Tender For Construction Of 25Kva S/S, With 11Kv & Lt Line Towards Shifting Of Existing Line & S/S From The Allignment Of The Road For Construction Of Pwd Road From R.D Road To Halia Sahi Road Under Mmsy Scheme At Banki Under R.W. Electrical Section,, Cuttack-Odisha

TDR : 54511940

Tender Notice
BOQ

8 Days Left

Cuttack , Odisha

Tender Brief : Tender For Construction Of 25Kva S/S, With 11Kv & Lt Line Towards Shifting Of Existing Line & S/S From The Allignment Of The Road For Construction Of Pwd Road From R.D Road To Halia Sahi Road Under Mmsy Scheme At Banki Under R.W. Electrical Section,

Document Fees
₹ 6000 /-

EMD
₹ 18593.0 /-

Tender Value
₹ 18.59 Lakhs /-

Submission Date
17-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Part - A (a) :- Construction of 11KV line using 11Mtr long 160X152mm WPB Pole with 100mm2 AAAC = 0.120Km. (From point D to E as shown in the SLD-1) and with 80mm2 AAAC= 0.2Km with installation of 11KV line DP with AB switch arrangement = 01No. (As shown inSLD -2) and erection of 11KV line pole using 11Mtr long 160X152mm WPB Pole =01No towards shifting of existing pole (At point D as shown in SLD-4).1. Cut point with 90 degree angle.WPB (GI) Pole 160x152 (11Mtr. Long, 30.44KG/Mtr.)-DP(Total Pole Weight with Base Plate & Stiffner=334.84 KG+10.74 KG= 345.58 KG)
2	Top Channel(GI) 100X50X6mm, 9.56 KG/Mtr., each Channel(GI) length 2.3 mtr., 2no's Channel(GI) required =( 2x9.56x2.3)
3	Fish Plate(GI) 50x6 mm., 2.36 kg/Mtr., each 0.280 mtr. length, 6 no's required =(6x2.36x0.280)
4	Double Pole Belting Channel(GI) 75X40X4.8mm., 7.14KG/Mtr., each Channel(GI) length 1.66 Mtr., 4 no's Channel(GI) required=( 7.14x1.66x4)
5	50x50x6mm.GI Bracing Angle(GI), 4.5Kg./mtr., each Angle(GI) length 2.671 mtr.,4 nos Angle(GI) required = (4.5x2.671x4)
6	Danger Plate, 2 no's.
7	Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 2 no's = (2x0.59x0.510)
8	H.T. Stay clamp, 50x8 mm. Flat(GI), 3.14Kg/Mtr., 0.551 Mtr. Length, 2 no's qty. required ( 1 Pair)
9	(H.T. Stay set (Complete )
10	H.T. Stay Insulator Type-C
11	7/10 SWG Stay Wire 15kg /stay
12	(Gi Pipe Earthing 40mm. 3 Mtr. Long
13	50x6mm Flat(GI) for earthing, 2.36kg/mtr.,(2.5 mtr. For mesh formation and 2.5 mtr. For raising)= 5x2.36
14	GI barbed wire anticlimbing device 3 Kg. Per support, 2 no's qty. required =(2x3kg)
15	Back Clamp for anticlimbing device 25X3mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 8 no's = (8x0.59x0.510)
16	11 KV pin insulator polymer
17	H W fitting(B&S) 70KN, 3BoIt
18	Disc insulator (B&S) 70 KN polymer
19	WEDGE CONNECTOR FOR 100 SQMM.CONDUCTOR
20	POLYCARBONATE BIRD GUARD
21	GI Nut , Bolt & Washer of different sizes (12.261 Kg each DP without AB Switch)
22	Black Paint(GIS Numbering & Zebra Stripping)
23	Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background
24	Civil & ServicesFixing of complete 11KV line Complete stay set includes1) Turn Buckle Assembly2) Stay Rod & Stay plate3) Stay Insulator4) Stay Wire.5)Stay clamps with Nuts & bolts BA will do the excvation including excvation, supply of 0.SCum cement concrete foundation 1:2:4 size ( 500mmx500mmx800mm) using 20mm BHG metal with all labour and material as per TPCODL Drawing & Standard.
25	Concreting ratio 1:1.5:3(M-20 Grade)(500mmX500mmX1800mm) =0.45Cu.mtr(Per Pole)
26	Couping ratio 1:1.5:3(M-20 Grade) withdimension (500X500X450)= 0.1125 Cu mtr(Per Pole)
27	Provide necessary civil material forconstruction of Earthing chamber, excavation & installation of incuding earthingpipe dia up to 100mm dia for length of 3Mtr.Scope also includes necessary nutbolt, 25 Kg Bentonide Power , connection & welding with incoming earth Flat(GI). The work to be executed as per TPCODL drawing &design
28	2.Cut point with 90 degree angle.WPB (GI) Pole 160 x 152 (11Mtr. long 30.44KG/Mtr.)(Total Pole weight with base plate and shiffner = 334.84 Kg + 10.74 Kg = 345.58 Kg.
