|
| 1 | Providing, Installation, Testing and Commissioning of Twin Lobe Air blowers with Induction Motors (1500 Rpm) of Capacity 1105 m3/ H @ 0.6 Kgf/cm2 for Aeration in SBR reactors (2W plus 2S) |
| 2 | Providing, Installation, Testing and Commisiioning of Decanter type Centrifuge Machines with Solids handling Capacity Upto120 Kgs/Hr, able to achieve 20% Consistency in Dried Sludge with 90-95 % Separation Efficiency with Operating Speed of 3000-3200 rpm and 30-35 KW Motor 2 (1W plus 1S). The Centrifuge machines shall be Supplied and Installed with all Accessories from Poly dosing Pumps of appropriate capacity, Outlet solids funnel, with necessary spares such as Intermediate kit Conveyor bearings, main bearings, lubricants , Cables, Panels and all associated works hereto to the Satisfaction of Engineer in Charge: |
| 3 | Supply ,Installation , Testing and Commissioning of EOT Crane for Chlorine Toners with Gantry Rail arrangement of 2 Tonne Capacity , 12m Span, SS-304 Lifting Chain, Length of Chain not less than 12 m, Speed of Hoisting, 3m /Min, Cross Travel 12m wih all Electrical Cables, Panels and Related Works Complete in all respect as Per Specifications of DNIT and Satisfaction of the Engineer in Charge. |
| 4 | HT panel-Design, Providing, Installation, Testing and Commissioning of Indoor type floor Mounted Extendable type, Metal Clad, totally enclosed, 1 Breaker Panel 11 KV, 3 Phase, effectively earthed, short circuit withstand capacity of26.3 KA for three Seconds. Vaccum Circuit breakers , Earthing trolley as per IS: 13118, Panel Board single break, trip free, motorised spring charged with electrical closing arrangement with horizontal draw out and horizontal isolation type VCB with mechanical ON/OFF indicatorand trip device , 4 NO plus 4 NC auxillary contact complete with self contained, fully interlocked, rackrack in and rack out mechanism as per IS 13118, as ammendedupto date specifications, with 800 A Capacity aluminium bus bars and bottom entry gland plate suitable for 3 x 150 sqmm, 11 KV XLPE cable . Cable of Required Size and Length from VCB Panel to Panels of STP is included in Scope of works |
| 5 | Supply, Testing, Jointing, Commissioning of Cables of Required Sizes as per the Estimate attached with in Annexure B |
| 6 | Supply of Safety Equipments- 3 Oxygen Cylinders-3 Kg Portable Type, 8 Safety Belts, 8 Helmets, 8 Set of Safety Shoes, 5 Fire Extinguishers-2Kg Each, Oxidised Saftey Chain-50m, Rope 25 mm 100m, 8 Set of Satey goggles and gloves, Safety Jackets-15, PPE Kit-3 |
| 7 | Supply, Fixing, Erection and Testing of FRP Cable Trays for Cables of various sizes at different locations of STP, Thickness minimum 5mm |
| 8 | Supply , Installation, Testing , commissioning of Ultrasonic Level Sensors/ Flow Meters having measuring range of .1m to 3m with Electrical Panel, MS mounting of 8mm thickness sheet, Epoxy Painted and Calibration with Internet Optical Fibre Connection, Transfer to required websites (HPCB, CPCB, PHED and other mandatory web portals) and all associated works , complete in all respect upto the satisfaction of Engineer in Charge: Ultrasonic Flow meters at Outlet Channel of STP, with Data logger (5 Years O n M data transfer Charges to be Included.) |
| 9 | Supply, Fixing , Testing and Commissioning of CCTV cameras with 2 TB hard Disk, 32 Inches LED Screen, with cables, Electrical works. 1 No CCTV camera of 360 degrees 8 Mega Pixel night vision Installed at Main Gate . 6 No CCTV cameras at SPT, 1 No at MPS, 2 No at SBR Basins, 1 No at Fine Screens and Grit Channels, 1 No at Outlet and CCT, 1 No at Centrifuge with Data transfer to required web Portals with high Speed Internet Optical fibre connection |
| 10 | Supply, Installation, Testing and Commissioning of Electromagnetic Double layered Flow meter suitable for 300mm id, Sewage carrying DI pipe for Rising mains to Inlet Box and transfer of Flow meter data to Required web portals for a Period of 5 Years with dedicated Internet Connection through Optical Fibre Cable and Modem with all electrical cables, panel , with LED display. Data logger , Flanges, Specials, Hodi/ Casing of Flowmeter shall be in scope of Works: |
