|
| 1 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding : Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. PWD BSR 2022 CH-B-12/ Item 12.40.1 |
| 2 | Wiringof lightpoint/fanpoint/exhaust fanpoint/callbellpointwith 1.5sq.mm nominal size FRPVC insulated unsheathed flexible copper conductor 1.1kVgrade and1.5 sq. mm nominal size FRPVC insulated unsheathed flexible copper earth conductor 1.1kVgrade (IS:694) in recessed ISImarked MMS(IS:9537P- III)virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10AModular switch, Modular face plate with grid plate, 3 pinceil ingrose /Hold er/3 way connector, screws, making connections, testingetc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical /Wiring accessories refer ChapterE-04, E-05 & E- 07 For additional technical parameters of product /work refer Annexure 'A' attached with this BSR Medium point (up to 6 mtr. PWD BSR 2022 CH-E-01/ Item 1.1.2 |
| 3 | S&F following sizes(dia.)of ISI marked virgin material MMS (IS:9537P III )PVC conduit along with ISI marked(IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR : 25 mm PWD BSR 2022 CH-E-01/ Item 1.4.2 |
| 4 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : For area of each slab from 901 to 2000 Sq.Cm : PWD BSR 2022 CH-B-11/ Item 11.18.1 |
| 5 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting outthe excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : Ordinary Rock PWD BSR 2022 CH-B-1/ Item 1.9.1 |
| 6 | Providing and laying in position cement concrete including curing, compaction etc. Complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. PWD BSR 2022 CH-B-3/ Item 3.1.4 |
| 7 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30CM thick wall in: Cement Mortar 1:4 PWD BSR 2022 CH-B-6/ Item 6.1.6 |
| 8 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 4 PWD BSR 2022 CH-B-5/ Item 5.2.1 Wall, Deduction Door, Ventilator |
| 9 | Random rubble dry stone Kharanja under floor. PWD BSR 2022 CH-B-11/ Item 11.26 |
| 10 | Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, with ceiling pointing in cement sand mortar 1 : 3 complete as per specification and instruction of Engineer In Charge PWD BSR 2022 CH-B-10/ Item 10.16 |
| 11 | Providing and fixing 1st quality standard Marble printed/ Granite Shade or Light/dark shad glazed tiles confirming to IS : 13753 & IS :15622 of size 300mm x 600mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). PWD BSR 2022 CH-B-10/ Item 10.16 |
| 12 | Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats:including two coats of anit-corrosive red oxide primer paint PWD BSR 2022 CH-B-9/ Item 9.17 |
| 13 | Windows side hung /Ventilators top or centre hung PWD BSR 2022 CH-B-9/ Item 9.19.3 |
| 14 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. PWD BSR 2022 CH-B-9/ Item 9.26 |
| 15 | Providing and fixing Square bars or other flat welded towindow, ventilatiors etc. PWD BSR 2022 CH-B-9/ Item 9.27 |
| 16 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. PWD BSR 2022 CH-B-9/ Item 9.5 |
| 17 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :25 mm thick. PWD BSR 2022 CH-B-12/ Item 12.2.2 |
| 18 | Finishing with neat cement (punning). PWD BSR 2022 CH-B-12/ Item 12.7 Tank Wall |
| 19 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge PWD BSR 2022 CH-S-2/ Item 2.33.1 |
| 20 | Concealed stop cock 15 mm nominal size PWD BSR 2022 CH-S-2/ Item 2.33.9 |
| 21 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 530x410mm. PWD BSR 2022 CH-S-1/ Item 1.2.1 |
| 22 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity PWD BSR 2022 CH-S-2/ Item 2.26.3 |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 15 mm nominal size PWD BSR 2022 CH-S-2/ Item 2.38.1 |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 25 mm nominal size PWD BSR 2022 CH-S-2/ Item 2.38.3 |
| 25 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M- 15 grade C.C floor & RCC slab covering with M15 grade c.c. floor, 50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 230 x110 x150 cm.(for 20 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10mm ϕ @15 cm c/c bothways including shuttering complete in all respect. PWD BSR 2022 CH-S-3/ Item 3.27.2 |
| 26 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding : Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. PWD BSR 2022 CH-B-12/ Item 12.40.1 |
| 27 | Wiringof lightpoint/fanpoint/exhaust fanpoint/callbellpointwith 1.5sq.mm nominal size FRPVC insulated unsheathed flexible copper conductor 1.1kVgrade and1.5 sq. mm nominal size FRPVC insulated unsheathed flexible copper earth conductor 1.1kVgrade (IS:694) in recessed ISImarked MMS(IS:9537P- III)virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10AModular switch, Modular face plate with grid plate, 3 pinceil ingrose /Hold er/3 way connector, screws, making connections, testingetc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical /Wiring accessories refer ChapterE-04, E-05 & E- 07 For additional technical parameters of product /work refer Annexure 'A' attached with this BSR Medium point (up to 6 mtr. PWD BSR 2022 CH-E-01/ Item 1.1.2 |
