|
| 1 | Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 meters(200 feet) |
| 2 | Dismantling reinforced cement concrete or reinforced brick work including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60M (200feet) |
| 3 | Excavation in soil using hydraulic excavator C.K. 90 and tipper with disposal upto 1000 m :- Excavation for road work in soil with hydraulic excavator of 0.90 cum bucket capacity including cutting and loading tipper triming bottom and side slop in accordance with requirement of lime, grade and cross section and transporting of the embankment loctiong within all lift and lead. as per MoRTH specification No. 301 |
| 4 | Plain Cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregates 40 mm nominal size mechanicaly mixed placed in foundation and compacted by vibrator including curring for 14 days as per MORD specification no. 11.4 |
| 5 | Reinforced Cement Concrete (M-30) cement, coarse sand, and 20 mm gauge Dalla grit complete as per drawing and technical MORD Specification no. 13.1 |
| 6 | Providing and laying cement concrete in wearing course M-35 Grade including reinforcement complete as per drawing and technical specification clause 800,1206.2 of MoRD |
| 7 | Supply fitting and placing HYSD bar reinforcement in super - structure complet as per drawing and techanical specification as per MORD specification No. 13.1 |
| 8 | Providing and laying boulders in apron river bed for protection against scour with stone boulders weighing not less than 40kg each complete as per drawing and techanical specification as per MORD specification no. 14.1 |
| 9 | Back filling with filter media behind abutment wing wall and return wall complete as per drawing and technical specification clause 1204.3.8 of MoRD |
| 10 | Providing 110mm dia PVC pipe weep holes as per direction of E/I. |
| 11 | By Mix in Place Method (for GSB Grading-1 material)Construction of granular sub-base (Grade-1 G.S.B.) by providing well graded material, spreading in uniform layers @1.28 times the specified compacted thicknes with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. |
| 12 | Construction of Embankment with approved material obtain from Borrow pits with all lift and lead, transporting to site ,spreding grading to required slope and compacting to meet requirement of Table-300-2 |
| 13 | Brick soiling with straigth over burnt bricks laid on edge and dry including preparation of sub-grade to required camber, filling joints with local earth spreading blinding coats 1 cm. deep of local earth including |
| 14 | Hume Pipe Culvert Dia 600 mm NP-3 in 3 Row |
| 15 | Construction of Embankment with approved material obtain from Borrow pits with all lift and lead, transporting to site ,spreding grading to required slope and compacting to meet requirement of Table-300-2 |
| 16 | By Mix in Place Method (for GSB Grading-1 material)Construction of granular sub-base (Grade-1 G.S.B.) by providing well graded material, spreading in uniform layers @1.28 times the specified compacted thicknes with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. |
| 17 | W.B.M (Grade-2)Providing, laying, spreading and compacting stone aggregates of specific sizes 45-63mm to water bound macadam (G-2) specification including spreading in uniform thickness i.e. 1.21 times the specified compacted thickness, hand packing, rolling with three wheel 80-100 KN static roller in stages to proper grade and camber, applying and brooming type-B, stone screening material @0.20 Cum per 10 Sqm and Binding material @0.06 cum per 10 sqm to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading-2 as per Technical Specification Clause 405. |
| 18 | W.B.M (Grade-3) Providing, laying, spreading and compacting stone aggregates of specific sizes 53mm to 22.4mm to water bound macadam (G-3) specification including spreading in uniform loose thickness hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, type-B 11.2mm stone screenings @0.18 Cum per 10 Sqm to fill-up the interstices of coarse aggregate, watering and compacting 7.50cm thickness to the required density Grading 3 as per Technical Specification Clause 405. |
| 19 | 7cm wide brick edging on both side of road with first class M-150 bricks laid on edge with mud mortar including labour and supply of brick finished to required tamplate and proper alingment and including dressing ramming the excavated earth as directed by E/I S.I. No. 765 |
| 20 | Construction of Embankment with approved material obtain from Borrow pits with all lift and lead, transporting to site ,spreding grading to required slope and compacting to meet requirement of Table-300-2 lead upto for 1km. (in patri) |
| 21 | Providing and applying prime coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means as per Technical Specification Clause 502. |
| 22 | Providing and applying tack coat with bitumen VG-10 using bitumen distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per Technical Specification Clause 503. |
| 23 | Providing, laying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 (13.2mm & 11.20mm in 2:1) mm aggregates @0.27cum per 10 sqm either using penetration grade bitumen VG-10 @1.46kg per sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508. |
| 24 | Providing and laying seal coat sealing 6.7mm stone grit @0.009 cum per sqm the voids in a bituminous grade VG-10 @0.65kg per sqm surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510. |
| 25 | Suplly and Fixing of Kilometer, Hectometer stone & Informatory Sign Board |
| 26 | W Matel Beam Crash Barier Please Enable Macros to View BoQ information |