| 11 | Supply, Installation , Testing and Commissioning of Mechanical Fine Screens in existing Fine Screen Channels with 6 mm Spacing , 2mm bar thickness, MOC of screen mat SS-316 and Automatic Screen Removal Conveyor Belt mechanism with All Electrical Panels, cables, Civil works (1W plus 1S) as Per Specifications and make mentioned in the DNIT for 6 MLD average and 15 MLD Peak Flow. |
| 12 | Supply, Installation, Testing and Commissioning of MCC Panels, One no main Incomer, One DG Set Incomer, 5 No for Raw Sewage lifting Pumps, 4 No for Blowers with VFDs, 4 SD for RAS Pumps, 2 SD Panels for Surplus sludge pumps to Centrifuge, 2 Nos for Centrifuge, 4 Nos Spares or any other panel as per requirement at site conditions and make as per the approved DNIT. |
| 13 | Supplying, erection, testing and commissioning ofsubmersible motor pumping set non clog for sewerage havinghead 15.00 m as per the indicated requirements of dischargesin LPM and power capacity in BHP as per IS marked includingall accessories (like SS304, 8mm thickness guide Pipes, SS304 Chain (Shackle Chain) ,SS Foundation Bolt, completebase frame, Monorail, Chain Guide Line, Auto Compiling,Duct Foot Bend (D/F Bend) etc. complete in all respect( 625m3/ H @ 15 MWC) |
| 14 | -Supply, Installation , Testing and Commissioning ofMechanical Coarse Screens in Newly Constructed CoarseScreen Channels with 20 mm bar(tapered) Spacing, 12mmbar thickness, designed for 50 % Clogging, SS-304 MOC , BarSceens to be of SS-316 MOC and Automatic Screen RemovalConveyor Belt mechanism with All Electrical Panels, cables,Civil works (1W plus 1S) as Per Specifications and makementioned in the DNIT for 6 MLD average and 15 MLD PeakFlow. |
| 15 | -Supply ,Installation , Testing and Commissioning ofEOT Crane for Sumbersible Pumps with Guide Railarrangement of 2 Tonne Capacity , 12m Span, SS-304 LiftingChain, Length of Chain not less than 12 m, Speed of Hoisting,3m /Min, Cross Travel 12m wih all Electrical Cables, Panelsand Related Works Complete in all respect as PerSpecifications of DNIT and Satisfaction of the Engineer inCharge. |
| 16 | -Providing, Installation, Testing and Commissioningof Dissolved Oxygen Meter with 2 Probes , each in SBRAeration Tanks with LED Display , Electrical Panels, Mountingand all related works |
| 17 | Providing, Installation, Testing and Commissioning of Ss-304 Aeration Grid with Silicon Diffusers, 900mm x 62mm, Decating Mechanism, Actuating Valves in Aeration Header, Actuating Gates for SBR , RAS Submersible Sewage sludge Pumps (2 =1W plus 1S), SAS Pumps 2 Nos. (1 in each SBR Basin), RAS line and SCADA with Synchronization to SBR, Raw Sewage Pumps (MPS) and Chlorination, SCADA mechanism as per the Design and Cycle duration from Service(Technology) Provider. Along with Providing, Fixing and Commissioning of Furniture and Computer Equipment as per the deatils attached in the DNIT (1 Head Chair, 10 Revolving Chairs, 2 Tables with minimum size 1.2 m x .75 m , along with Conference hall table of size so as to accommodate 24 people sitting arrangement and 24 Revolving Chairs. Supply, Testing and Commissioning of Computer with LED Display, 13th Generation Intel® Core™ i7 processor Windows 11 Home 68.6 cm (27) diagonal FHD, Antiglare IPS display with Intel® UMA Graphics 16 GB DDR4 RAM 1 TB SSD Solid State Drive HP 710 White Wireless Keyboard and mouse combo, True Vision 1080p FHD IR tilt privacy camera, 1 HDMI-out 1.4) |
| 18 | -Supply, Erection, Installation, Testing andCommissioning of Laboratory Equipment , Chemicals andGlass ware as per Annexure-AChemicals:Cons. Sulfuric Acid2.5Ltr,Manganese Sulfate (MnSO4.H2O) 500gm,Sodiumhydroxide (NaOH) 500g, Sodium Iodide (NaI) 500g, SodiumAzide (NaN3) 500g, Starch 500g, Salicylic Acid 500g, SodiumThiosulfate 500g, Potassium Dichromate ( K2Cr2O7) 500g,Silver sulfate (Ag2SO4) 100g,Ferouss Ammonium sulfate(NH4)2Fe(SO4).6 H2O 500g, Ferroin Indicator 125ml,Filterpapers 1 Pack, Hydrochloric Acid HCL 2.5ltr, Iodine 500g,Potassium Iodide500g, Magnesium Chloride MgCl2.6H2O500gm, Sodium Acetate 500ml, PotassiumNitrate500gm,Acetic Acid 