm(D) Full Back Size:- 51.5 cm(W) x 82.0 cm(H) etc. as required complete in all respect as per satisfaction of Engineer-in-charge ( Godrej/ Steel case/ Rock worth/ Waldner make). OEM certificate and two years Warranty certificate will be given after completion of work |
| 9 | Supplying and Installation Revolving Chair cushion fabric full back seat and back assembly made of cushioned seat assambly consists of seat base moulded in glass- filled Ploy- amide, moulded polyurethane foam& upholstered witj high stretch knitted polyester fabric. The Cushioned back assembly consists of back inner moulded in polypropylene in situ moulded with polyurethane foam & upholstered with high stretch knitted polyester fabric. The HR polyurethane foam used in seat and back cushion is moulded in density 45_+2 kg/m3 and hardness load 16+_2 kgf as per IS: 7888 for 25% compression. The variable tilt angle recline motion can be adjust with 3 position Tilt Limit feature which is inbuilt in seat base and the return force is user weight dependent. Seat Size: 48.5 cm(W) x 47.0 cm(D) Full Back Size:- 45.5 cm(W) x 53.0 cm(H) etc. as required complete in all respect as per satisfaction of Engineer-in-charge ( Godrej/ Steel case/ Rock worth/ Waldner make). OEM certificate and two years Warranty certificate will be given after completion of work |
| 10 | Supplying, installation, testing and commissioning Display System 0f following articles i.e 86-Inch Ultra HD Interactive Flat Panel Display with wall mount kit -1 No, Full HD 21-inch Touch Screen display with Dual touch EMR and P-Cap with battery free stylus with 2 control button for chairman - 1No., Mini PC/ OPS PC - i5, 8GB RAM 256 GB SSD with keyboard and mouse – 1 No., Full HD 1080p 60fps PTZ Hybrid Video Conferencing Camera with 12x Optical Zoom, 255 Presets , USB 3.0 Based Video Output with Hand held Remote Control – 1 No., Full HD 1080p 60fps PTZ Hybrid Video Conferencing Camera -with 20x Optical Zoom, 255 Presets , USB 3.0 Based Video Output with Hand held Remote Control – 1 No., Digital Conference Chairmen unit with Table top Gooseneck microphone with LED indication, Built in Speaker, Mute/Unmute Button and priority button to override the delegate microphones – 1 No., Digital Conference Delegate unit with Table top Gooseneck microphone with LED indication, Built in Speaker, Mute/Unmute Button – 16 Nos., Digital Conference Control unit with Camera control functionality to enable PTZ camera for Voice tracking Functionality – 1 No., 250-Watt Audio Amplifier – 1 No., 50-Watt Wall Mount Speaker – 4 Nos., Ultra HD HDMI Splitter with 1 HDMI Input and 4 HDMI Output – 1 No. , Full HD HDMI Extender over cat-6 Tx-Rx Set upto 50 meter range – 1 No., USB Extender over cat-6 Tx-Rx Set upto 50 meter range- 1 No., 6U wall mount Rack – 1 No.and required cables and accessories i.e Ultra HD HDMI Cable ,Stereo to 2 RCA Cable ,, Cat 6 Ethernet Cable etc. complete in all respect as per satisfaction of Engineer-in-Charge (Godrej/ Globus/ brio make). The detail specification is also appended. OEM certificate and two years Warranty certificate will be given after completion of work |
| 11 | Providing and installation of Front & Rear portion class room desk-cum-bench three seater having a size of 1690mmW into 1095mmD into707mmH. All panels shall be made from 18mm thick pre-laminated twin board with PVC edge bandage on all sides. The panels have corners rounded for safety usage. All side metal frames and cross connectors shall be made from combinations of 25.4x1.2mm thick round ERW tubes 31.8x1.2mm thick round ERW tubes and 28.6x1.2mm thick round ERW tubes which are welded together. The welded structures and cross connectors shall be coated with min. 45 micron thickness of epoxy polyester coating. Back supports which shall be provided at the rear back shall be made of 50.8 x 25.4 x 1.2mm thick rectangular ERW tubes. The tubes shall be coated with min. 45 microns of epoxy polyester coating. The storage shelves shall be made from 0.6mm thick MS sheet fixed below the desk top panel and are coated with min. 45 micron of epoxy polyester coating. Hooks shall be provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They shall be made from 2mm thick MS sheet and are coated with min. 45 micron thickness of epoxy polyester coating. The understructure is assembled using M6 trilobular screws with Zn blue plating. Spacers shall be provided on the top of round tubes for wooden panels fixing. They shall be made of PP Glass filled (30%). Plastic caps made of PP copolymer (3530 Grade) are also provided on the rear frames adding more aesthetic value to the product, M6 high tensile TVS make bolt with glass filled nylon level adjustors shall be provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx. 15mm complete in all respect as per satisfaction of Engineer-in-charge. ( Godrej/ Steel case/ Rock worth/ Waldner make). OEM certificate and two years Warranty certificate will be given after completion of work. |
| 12 | Providing and installation of middle portion class room desk-cum-bench three seater having a size of 1690mmW into 895mmD into707mmH. All panels shall be made from 18mm thick pre-laminated twin board with PVC edge bandage on all sides. The panels have corners rounded for safety usage. All side metal frames and cross connectors shall be made from combinations of 25.4x1.2mm thick round ERW tubes 31.8x1.2mm thick round ERW tubes and 28.6x1.2mm thick round ERW tubes which are welded together. The welded structures and cross connectors shall be coated with min. 45 micron thickness of epoxy polyester coating. Back supports which shall be provided at the rear back shall be made of 50.8 x 25.4 x 1.2mm thick rectangular ERW tubes.. The tubes shall be coated with min. 45 microns of epoxy polyester coating. The storage shelves shall be made from 0.6mm thick MS sheet fixed below