29	Straight Cross Arm 100 x 50 x 6 mm 9.56 KG per Mtr. each Channel (GI) length 1.2 Mtr. 4 Nos. Chanel required = (4x9.56 x 1.2)
30	Fish Plate 50 x 6mm, 2.36kg/Mtr. each 0.280 Mtr. length 16Nos. required = (16x2.36 x 0.280)
31	Straight Cross Arm 100 x 50 x 6 mm 9.56 KG per Mtr. each Channel (GI) length 0.306 Mtr. 4 Nos. Chanel required = (4x9.56 x 0.306)
32	Danger Plate 1Nos.
33	Black Clamp for danger plate 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 1No. = (1x 0.59 x 0.510)
34	G.I. Barbed wire / Anticlimbing device (3Kg /support)
35	Black Clamp for anticlimbing device 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 4No. = (4x 0.59 x 0.510)
36	11 KV Pin insulator Polymer.
37	H.W. Fittings (B&S) 70KN 3 bolt
38	Disc insulator (B&S) 70 KN Polymer
39	Earthing of support (Coil type)
40	No.8 G.I. wire(dia 4.6mm) 0.131 KG/Mtr. -2Mtr. for connecting pole with coil earthing.
41	WEDGE CONNECTOR FOR 100 SQMM CONDUCTOR
42	PoLYCARBONATE BIRD GUARD
43	HT Stay Clamp 50x8mm flat, 3.14kg / Mtr., 0.551 Mtr. Length, 2Nos. qty required (1pair)
44	HT Stay set complete
45	HT Stay Insulator-Type C
46	7/10 (SWG) Stay wire 15kg/Stay
47	G.I. nuts, Bolts & washer of different size (3.55Kg each Cut pole)
48	Black paint (GIS Numbering and & Zebra Sripping)
49	Yellow Colour paint (GIS Numbering and & Zebra Sripping) for Background
50	Civil & ServicesFixing of complete 11KV line complete Stay set includes, 1. turn buckle Assembly, 2. Stay Rod & Stay plate, 3. Stay insulator, 4. Stay Wire, 5. Stay clamps with Nuts and bolts BA will do the excvation including excavation, suppy of 0.5 Cum Cement concrete foundaton 1:2:4 size (500mm x500mm x 800mm) using 20mm BHG metal with all labour and material as per TPCODL drawing & Standard
51	Concreting ratio 1:1.5 : 3 (500mm x 500mm x 1800mm) =0.45 Cu. Mtr.
52	Coupping ratio 1:1.5 : 3 with dimension (500mm x 500mm x 450mm) =01125 Cu. Mtr.
53	3. 11 KV Pin Points With WPBWPB (GI) Pole 160 x 152 (11Mtr. long 30.44KG/Mtr.)(Total Pole weight with base plate and shiffner = 334.84 Kg + 10.74 Kg = 345.58 Kg.
54	11KV V Cross Arm GI (10.2 Kg Each)
55	Top bracket 100 x 50 x 6mm GI Channel (GI) (2kg each)
56	Danger Plate 1No. for each pole
57	Black Clamp for danger plate 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 1No. = (1x 0.59 x 0.510)
58	G.I. Barbed wire / Anticlimbing device (3Kg /support)
59	Black Clamp for anticlimbing device 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 4No. = (4x 0.59 x 0.510)
60	11 KV Pin insulator Polymer.
61	Earthing of support (Coil type)
62	No.8 G.I. wire(dia 4.6mm) 0.131 KG/Mtr. -2Mtr. for connecting pole with coil earthing.
63	G.I. nuts, Bolts & washer of different size (1.45Kg/ Pin Point)
64	100 mmsq AAAC
65	80 mmsq AAAC
66	Crimping type Midspan Compression Jointfor 100 sq.mm AAA conductor
67	Crimping type Midspan Compression Jointfor 80 sq.mm AAA conductor
68	Black paint (GIS Numbering and & Zebra Sripping)
69	Yellow Colour paint (GIS Numbering and & Zebra Sripping) for Background
70	PoLYCARBONATE BIRD GUARD
71	Civil & ServiceConcreting ratio 1:1.5 : 3 (500mm x 500mm x 1800mm) =0.45 Cu. Mtr.
72	Coupping ratio 1:1.5 : 3 with dimension (500mm x 500mm x 450mm) =01125 Cu. Mtr.
73	Installation of 25KVA, 11/0.23KV Sing/e pole moonfed S/S =01No.using 11Mtr long 160X152mm WPB Po/e fovrards shifting oF existing S/S (As shown in SLD - 5)WPB (GI) Pole 160 x 152 (11Mtr. long 30.44KG/Mtr.)(Total Pole weight with base plate and shiffner = 334.84 Kg + 10.74 Kg = 345.58 Kg.