2.5ltr, Methyl orange indicator 125ml Instrumentation: COD Digester with Closed Reflux method,controlled by solid state digital temprature, Indicator cumcontroller (Microprocessor based, Digital pH meter, Turbiditymeter, Spectrophotometer- UV double beam Microprocessorbased, To measure 9 wavelengths and 2 samples at a time,Oven Incubator minimum size 450 mm x 450 mm x 600mm,BOD Incubator- Volume 113 litres minimum with solid stateelectronic digital model, Digital balance- 200 gm weighingcapacity with 0.1 mg accuracy, Muffle Furnace rectangularwith Muffle size (125 mm x 125mm x 250mm), DissolvedOxygen meterwith LCD Display, Binocular Microscope withLED light source, Deep Freezer- Capacity 4 Cu Ft, MagneticStirrer with capacity of hot plate as 5 litres, Double DistillationApparatus - electrically heated, 5 litre capacity, BacteriologicalOrbital Shaking Incubator temperature range from ambient to70 degree celcius, able to accomodate 16 flasks minimum,Biological Safety Cabinet/ sampling Booth- working size-4`x 2`x 2`, Fume Hood- working size 4` x 2` x 2` , Vaccum Pump(Mono block, beltless) moisture trap and vaccum GaugeCapacity -75 litres, Autoclave Vertica- Size 400mm x 600 mmCapacity 98 litresGlass Ware :Desiccator 12’’,1 No, Crucible 50ml,12 Nos,Conical Flask 500 ml 12 nos. Conical Flask 250 ml 12 nos.Measuring cylinder 100 ml 6 nos.Measuring cylinder 50 ml 6nos., Measuring cylinder 10 ml 6 nos.,Volumetric Flask 100 ml6nos., Volumetric Flask 500 ml 6 nos.,Volumetric Flask 250 ml6 nos,Volumetric Flask 100 ml 6 no, Volumetric Flask 50 ml 6nos, Petri diss 4’’, 12 Nos, Burette with stand 500ml, 12 Nos,Micro Pipette 5 ml and 10 ml 6. Nos, Dispenser bottle400ml, 6 Bottles, Distilled water collection bottle 5L(2 Nos),BODBottles, 300 ml-27 Nos, Beaker 10ml,250ml 500ml 1000ml2000 ml (4 Nos Each), Test tube, 1 Box |
| 19 | -supply, installation, testing and commissioning ofonline effluent water quality monitoring system for effluent ph,turbidity, TSS and with LED display data bloger and transfer of Data to required web portal along with optical fiber Data connection for a period of 5 years after 1 year defect liability period. (OMD) |
| 20 | Supply, Installation, Testing and Commissioning of Sluice Gates of Size 0.5 m x 0.5 m with Manual hand Rotated spindle of 500 mmDiameter. The MOC of Sluice gates shall and Spindle shall be SS-304 and Rotating handle shall be made of MS (2 Nos at Upstreamof Fine Screens and 2 Nos at Downstream of Fine Screens ) |
| 21 | Supply, Installation, Testing and Commissioning of Mechanical Detroiter with Agitators and Srew Grit Removal Mechanism in existing Grit Channels (3.5 m x 3.5 m x 1.0 m SWD plus 0.3m FB) auto grit removal mechanism with All Electrical Panels, cables, Civil works as Per Specifications mentioned in the DNIT |
| 22 | Providing and fixing of Odex casing shoe of Proper Size and ISI make complete inall respect |
| 23 | Supplying, erection testing and commissioning of submersible pumping sets as perBIS SPECIFICATION No. 8034 - 1989 (as amended up to date for pumps ) and IS9283 – 1979 (as amended up to date for motor ) the pump motorsets should be capable of pumping clear fresh cold water having characteristics asspecified in Clause – 4 of IS 8034 – 1989 and clause 4.1 of IS 9283 – 1979 . (220LPM /210 M Head 17.50 BHP ) |
| 24 | Providing and Fixing / lowering 7” (180 mm) Dia M. S Pipe of thickness 6.4mm of 6meter. Long ISI make as Required for covering loose formation of soil duringdrilling process including enlarging the existing drilling size at anydepth to cover the loose formation of bore complete in all respect |
| 25 | Drilling of 300 mm dia bore by Bocky/ DTH/Odex for drilling accoring to ISIspecification No. 2800-1991 (Part-1) as amended upto date and modified to extentof the specification attached with this schedule of items of work in all kinds of soils190mm dia bore by DTH/Odex in hard rocky starta includingthe cost of all consumable store, fuel, oil, soil stabilizing material andtransportation of rig and other accessories to the site of proposed bore and backcomplete in the satisfaction of the Engineer-in-charge/ ODEX/DTH |