the desk top panel and are coated with min. 45 micron of epoxy polyester coating. Hooks shall be provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They shall be made from 2mm thick MS sheet and are coated with min. 45 micron thickness of epoxy polyester coating. The understructure is assembled using M6 trilobular screws with Zn blue plating. Spacers shall be provided on the top of round tubes for wooden panels fixing. They shall be made of PP Glass filled (30%). Plastic caps made of PP copolymer (3530 Grade) are also provided on the rear frames adding more aesthetic value to the product, M6 high tensile TVS make bolt with glass filled nylon level adjustors. shall be provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx. 15mm complete in all respect as per satisfaction of Engineer-in-charge( Godrej/ Steel case/ Rock worth/ Waldner make). OEM certificate and two years Warranty certificate will be given after completion of work |
| 13 | Providing and installation of Front & Rear portion class room desk-cum-bench two seater having a size of 1140mmW into1095mmD into 707mmH. All panels shall be made from 18mm thick pre-laminated twin board with PVC edge bandage on all sides. The panels have corners rounded for safety usage. All side metal frames and cross connectors shall be made from combinations of 25.4x1.2mm thick round ERW tubes 31.8x1.2mm thick round ERW tubes and 28.6x1.2mm thick round ERW tubes which are welded together. The welded structures and cross connectors shall be coated with min. 45 micron thickness of epoxy polyester coating. Back supports which shall be provided at the rear back shall be made of 50.8 x 25.4 x 1.2mm thick rectangular ERW tubes. The tubes shall be coated with min. 45 microns of epoxy polyester coating. The storage shelves shall be made from 0.6mm thick MS sheet fixed below the desk top panel and are coated with min. 45 micron of epoxy polyester coating. Hooks shall be provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They shall be made from 2mm thick MS sheet and are coated with min. 45 micron thickness of epoxy polyester coating. The understructure is assembled using M6 trilobular screws with Zn blue plating. Spacers shall be provided on the top of round tubes for wooden panels fixing. They shall be made of PP Glass filled (30%). Plastic caps made of PP copolymer (3530 Grade) are also provided on the rear frames adding more aesthetic value to the product, M6 high tensile TVS make bolt with glass filled nylon level adjustors shall be provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx. 15mm complete in all respect as per satisfaction of Engineer-in-charge ( Godrej/ Steel case/ Rock worth/Waldner/make).The product should be certified by Green Guard,IAQ Gold Green Pro & GRIHA and also OEM certified alongwith two years Warranty certificate will be given after completion of work. |
| 14 | Providing and installation of middle portion class room desk-cum-bench two seater having a size of 1140mmW into 895mmD into 707mmH. All panels shall be made from 18mm thick pre-laminated twin board with PVC edge bandage on all sides. The panels have corners rounded for safety usage. All side metal frames and cross connectors shall be made from combinations of 25.4x1.2mm thick round ERW tubes 31.8x1.2mm thick round ERW tubes and 28.6x1.2mm thick round ERW tubes which are welded together. The welded structures and cross connectors shall be coated with min. 45 micron thickness of epoxy polyester coating. Back supports which shall be provided at the rear back shall be made of 50.8 x 25.4 x 1.2mm thick rectangular ERW tubes. The tubes shall be coated with min. 45 microns of epoxy polyester coating. The storage shelves shall be made from 0.6mm thick MS sheet fixed below the desk top panel and are coated with min. 45 micron of epoxy polyester coating. Hooks shall be provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They shall be made from 2mm thick MS sheet and are coated with min. 45 micron thickness of epoxy polyester coating. The storage shelves shall be made from 0.6mm thick MS sheet fixed below the desk top panel and are coated with min. 45 micron of epoxy polyester coating. Hooks shall be provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They shall be made from 2mm thick MS sheet and are coated with min. 45 micron thickness of epoxy polyester coating. The understructure is assembled using M6 trilobular screws with Zn blue plating. Spacers shall be provided on the top of round tubes for wooden panels fixing. They shall be made of PP Glass filled (30%). Plastic caps made of PP copolymer (3530 Grade) are also provided on the rear frames adding more aesthetic value to the product, M6 high tensile TVS make bolt with glass filled nylon level adjustors shall be provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx. 15mm complete in all respect as per satisfaction of Engineer-in-charge ( Godrej/ Steel case/ Rock worth/ Waldner make).The Product should be certified by Green Guard ,IAQ Gold , Green Pro & Griha and also OEM certificate along with two years warrenty certifiate will be given completion of work. |
| 15 | Supplying and Installation Visitor Chair four legs with arm and castor seat and back assembly made of Seat is injection moulded in glass filled polypropylene compound which is upholstered with fabric upholstery cover and moulded polyurethane foam . The back is injection moulded in glass filled poly propylene compound which is upholstered with Mesh fabric . Seat Size 50cm W 48cm D back Size 53cm W39 cm H etc. as required complete in all respect as per satisfaction of Engineer-in-charge ( Godrej/ Steel case/ Rock worth/ Waldner make). The Product should be certified by Green Guard ,IAQ GOLD ,Green Pro &GRIHA and also OEM certified along with two years warranty certified will begiven after completion of work. |
