|
| 1 | Earth work excavation in ordinary soil within initial lead of 50 m and initial lift of 1.5 m including rough dressing and levelling the bed.(per 100 cum) |
| 2 | Supply and filling the F & P with filling dust of approved quality with well watered & rammed including cost, conveyance, royalty & all taxes, etc., complete. |
| 3 | C.C (1:4:8) with 4cm size HG CRUSHER BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C |
| 4 | R.C.C work of M-20 grade with 20mm & down grade BHG C/B chips including hoisting, laying & all cost, conveyance, royalty & taxes etc. comp. to work site as per the specification approved by the deptt. & direction of EIC.( Data for 15 cum) |
| 5 | Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge |
| 6 | Supplying all materials labour for scraping cleaning the road surface applying tack coat using 3.0 kg of bitumen for 10 sqm & laying 75 mm thick built up spray grouting in two layer 37.50 mm thick in each layer using 0.45 cum of 25 mm to 40 mm size HG metal & 12.00 kg penrtration grade bitumen for 10sqm in each layer with 0.12 cum of 12mm size HG chips as key stone for 10sqm spreading over & layng including heating, pouring & spreading over & spreading bitumen, metal and chips & rolling with PRR & all other machinaries including cost, conveyance of all materials. |
| 7 | scarifying the existing roadsurface and disposal of scarified materials,with with all leads and lifts etc.complete |
| 8 | Providing and applying Tackcoat with bitumen emulsion on prepareed surface of granular base including clearing of the road surface and spraying primer @ 0.20 kg / sqm using mechanical means as per cluse 502 of MoSRT & H srecification for road & bridge works. unit -sqm. Taking out put - 3500 sqm |
| 9 | Providing and laying Bitumenious Macadam with hot mix plant using crushed agreegates of specified grading premixed with bituminious binder tramsported to site, laid over a previously prepa-red surface with hydrostatic paver finisher with sensor control to the required grade level & alignment & rollimg with smooth wheeled, vidratory & tendem roller to achive the desire compaction as per clausem-504 of MoRT7H Specification for road & bridge works (4th Resion) |
| 10 | Labour for laying semi-dance bituminous concrete with batch type hot mix plant using crushed agreegate of specific grading, premixed with bituminous binder of 60/70 penetration grade of bitumentransported to site, laid over a previously prepared surface with hydrostastic sensor paver finisher to the required grade, level & allignment rolling with smooth wheel, vibratory & tendem rollers to achive the desired compaction as per clause-508 of MoRTH specification for road & bridge works (4th revision) unit-cum, taking out put-195 cum |
| 11 | Cleaning,lifting and transporting excavated earth by truck with in 5.0Km. Lead including loading and unloading etc.complete |
| 12 | Labour for blinding the sand on road surface with sand including cost, conveyance of materials etc complete |
| 13 | Providing and laying of Hot applied thermo plastic compound 2.5mm thick including reflectorysing glass beads at the rate 250gm per sqm area as per IRC.35 The finished surface to be level,uniform and free from streaks and holes etc.complete as per specification. |
| 14 | Supplying, fitting and fixing of reflective studs at different lines with turning for clear visionat night with all cost..etc all complete. Please Enable Macros to View BoQ information |