| 26 | Providing and fixing of 2` i/d delivery pipe class B ISI marked of approved makecomplete in all respect to the satisfaction of Engineer-in-charge |
| 27 | Providing and fixing of cast iron (C.I) D plate of size 300mm dia x 10mm thiknesshaving weight 7 kg to cover the top borehole fastened with nut and bolts and clampplaced on its top for holding the pump set and GI pipes lowered in thetubewell complete in all respect to the satisfaction of Engineer-in-charge. |
| 28 | Providing and fixing of 2` i/d nipple made out G.I pipe class B and welded withflange having holes for fasting with pipe and threaded at other end with 8 threadsin one inch (25mm) complete in all respect to the satisfaction of Engineerin-charge. |
| 29 | Providing and fixing of G.I clamp 50mm wide and 10mm thick suitable for holdingto 50mm G.I pipe class B and pumping machinery complete in all respect to thesatisfaction of Engineer-in-charge. |
| 30 | Resistivity survey with deep penetration, generator opetared, D.C. resistivity meterto kown the type of sub surface starta at different depths. Quantity of water likelyto be available and depth of the tubewell to be installed to obtainfresh water in required quantity including transportation of equipments andmanpower, submission of hard copy of resistivity survey with relevant technicaldate complete in all repect to the satisfaction of Engineer-in-charge |
| 31 | Supplying and jointing 4 core service cable of approved make with bare bunchedaluminium conductor insulator and sheathed with PVC etc. with voltage grade1100 volts marked with IS 694:1990 including cost of jointing, material, carriage,loading and unloading etc. complete in all respect to the satisfaction of Engineer-incharge |
| 32 | Labour for making filter on 219.10 mm dia ERW M.S. Pipe (ISI marked) with slotlength 62.50mm and slot width 0.5mm to 0.75mm around the pipe by gas cutter orany suitable mechanism including cost of all consumable items complete in allrespect to the satisfaction of Engineer-incharge. |
| 33 | -Supply ,Installation , Testing and Commissioning of EOT Crane for centrifuge Machine with Guide Rail arrangement of 2 Tonne Capacity , 12m Span, SS-304 Lifting Chain, Length of Chain not less than 12 m, Speed of Hoisting, 3m /Min, Cross Travel 12m wih all Electrical Cables, Panels and Related Works Complete in all respect as Per Specifications of DNIT and Satisfaction of the Engineer in Charge. |
| 34 | Supplying, erection, testing and commissioning of submersible motor pumping set non clog for Sludge having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP as per IS marked including all accessories (like SS Pipes, SS Chain (Shackle Chain) ,SS Foundation Bolt, complete base frame, Monorail, Chain Guide Line, Auto Compiling, Duct Foot Bend (D/F Bend) etc. complete in all respect (15 m3/H@ 25 MWC) (1W plus 1S) For Centrifuge Sludge feed Pumps |
| 35 | Designing, providing, fixing, commissioning and testing of chlorine gas dosing System with emergency Equipment Accessories and 3 No 900 kg toner of reputed make consisting of support structures, ductwork Neutralization tank, necessary piping, motors, controls, exhaust and essential accessories with dry scrubber and leak detector.. |
| 36 | Credit for Old Blowers, with Motors |
| 37 | Credit for Old Mechanical Coarse Screens |
| 38 | Providing, Installation, Testing and Commissioning of Actuating Gates for SBR Channels of required sizes and Synchronization with SCADA (0.5 m x 0.5m) for Automatic Functioning of Gates as per the SBR Cycle |
| 39 | Operation and maintenance of the complete scope ofwork required to be executed in this DNIT i.eRenovation and Revamping of 6.0 MLD SBR basedSTP at Narnaul including manpower, all chemical,chlorine polymer etc and all electrical, mechanical,horticulture and civil structures for 3 months successfultrail run period, 6 year defect liability cum Operation and Maintenance period thereafter on the commissioning of scheme andplant (cost of the O and M will be kept minimum 20%of estimated cost of work). |
| 40 | HSR Itmes Please Enable Macros to View BoQ information |
