|
| 1 | Excavating trenches of required wdith for pipes cables etc. in/c excavation for sockets and dressing of sides where required, ramming of bottoms depth upto 1500 mm(slope 1 in 200) in/c getting out the excavated soil and bachfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth in/cl. consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil with all required leads as per chapter 2 of CPWD specification and direction of the Eng-in-charge. A. For UPVC pipes in new work a. In all kinds of soil i. For pipes exceeding 90 mm dia but nor exceeding 300 mm dia |
| 2 | Providing and laying different dia rigid UPVC pipes of Working Pressure 4.0 kg/ sq.cm. complete with necessary coupler and solvent cement as per CPWD Specification & direction of Engineer-in-charge. a) 315 mm dia |
| 3 | b) 250 mm dia |
| 4 | c) 200 mm dia |
| 5 | d) 160 mm dia. |
| 6 | e) 140 mm dia |
| 7 | f) 110 mm dia |
| 8 | g) 90 mm dia |
| 9 | Providing and fitting fixing rigid UPVC Reducing socket (one size lower at one end, both end socketted) suitable for pipes of Working pressure 4.0 kg/sq.cm. as per CPWD Specification & direction of Engineer-in-charge. a) 315x250 mm dia |
| 10 | b) 250x200 mm dia |
| 11 | c) 200x160 mm dia |
| 12 | d) 160x140 mm dia |
| 13 | e) 140 x110 mm dia |
| 14 | f) 110x90 mm dia |
| 15 | Providing and fitting fixing of different dia rigid UPVC unequal Tee (including earth cutting & backfilling all socketted) suitable for pipes as per IS specification of working pressure 4.0 kg/sq.cm confirming to IS: 10124 (part-V) as per CPWD Specification & direction of Engineerin-charge. Unequal Tee a) 315x315x250 mm dia |
| 16 | b) 250x250x200 mm dia |
| 17 | c) 160x160x140 mm dia |
| 18 | d) 160x160x110 mm dia |
| 19 | e) 160x160x90 mm dia |
| 20 | f) 140x140x110 mm dia |
| 21 | g) 140x140x90 mm dia |
| 22 | Providing and fitting fixing of different dia rigid UPVC equal Tee (including earth cutting & backfilling all socketted) suitable for pipes as per IS specification of Working pressure 4.0 kg/sq.cm confirming to IS: 10124 (Part-V) as per CPWD Specification & direction of Engineer-in-charge.Equal Tee a) 250x250x250 mm dia |
| 23 | b) 160x160x160 mm dia. |
| 24 | c) 140x140x140 mm dia |
| 25 | d) 110x110x110 mm dia |
| 26 | Providing & fitting fixing rigid UPVC bend(30 degree,45 degree,60 degree, 90 degree) for UPVC pipes as per IS specification of Working pressure 4.0 kg/sq.cm as per CPWD Specification & direction of Engineer-in-charge.a) 200 mm dia |
| 27 | b) 160 mm dia |
| 28 | Providing & fitting fixing MS tail piece with MS flange suitable for pipes complete as per CPWD Specification & direction of Engineer-incharge.a) 125 mm dia PVC Pipe |
| 29 | b) 150 mm dia PVC Pipe |
| 30 | c) 200 mm dia PVC Pipe |
| 31 | Providing and fitting fixing of M.S shore manifold made with 3mm thick MS sheet of size one way 315 mm dia & three way 125 mm dia made with suitable flange(all end) including coating with steel primer (tailpiece if required will be paid separately) including proper alignment with pipe line & earth cutting, backfilling complete as per direction of Engineer-in-charge. |
| 32 | Labour charge for repairing of leakage in existing UPVC distribution system including required earth cutting and fitting fixing of necessary coupler etc. complete and refilling the trench with available excavated earth as per direction of the Engineer-in-charge. (Payment of couplers, tees, reducers etc will be made separately)i) 250 mm dia to 110 mm dia. |
| 33 | Providing and fitting fixing G.I. hydrant suitable for PVC pipes as per standard specification complete as psr direction of the Engineer in charge (Rate excluding the cost of NTP control valve)A) 80x50 mm dia. |
| 34 | Providing and fitting, fixing C.I. sluice valves complete with bolts, nuts, rubber insertions etc.(the tail piece if required will be paid separately) as per chapter 20 of CPWD specication and direction of the Engineer in charge. of approved quality. i) 200 mm dia.B. PN - 1.6 |
| 35 | ii) 150 mm dia.B. PN - 1.6 |
| 36 | iii) 125 mm dia. B. PN - 1.6 |
| 37 | Providing and fitting fixing PVC suction hose pipes of wall thickness 6 mm. as per relevant IS specification and direction of Engineer-in-charge.i) 150 mm dia |
| 38 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete as per direction of Engineer-in-charge.i) 0.63mm thick with zinc coating not less than 275gm/m2 |
| 39 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumenwashers etc. complete as per direction of Engineer-incharge.i) 0.63mm thick with zinc coating not less than 275gm/m2 |
| 40 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : i) Local Teak Wood |
| 41 | Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished / black enamelled M.S butt hinges with necessary screwsexcluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20× 12 mm for fixing panelling and or glazing as per direction of Engineer-In-Charge.i) Local Teak wood .a) 30 mm thick shutters |
| 42 | Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : i) With ready mixed Pink or Grey primer of approved brandand manufacture on wood work ( hard & soft wood ). |
| 43 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : i) New work (two or more coats) including a coat of appropriate steel primer but excluding a coat of mordant solution. |
| 44 | First class brick work in foundation and plinth including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 45 | 12 mm cement plaster of mix: Cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 46 | Neat cement punning. Please Enable Macros to View BoQ information |