74	Top Channel (GI) GI 100 x 50 x 6 mm 9.56 Kg / Mtr., each chanel length (3Mtr. 2Nos. Channel (GI) required (2 x 9.56 x 3)
75	Fish Plate (GI) 50 x 6mm, 2.36kg/Mtr. each 0.280 Mtr. length 6Nos. required = (6x2.36 x 0.280)
76	Transformer mounting bracket (65 x 65 x 6mm) suitable for 16/10KVA 11/0.23 KV Transformer
77	AB Switch mounting Channel (GI) 75 x 40 x 4.8mm GI Chanel (3000mm long) 7.14Kg / Mtr., 2Nos. (Each 2 x 3.0 x 7.14 = 42.84 Kg)
78	Cantilever Support angle 50 x 50 x 6mm GI (1282 mm long) (4.5 Kg / Mtr. 2Nos.) (Each 2 x 1.282x 4.5 = 11.54Kg)
79	HG/DO Fuse mounting Channel (GI) 75 x 40 x 4.8 mm GI channel (2000mm long) 7.14Kg / Mtr., 2Nos. (Each 2 x 2.000 x 7.14 = 28.56 Kg)
80	25x3mm GI flat for earthing, 0.59kg/mtr., (2.5 x 7 Mtr. for mesh formation, 12 Mtr. for LA and 2.5 Mtr. for raising, 11Mtr. for AB switch, 2.8Mtr. for HG Fuse, 5x2 mtr.for DTR and Nutral, (1.3 + 4.5) mtr for DTR Body 0.500 Mtr for LTDB & AB Switch operating handle, 3 Mtr. for Fenching) Each 62.6 x 0.59 =36.93 Kg).
81	LT distribution Box with MCCB, Aluminium Busbar of single bay with kit kat fuse for 25KVA S/S
82	55mmsq All Alloy Aluminum Conductor (AAAC) covered conductor
83	2C x 16mm2 LT XLPE Cable (Armoured)
84	AB switch (11KV 200A 3 Pole 50 Hz)
85	HG Fuse (11KV 200A 3 Pole)
86	WEDGE CONNECTOR FOR 80 SQMM CONDUCTOR
87	PoLYCARBONATE BIRD GUARD
88	Disc insulator (B&S) 70 KN Polymer
89	H.W. Fittings (B&S) 70KN 3 bolt
90	11KV Lightning Arrestor 12KV-10KA (Station Class)
91	11 KV Pin insulator Polymer.
92	HT Stay set complete
93	HT Stay Clamp 50x8mm flat, 3.14kg / Mtr., 0.551 Mtr. Length, 2Nos. qty required (1pair)
94	HT Stay Insulator-Type C
95	7/10 (SWG) Stay wire 15kg/Stay
96	GI pipe earthing 40 mm 3Mtr. Long
97	G.I. nuts, Bolts & washer of different size (3.55Kg each Cut pole)
98	G.I. Barbed wire / Anticlimbing device (3Kg /support)
99	Black Clamp for anticlimbing device 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 8No. = (8x 0.59 x 0.510)
100	Danger Plate 1Nos.
101	Black Clamp for danger plate 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 1No. = (1x 0.59 x 0.510)
102	Name plate
103	Yellow Colour paint (GIS Numbering and & Zebra Sripping) for Background
104	Black paint (GIS Numbering and & Zebra Sripping)
105	Civil & ServiceConcreting ratio 1:1.5 : 3 (500mm x 500mm x 1800mm) =0.45 Cu. Mtr.
106	Coupping ratio 1:1.5 : 3 with dimension (500mm x 500mm x 450mm) =01125 Cu. Mtr.
107	PCC ratio 1:3 :6 (M 10 Grade) for DSS Area (5x3x0.1) = 1.5 Cum (Per pole)
108	Fixing of stay set with 0.5 Cum cement concrete foundation 1:3:6 (M-10 Grade) size (900 x 600 x 900mm) using 40mm BHG metal with all labour and material except stay set, stay wire stay insulator.
109	Construction Earthing chamber including installationof earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earthresistance, including Installation of 3Mtr GI Pipe40mm/50mm including welding of Flat(GI) around pipe .
110	Laying of 2 Cx 16 mm2 LT PVC Cable
111	Supply of AL Lugs suitable for 16 sq mmcable/conductor, Crimping with cable andFixing/connecting include supply and erection of PVC Tape as per voltage requirement.