| 28 | S&F following sizes(dia.)of ISI marked virgin material MMS (IS:9537P III )PVC conduit along with ISI marked(IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR : 25 mm PWD BSR 2022 CH-E-01/ Item 1.4.2 |
| 29 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : For area of each slab from 901 to 2000 Sq.Cm : PWD BSR 2022 CH-B-11/ Item 11.18.1 |
| 30 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting outthe excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : Ordinary Rock PWD BSR 2022 CH-B-1/ Item 1.9.1 |
| 31 | Providing and laying in position cement concrete including curing, compaction etc. Complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. PWD BSR 2022 CH-B-3/ Item 3.1.4 |
| 32 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30CM thick wall in: Cement Mortar 1:4 PWD BSR 2022 CH-B-6/ Item 6.1.6 |
| 33 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 4 PWD BSR 2022 CH-B-5/ Item 5.2.1 Wall, Deduction Door, Ventilator |
| 34 | Random rubble dry stone Kharanja under floor. PWD BSR 2022 CH-B-11/ Item 11.26 |
| 35 | Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, with ceiling pointing in cement sand mortar 1 : 3 complete as per specification and instruction of Engineer In Charge PWD BSR 2022 CH-B-10/ Item 10.16 |
| 36 | Providing and fixing 1st quality standard Marble printed/ Granite Shade or Light/dark shad glazed tiles confirming to IS : 13753 & IS :15622 of size 300mm x 600mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). PWD BSR 2022 CH-B-10/ Item 10.16 |
| 37 | Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats:including two coats of anit-corrosive red oxide primer paint PWD BSR 2022 CH-B-9/ Item 9.17 |
| 38 | Windows side hung /Ventilators top or centre hung PWD BSR 2022 CH-B-9/ Item 9.19.3 |
| 39 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. PWD BSR 2022 CH-B-9/ Item 9.26 |
| 40 | Providing and fixing Square bars or other flat welded towindow, ventilatiors etc. PWD BSR 2022 CH-B-9/ Item 9.27 |
| 41 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. PWD BSR 2022 CH-B-9/ Item 9.5 |
| 42 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :25 mm thick. PWD BSR 2022 CH-B-12/ Item 12.2.2 |
| 43 | Finishing with neat cement (punning). PWD BSR 2022 CH-B-12/ Item 12.7 Tank Wall |
| 44 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge PWD BSR 2022 CH-S-2/ Item 2.33.1 |
| 45 | Concealed stop cock 15 mm nominal size PWD BSR 2022 CH-S-2/ Item 2.33.9 |
| 46 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 530x410mm. PWD BSR 2022 CH-S-1/ Item 1.2.1 |
| 47 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity PWD BSR 2022 CH-S-2/ Item 2.26.3 |
| 48 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 15 mm nominal size PWD BSR 2022 CH-S-2/ Item 2.38.1 |
| 49 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 25 mm nominal size PWD BSR 2022 CH-S-2/ Item 2.38.3 |
| 50 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M- 15 grade C.C floor & RCC slab covering with M15 grade c.c. floor, 50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 230 x110 x150 cm.(for 20 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10mm ϕ @15 cm c/c bothways including shuttering complete in all respect. PWD BSR 2022 CH-S-3/ Item 3.27.2 |
| 51 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding : Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. PWD BSR 2022 CH-B-12/ Item 12.40.1 |
| 52 | Wiringof lightpoint/fanpoint/exhaust fanpoint/callbellpointwith 1.5sq.mm nominal size FRPVC insulated unsheathed flexible copper conductor 1.1kVgrade and1.5 sq. mm nominal size FRPVC insulated unsheathed flexible copper earth conductor 1.1kVgrade (IS:694) in recessed ISImarked MMS(IS:9537P- III)virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10AModular switch, Modular face plate with grid plate, 3 pinceil ingrose /Hold er/3 way connector, screws, making connections, testingetc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical /Wiring accessories refer ChapterE-04, E-05 & E- 07 For additional technical parameters of product /work refer Annexure 'A' attached with this BSR Medium point (up to 6 mtr. PWD BSR 2022 CH-E-01/ Item 1.1.2 |
| 53 | S&F following sizes(dia.)of ISI marked virgin material MMS (IS:9537P III )PVC conduit along with ISI marked(IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR : 25 mm PWD BSR 2022 CH-E-01/ Item 1.4.2 |
| 54 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : For area of each slab from 901 to 2000 Sq.Cm : PWD BSR 2022 CH-B-11/ Item 11.18.1 |
