|
| 1 | (A) Repairing of Pump Upper & lower Pump body Casing and modification of new base plate Peerless Pump 800GPM, Sl. No. JWSP-08, Konar intake Dismantling of Pump body upper & lower |
| 2 | C.I. Welding electrodes |
| 3 | HT stud new making & casing 16mm x 75mm |
| 4 | Providing Steem jointing kit 16mm for casing |
| 5 | Repairing and modification of new base plate Dismantling of base plate labour cost a) Welder = 01 x 02 shift x 3 days |
| 6 | Dismantling of base plate labour Cost a) Helper = 2 x 2 shift x 03 days |
| 7 | Modification / repairing of base plate labour cost a) Welder = 1 x 2 shift x 03 days |
| 8 | Modification/ repairing of base plate labour cost Helper 2 x 2 Shift x 3 Days |
| 9 | Modification / repairing of base plate labour cost b) Fitter = 01 x 01 shift x 03 days |
| 10 | Grinding Charge |
| 11 | Base plate hole making |
| 12 | Cutting of M S plate 20mm and pipe 6” dia Pipe as per requirement |
| 13 | Welding of M.S. plate 20mm and pipe 6” dia pipe as per requirement |
| 14 | Fitting Charge for Sl. No. 1 to 4 @ 10% |
| 15 | (B) Repairing and overhauling of Peerless Pump, 300GPM,100M Head, Sl. No. JWSP-06, New Filter Plant Impeller C.I. LHS |
| 16 | Impeller C.I. RHS |
| 17 | Shaft sleev bush |
| 18 | Bearing housing |
| 19 | Lantern ring Gun metal |
| 20 | Inter stage bush Gun Metal |
| 21 | Neck ring C.I. |
| 22 | Copuling 10\\" Motor end & Pump end |
| 23 | Steel Shaft EN9 |
| 24 | Fitting Charge for Sl. No. 1.15 to 1.23 @ 10% |
| 25 | (C) Repairing and overhauling of 4UP3 Pump, 380GPM, 40M Head, Sl. No. JWSP-03, New Filter Plant Lantern Ring G M |
| 26 | Impeller C I |
| 27 | Shaft sleeve bush CI |
| 28 | Stoffing Box Bush |
| 29 | Steel Shaft EN9 |
| 30 | Coupling CI 8” motor end & pump end |
| 31 | Check Nut |
| 32 | Steem Jointing 16mm |
| 33 | Body bolt 16mm x 60mm |
| 34 | Fitting Charge for Sl. No. 1.25 to 1.33 @ 10% |
| 35 | (D) Repairing and overhauling of 4UP3 Pump, 380GPM, 40M Head, Sl. No. JWSP-10, New Filter Plant Neck ring C.I. |
| 36 | Bearing housing |
| 37 | Bearing 6306 |
| 38 | Steel Shaft EN9 |
| 39 | Impeller C I |
| 40 | HT stud 16mm x 60mm for body |
| 41 | Gland Split |
| 42 | Chappa (block cover) |
| 43 | Shaft Sleev bush C.I. |
| 44 | Fitting Charge for Sl. No. 1.35 to 1.43 @ 10% |
| 45 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