112	SITC and Erection of GI Fencing with Gate
113	(PART-A (c):- Consfrucfion of LT line Using 9Mtr long 300Kg PSC Pole with 4CX50 + 1CX50 + 1CX16 mm2 ABC -- 1.07Km (34Nos Span) (From poinf B to - C -- 0.12Km as shown in SLD -1 + A to B = 0.45Km as shown in SLD - 3 + A to B (Double Circuit)= 0.2Km as shown in SLD - 4 + C fo D = 0.12Km as shown in SLD - 6) and 2X35+1X25 mm2 ABC = 0.19Km (6NOs Spart) (Proposecf 25KVA DT to existing po/e = 0.07Km. as shown in SLD - 5 + A to B = 0.12Km (as shown in Si.D - 6) with erection of LT pole using 9Mtr long 300Kg PSC po/e = Of/\/o (as shown in SLD -5). (LT Line with PSC Pole)9Mtr. long PSC Pole 300 Kg.
114	LT Stay set complete
115	7/12 (SWG) G.I. Stay wire-Grade-2
116	LT Stay Clamp (1.4 kg / pair)
117	LT Stay Insulator
118	Pole clamp for Eye hook for (XLPE erial bunched cable)
119	Eye hook for (XLPE erial bunched cable 25-70mmsq)
120	Dead end clamp for suitable for messenger XLPE Aerial bunched cable (25-70mmsq)
121	Suspension clamp with EYE hook for ABC
122	4C x50mmsq + 1C x50mmsq + 1C x 16mmsq (Street light) (LT AB Cable)
123	2C x35mmsq + 1C x25mmsq (LT AB Cable)
124	Insulated piercing connector, Type B main 50 to 150mmsq and Tap 50 to 150sqmm.
125	Earthing of support (Coil type)
126	No.8 G.I. wire(dia 4.6mm) 0.131 KG/Mtr. -2Mtr. for connecting pole with coil earthing.
127	Danger Plate LT
128	Black Clamp for danger board plate 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 1No's. = (1x 0.59 x 0.510)
129	G.I. Barbed wire / Anticlimbing device (3Kg /support)
130	Black Clamp for anticlimbing device 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 4No. = (4x 0.59 x 0.510)
131	G.I. nuts, Bolts & washer of different size (3.55Kg each Cut pole)
132	Black paint (GIS Numbering and & Zebra Sripping)
133	Yellow Colour paint (GIS Numbering and & Zebra Sripping) for Background
134	Civil & ServiceFixing of LT complete stay set includes, 1. turn buckle Assembly, 2. Stay Rod & Stay plate, 3. Stay insulator, 4. Stay Wire, 5. Stay clamps with Nuts and bolts BA will do the excvation including excavation, suppy of 0.5 Cum Cement concrete foundaton 1:2:4 size (500mm x500mm x 800mm) using 20mm BHG Metal with all labour and material (Excavation of earth will be done of size 500 x 500 x 1500mm.)
135	Concreting ratio 1:1.5 : 3 (500mm x 500mm x 1500mm) =0.375 Cu. Mtr.
136	(PART-A (d):- Construction of Double Circuit LT line Using 11Mtr long WPB Pole with 4CX501CX501CX16 mm2 ABC 400m(with Double Ckt arrangement) (From point A to-B-02KmX2=0.40Km Km as shown in SLD-4 (LT Line with WPS Pole for double ckt arrangement1. LT AB Cable lineWPB (GI) Pole 160 x 152 (11Mtr. long 30.44KG/Mtr.)(Total Pole weight with base plate and shiffner = 334.84 Kg + 10.74 Kg = 345.58 Kg.
137	LT Stay set complete
138	7/12 (SWG) G.I. Stay wire-Grade-2
139	LT Stay Clamp (1.4 kg / pair)
140	LT Stay Insulator
141	Pole clamp for Eye hook for (XLPE erial bunched cable)
142	Eye hook for (XLPE erial bunched cable 25-70mmsq)
143	Dead end clamp for suitable for messenger XLPE Aerial bunched cable (25-70mmsq)
144	Suspension clamp with EYE hook for ABC
145	4C x50mmsq + 1C x50mmsq + 1C x 16mmsq (Street light) (LT AB Cable)
146	Insulated piercing connector, Type B main 50 to 150mmsq and Tap 50 to 150sqmm.
147	Earthing of support (Coil type)
148	No.8 G.I. wire(dia 4.6mm) 0.131 KG/Mtr. -2Mtr. for connecting pole with coil earthing.
149	Danger Plate LT
150	Black Clamp for danger board plate 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 1No's. = (1x 0.59 x 0.510)
151	G.I. Barbed wire / Anticlimbing device (3Kg /support)
152	Black Clamp for anticlimbing device 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 4No. = (4x 0.59 x 0.510)
153	G.I. nuts, Bolts & washer of different size (3.55Kg each Cut pole)
154	Black paint (GIS Numbering and & Zebra Sripping)
155	Yellow Colour paint (GIS Numbering and & Zebra Sripping) for Background
156	Civil & ServiceFixing of complete 11KV line complete Stay set includes, 1. turn buckle Assembly, 2. Stay Rod & Stay plate, 3. Stay insulator, 4. Stay Wire, 5. Stay clamps with Nuts and bolts BA will do the excvation including excavation, suppy of 0.5 Cum Cement concrete foundaton 1:2:4 size (500mm x500mm x 800mm) using 20mm BHG metal with all labour and material as per TPCODL drawing & Standard