| 55 | Excavation work by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains not exceeding1.5 m in width or 10 sqm on plan including dressing of sidesand ramming of bottoms lift upto 1.5 m, including getting outthe excavated soil and disposal of surplus excavated soil asdirected with a lead in a 50 meter including stacking of usefulmaterial if available : Ordinary Rock PWD BSR 2022 CH-B-1/ Item 1.9.1 |
| 56 | Providing and laying in position cement concrete including curing, compaction etc. Complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.PWD BSR 2022 CH-B-3/ Item 3.1.4 |
| 57 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30CM thick wall in: Cement Mortar 1:4 PWD BSR 2022 CH-B-6/ Item 6.1.6 |
| 58 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 4 PWD BSR 2022 CH-B-5/ Item 5.2.1 Wall, Deduction Door, Ventilator |
| 59 | Random rubble dry stone Kharanja under floor. PWD BSR 2022 CH-B-11/ Item 11.26 |
| 60 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 610 mm x 510 mm |
| 61 | Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, with ceiling pointing in cement sand mortar 1 : 3 complete as per specification and instruction of Engineer In Charge PWD BSR 2022 CH-B-10/ Item 10.16 |
| 62 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. PWD BSR 2022 CH-B-10/ Item 7.5.1.3 |
| 63 | Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats:including two coats of anit-corrosive red oxide primer paint PWD BSR 2022 CH-B-9/ Item 9.17 |
| 64 | Windows side hung /Ventilators top or centre hung PWD BSR 2022 CH-B-9/ Item 9.19.3 |
| 65 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. PWD BSR 2022 CH-B-9/ Item 9.26 |
| 66 | Providing and fixing Square bars or other flat welded towindow, ventilatiors etc. PWD BSR 2022 CH-B-9/ Item 9.27 |
| 67 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide PWD BSR 2022 CH-B-9/ Item 9.5, For panghat and water tank , For vent |
| 68 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :25 mm thick. PWD BSR 2022 CH-B-12/ Item 12.2.2 |
| 69 | Finishing with neat cement (punning). PWD BSR 2022 CH-B-12/ Item 12.7 Tank Wall |
| 70 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge PWD BSR 2022 CH-S-2/ Item 2.33.1 |
| 71 | Concealed stop cock 15 mm nominal size PWD BSR 2022 CH-S-2/ Item 2.33.9 |
| 72 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 530x410mm. PWD BSR 2022 CH-S-1/ Item 1.2.1 |
| 73 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia PWD BSR 2022 CH-S-2/ Item 3.16.3 |
| 74 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 litres capacity PWD BSR 2022 CH-S-2/ Item 2.26.5 |
| 75 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 15 mm nominal size PWD BSR 2022 CH-S-2/ Item 2.38.1 |
| 76 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 25 mm nominal size PWD BSR 2022 CH-S-2/ Item 2.38.3 |
| 77 | Construction of septic Tank in all types of soil with 40 Cm.thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C floor & RCC slab covering with M15 grade c.c.floor, 50 mm thick stone slab partition walls, 20 mm thickplaster in CM 1:6 finished with neat floating cement, 4 Nosstone foot rests of approved design ,two No. 450 mm dia eachFerro cement cover with frame, earth work etc. complete asper approved drawing including disposal of surplus earthwithin a lead of 50 mtr:- Size 230 x110 x150 cm.(for 20 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10mm ϕ @15 cm c/c bothways including shuttering complete in all respect. PWD BSR 2022 CH-S-3/ Item 3.27.2 |
| 78 | Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe: 200 mm –do- S-4.2.4 |
| 79 | Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work.200 mm Nominal bore of pipe S-4.5.4 |
| 80 | Providing & Laying of Polypropylene rope Confirming to IS:5175 for submersible pump of following sizes. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 16mm (suitable above 50mm & up to 75mm OD pipe) E-21.3.2 |
| 81 | S & F tube well cover of M.S.sheet (6mm thick) with nuts and bolts complete for casing size: 200mm dia S-4.8.4 |
| 82 | S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. E-21.7 |
| 83 | Providing & Fixing of HDPE pipe Confirming to IS:4984:2021 for water supply suitable for submersible & jet pump with required fittings ie socket, elbows, tee etc. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 40 mm OD 6 kg / cm2 11.2.7.1 |
| 84 | SITC of Monoblock motor pump set ISI marked (IS:9079-2002) with TEFC motor, motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011. with Stainless steel Impellor, Stainless steel shaft, Mechanical seal, Single/Three phase ( 240 - 440 V ) permanent split capacitor type (PSC), fitted with thermal overload protection, Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 85 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 50.0 Sq. mm 2 core 21.13.1.1 Please Enable Macros to View BoQ information |