157	Concreting ratio 1:1.5 : 3 (500mm x 500mm x 1800mm) =0.45 Cu. Mtr.
158	Coupping ratio 1:1.5 : 3 with dimension (500mm x 500mm x 450mm) =01125 Cu. Mtr.
159	(PART-A(e):- Line Protection Guarding for Road Crossing Guarding Channel 75x40x4.8 mm, 7.14 KG/Mtr., each channel length 3.5 mtr., 4 no's channel required =( 4x7.14x3.5) ( For Double Pole)
160	No-6 GI wire (0.192 kg/mtr.) for Main String
161	No-8 GI wire (0.131 kg/mtr.) for lacing
162	Eye Bolt (236mm, 16mm dia, 1.577kg/mtr.)
163	Gi Pipe Earthing 40mm. 3 Mtr. Long
164	50x6mm GI Flat for earthing, 2.36kg/mtr., (10.7 mtr For raising)= 10.7x2.36
165	Civil & ServiceConstruction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earthresistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of GI flataround pipe .
166	Part-A (f): Dismantalling materialsDismantling of 9/8 Mtr. PCC/Joist Pole
167	Dismantling/Removal of V Cross arm from pole
168	Dismantling of 11kV Pin Insulator with Pin
169	Dismantling of 11kV Disc Insulator with Hardware
170	Dismantling/Removal of MS Channel. from Double Pole Structure/pole
171	Dismantling of existing 11/0.4kV, 33/0.4KV, Three Phase Distribution Transformer 16KVA including removal of HT/LT leads, earth connections and unloading by crane if required
172	Dismantling of existing 11/0.4kV, 33/0.4KV, Three Phase Distribution Transformer 25KVA including removal of HT/LT leads, earth connections and unloading by crane if required.
173	Re-Installation, Testing and Commissioning of 11/0.4kV, 25kVA Single phase/3-Phase Distribution Transformer on existing structure as per TP Central Orissa Distribution Co. Ltd. specification including loading, unloading, shifting/transportation from site/tent upto 15KM, Testing of Transformer at Site. Scope of work includes jumpering/connection at HT and LT side & Earthing Connections.
174	Dismantling of ACSR/AAAC 34/55mm2 from overhead line
175	Dismantling of varous size of LT AB Cable
176	Dismantling of 11 kV/33KV GO/AB Switch/Isolator/DD fuse/fuse set
177	Dismantling of Lightening Arrester(LA Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Power Generation and Transmission Tenders

Power Transmission Tenders

Overhead Line Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of 25Kva S/S, With 11Kv & Lt Line Towards Shifting Of Existing Line & S/S From The Allignment Of The Road For Construction Of Pwd Road From R.D Road To Halia Sahi Road Under Mmsy Scheme At Banki Under R.W. Electrical Section,, Cuttack-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Part - A (a) :- Construction of 11KV line using 11Mtr long 160X152mm WPB Pole with 100mm2 AAAC = 0.120Km. (From point D to E as shown in the SLD-1) and with 80mm2 AAAC= 0.2Km with installation of 11KV line DP with AB switch arrangement = 01No. (As shown inSLD -2) and erection of 11KV line pole using 11Mtr long 160X152mm WPB Pole =01No towards shifting of existing pole (At point D as shown in SLD-4).1. Cut point with 90 degree angle.WPB (GI) Pole 160x152 (11Mtr. Long, 30.44KG/Mtr.)-DP(Total Pole Weight with Base Plate & Stiffner=334.84 KG+10.74 KG= 345.58 KG)
2	Top Channel(GI) 100X50X6mm, 9.56 KG/Mtr., each Channel(GI) length 2.3 mtr., 2no's Channel(GI) required =( 2x9.56x2.3)
3	Fish Plate(GI) 50x6 mm., 2.36 kg/Mtr., each 0.280 mtr. length, 6 no's required =(6x2.36x0.280)
4	Double Pole Belting Channel(GI) 75X40X4.8mm., 7.14KG/Mtr., each Channel(GI) length 1.66 Mtr., 4 no's Channel(GI) required=( 7.14x1.66x4)
5	50x50x6mm.GI Bracing Angle(GI), 4.5Kg./mtr., each Angle(GI) length 2.671 mtr.,4 nos Angle(GI) required = (4.5x2.671x4)
6	Danger Plate, 2 no's.
7	Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 2 no's = (2x0.59x0.510)
8	H.T. Stay clamp, 50x8 mm. Flat(GI), 3.14Kg/Mtr., 0.551 Mtr. Length, 2 no's qty. required ( 1 Pair)
9	(H.T. Stay set (Complete )
10	H.T. Stay Insulator Type-C
11	7/10 SWG Stay Wire 15kg /stay
12	(Gi Pipe Earthing 40mm. 3 Mtr. Long
13	50x6mm Flat(GI) for earthing, 2.36kg/mtr.,(2.5 mtr. For mesh formation and 2.5 mtr. For raising)= 5x2.36
14	GI barbed wire anticlimbing device 3 Kg. Per support, 2 no's qty. required =(2x3kg)
15	Back Clamp for anticlimbing device 25X3mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 8 no's = (8x0.59x0.510)
16	11 KV pin insulator polymer
17	H W fitting(B&S) 70KN, 3BoIt
18	Disc insulator (B&S) 70 KN polymer
19	WEDGE CONNECTOR FOR 100 SQMM.CONDUCTOR
20	POLYCARBONATE BIRD GUARD
21	GI Nut , Bolt & Washer of different sizes (12.261 Kg each DP without AB Switch)
22	Black Paint(GIS Numbering & Zebra Stripping)
23	Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background
24	Civil & ServicesFixing of complete 11KV line Complete stay set includes1) Turn Buckle Assembly2) Stay Rod & Stay plate3) Stay Insulator4) Stay Wire.5)Stay clamps with Nuts & bolts BA will do the excvation including excvation, supply of 0.SCum cement concrete foundation 1:2:4 size ( 500mmx500mmx800mm) using 20mm BHG metal with all labour and material as per TPCODL Drawing & Standard.
25	Concreting ratio 1:1.5:3(M-20 Grade)(500mmX500mmX1800mm) =0.45Cu.mtr(Per Pole)
26	Couping ratio 1:1.5:3(M-20 Grade) withdimension (500X500X450)= 0.1125 Cu mtr(Per Pole)
27	Provide necessary civil material forconstruction of Earthing chamber, excavation & installation of incuding earthingpipe dia up to 100mm dia for length of 3Mtr.Scope also includes necessary nutbolt, 25 Kg Bentonide Power , connection & welding with incoming earth Flat(GI). The work to be executed as per TPCODL drawing &design
28	2.Cut point with 90 degree angle.WPB (GI) Pole 160 x 152 (11Mtr. long 30.44KG/Mtr.)(Total Pole weight with base plate and shiffner = 334.84 Kg + 10.74 Kg = 345.58 Kg.
29	Straight Cross Arm 100 x 50 x 6 mm 9.56 KG per Mtr. each Channel (GI) length 1.2 Mtr. 4 Nos. Chanel required = (4x9.56 x 1.2)
30	Fish Plate 50 x 6mm, 2.36kg/Mtr. each 0.280 Mtr. length 16Nos. required = (16x2.36 x 0.280)
31	Straight Cross Arm 100 x 50 x 6 mm 9.56 KG per Mtr. each Channel (GI) length 0.306 Mtr. 4 Nos. Chanel required = (4x9.56 x 0.306)
32	Danger Plate 1Nos.
33	Black Clamp for danger plate 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 1No. = (1x 0.59 x 0.510)
34	G.I. Barbed wire / Anticlimbing device (3Kg /support)
35	Black Clamp for anticlimbing device 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 4No. = (4x 0.59 x 0.510)
36	11 KV Pin insulator Polymer.
37	H.W. Fittings (B&S) 70KN 3 bolt
38	Disc insulator (B&S) 70 KN Polymer
39	Earthing of support (Coil type)
40	No.8 G.I. wire(dia 4.6mm) 0.131 KG/Mtr. -2Mtr. for connecting pole with coil earthing.
41	WEDGE CONNECTOR FOR 100 SQMM CONDUCTOR
42	PoLYCARBONATE BIRD GUARD
43	HT Stay Clamp 50x8mm flat, 3.14kg / Mtr., 0.551 Mtr. Length, 2Nos. qty required (1pair)
44	HT Stay set complete
45	HT Stay Insulator-Type C
46	7/10 (SWG) Stay wire 15kg/Stay
47	G.I. nuts, Bolts & washer of different size (3.55Kg each Cut pole)
48	Black paint (GIS Numbering and & Zebra Sripping)
49	Yellow Colour paint (GIS Numbering and & Zebra Sripping) for Background
50	Civil & ServicesFixing of complete 11KV line complete Stay set includes, 1. turn buckle Assembly, 2. Stay Rod & Stay plate, 3. Stay insulator, 4. Stay Wire, 5. Stay clamps with Nuts and bolts BA will do the excvation including excavation, suppy of 0.5 Cum Cement concrete foundaton 1:2:4 size (500mm x500mm x 800mm) using 20mm BHG metal with all labour and material as per TPCODL drawing & Standard
51	Concreting ratio 1:1.5 : 3 (500mm x 500mm x 1800mm) =0.45 Cu. Mtr.
52	Coupping ratio 1:1.5 : 3 with dimension (500mm x 500mm x 450mm) =01125 Cu. Mtr.
53	3. 11 KV Pin Points With WPBWPB (GI) Pole 160 x 152 (11Mtr. long 30.44KG/Mtr.)(Total Pole weight with base plate and shiffner = 334.84 Kg + 10.74 Kg = 345.58 Kg.
54	11KV V Cross Arm GI (10.2 Kg Each)
55	Top bracket 100 x 50 x 6mm GI Channel (GI) (2kg each)
56	Danger Plate 1No. for each pole
57	Black Clamp for danger plate 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 1No. = (1x 0.59 x 0.510)
58	G.I. Barbed wire / Anticlimbing device (3Kg /support)
59	Black Clamp for anticlimbing device 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 4No. = (4x 0.59 x 0.510)
60	11 KV Pin insulator Polymer.
61	Earthing of support (Coil type)
62	No.8 G.I. wire(dia 4.6mm) 0.131 KG/Mtr. -2Mtr. for connecting pole with coil earthing.
63	G.I. nuts, Bolts & washer of different size (1.45Kg/ Pin Point)
64	100 mmsq AAAC
65	80 mmsq AAAC
66	Crimping type Midspan Compression Jointfor 100 sq.mm AAA conductor
67	Crimping type Midspan Compression Jointfor 80 sq.mm AAA conductor
68	Black paint (GIS Numbering and & Zebra Sripping)
69	Yellow Colour paint (GIS Numbering and & Zebra Sripping) for Background
70	PoLYCARBONATE BIRD GUARD
71	Civil & ServiceConcreting ratio 1:1.5 : 3 (500mm x 500mm x 1800mm) =0.45 Cu. Mtr.
72	Coupping ratio 1:1.5 : 3 with dimension (500mm x 500mm x 450mm) =01125 Cu. Mtr.
73	Installation of 25KVA, 11/0.23KV Sing/e pole moonfed S/S =01No.using 11Mtr long 160X152mm WPB Po/e fovrards shifting oF existing S/S (As shown in SLD - 5)WPB (GI) Pole 160 x 152 (11Mtr. long 30.44KG/Mtr.)(Total Pole weight with base plate and shiffner = 334.84 Kg + 10.74 Kg = 345.58 Kg.
74	Top Channel (GI) GI 100 x 50 x 6 mm 9.56 Kg / Mtr., each chanel length (3Mtr. 2Nos. Channel (GI) required (2 x 9.56 x 3)
75	Fish Plate (GI) 50 x 6mm, 2.36kg/Mtr. each 0.280 Mtr. length 6Nos. required = (6x2.36 x 0.280)
76	Transformer mounting bracket (65 x 65 x 6mm) suitable for 16/10KVA 11/0.23 KV Transformer
77	AB Switch mounting Channel (GI) 75 x 40 x 4.8mm GI Chanel (3000mm long) 7.14Kg / Mtr., 2Nos. (Each 2 x 3.0 x 7.14 = 42.84 Kg)
78	Cantilever Support angle 50 x 50 x 6mm GI (1282 mm long) (4.5 Kg / Mtr. 2Nos.) (Each 2 x 1.282x 4.5 = 11.54Kg)
79	HG/DO Fuse mounting Channel (GI) 75 x 40 x 4.8 mm GI channel (2000mm long) 7.14Kg / Mtr., 2Nos. (Each 2 x 2.000 x 7.14 = 28.56 Kg)
80	25x3mm GI flat for earthing, 0.59kg/mtr., (2.5 x 7 Mtr. for mesh formation, 12 Mtr. for LA and 2.5 Mtr. for raising, 11Mtr. for AB switch, 2.8Mtr. for HG Fuse, 5x2 mtr.for DTR and Nutral, (1.3 + 4.5) mtr for DTR Body 0.500 Mtr for LTDB & AB Switch operating handle, 3 Mtr. for Fenching) Each 62.6 x 0.59 =36.93 Kg).
81	LT distribution Box with MCCB, Aluminium Busbar of single bay with kit kat fuse for 25KVA S/S
82	55mmsq All Alloy Aluminum Conductor (AAAC) covered conductor
83	2C x 16mm2 LT XLPE Cable (Armoured)
84	AB switch (11KV 200A 3 Pole 50 Hz)
85	HG Fuse (11KV 200A 3 Pole)
86	WEDGE CONNECTOR FOR 80 SQMM CONDUCTOR
87	PoLYCARBONATE BIRD GUARD
88	Disc insulator (B&S) 70 KN Polymer
89	H.W. Fittings (B&S) 70KN 3 bolt
90	11KV Lightning Arrestor 12KV-10KA (Station Class)
91	11 KV Pin insulator Polymer.
92	HT Stay set complete
93	HT Stay Clamp 50x8mm flat, 3.14kg / Mtr., 0.551 Mtr. Length, 2Nos. qty required (1pair)
94	HT Stay Insulator-Type C
95	7/10 (SWG) Stay wire 15kg/Stay
96	GI pipe earthing 40 mm 3Mtr. Long
97	G.I. nuts, Bolts & washer of different size (3.55Kg each Cut pole)
98	G.I. Barbed wire / Anticlimbing device (3Kg /support)
99	Black Clamp for anticlimbing device 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 8No. = (8x 0.59 x 0.510)
100	Danger Plate 1Nos.
101	Black Clamp for danger plate 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 1No. = (1x 0.59 x 0.510)
102	Name plate
103	Yellow Colour paint (GIS Numbering and & Zebra Sripping) for Background
104	Black paint (GIS Numbering and & Zebra Sripping)
105	Civil & ServiceConcreting ratio 1:1.5 : 3 (500mm x 500mm x 1800mm) =0.45 Cu. Mtr.
106	Coupping ratio 1:1.5 : 3 with dimension (500mm x 500mm x 450mm) =01125 Cu. Mtr.
107	PCC ratio 1:3 :6 (M 10 Grade) for DSS Area (5x3x0.1) = 1.5 Cum (Per pole)
108	Fixing of stay set with 0.5 Cum cement concrete foundation 1:3:6 (M-10 Grade) size (900 x 600 x 900mm) using 40mm BHG metal with all labour and material except stay set, stay wire stay insulator.
109	Construction Earthing chamber including installationof earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earthresistance, including Installation of 3Mtr GI Pipe40mm/50mm including welding of Flat(GI) around pipe .
110	Laying of 2 Cx 16 mm2 LT PVC Cable
111	Supply of AL Lugs suitable for 16 sq mmcable/conductor, Crimping with cable andFixing/connecting include supply and erection of PVC Tape as per voltage requirement.
112	SITC and Erection of GI Fencing with Gate
113	(PART-A (c):- Consfrucfion of LT line Using 9Mtr long 300Kg PSC Pole with 4CX50 + 1CX50 + 1CX16 mm2 ABC -- 1.07Km (34Nos Span) (From poinf B to - C -- 0.12Km as shown in SLD -1 + A to B = 0.45Km as shown in SLD - 3 + A to B (Double Circuit)= 0.2Km as shown in SLD - 4 + C fo D = 0.12Km as shown in SLD - 6) and 2X35+1X25 mm2 ABC = 0.19Km (6NOs Spart) (Proposecf 25KVA DT to existing po/e = 0.07Km. as shown in SLD - 5 + A to B = 0.12Km (as shown in Si.D - 6) with erection of LT pole using 9Mtr long 300Kg PSC po/e = Of/\/o (as shown in SLD -5). (LT Line with PSC Pole)9Mtr. long PSC Pole 300 Kg.
114	LT Stay set complete
115	7/12 (SWG) G.I. Stay wire-Grade-2
116	LT Stay Clamp (1.4 kg / pair)
117	LT Stay Insulator
118	Pole clamp for Eye hook for (XLPE erial bunched cable)
119	Eye hook for (XLPE erial bunched cable 25-70mmsq)
120	Dead end clamp for suitable for messenger XLPE Aerial bunched cable (25-70mmsq)
121	Suspension clamp with EYE hook for ABC
122	4C x50mmsq + 1C x50mmsq + 1C x 16mmsq (Street light) (LT AB Cable)
123	2C x35mmsq + 1C x25mmsq (LT AB Cable)
124	Insulated piercing connector, Type B main 50 to 150mmsq and Tap 50 to 150sqmm.
125	Earthing of support (Coil type)
126	No.8 G.I. wire(dia 4.6mm) 0.131 KG/Mtr. -2Mtr. for connecting pole with coil earthing.
127	Danger Plate LT
128	Black Clamp for danger board plate 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 1No's. = (1x 0.59 x 0.510)
129	G.I. Barbed wire / Anticlimbing device (3Kg /support)
130	Black Clamp for anticlimbing device 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 4No. = (4x 0.59 x 0.510)
131	G.I. nuts, Bolts & washer of different size (3.55Kg each Cut pole)
132	Black paint (GIS Numbering and & Zebra Sripping)
133	Yellow Colour paint (GIS Numbering and & Zebra Sripping) for Background
134	Civil & ServiceFixing of LT complete stay set includes, 1. turn buckle Assembly, 2. Stay Rod & Stay plate, 3. Stay insulator, 4. Stay Wire, 5. Stay clamps with Nuts and bolts BA will do the excvation including excavation, suppy of 0.5 Cum Cement concrete foundaton 1:2:4 size (500mm x500mm x 800mm) using 20mm BHG Metal with all labour and material (Excavation of earth will be done of size 500 x 500 x 1500mm.)
135	Concreting ratio 1:1.5 : 3 (500mm x 500mm x 1500mm) =0.375 Cu. Mtr.
136	(PART-A (d):- Construction of Double Circuit LT line Using 11Mtr long WPB Pole with 4CX501CX501CX16 mm2 ABC 400m(with Double Ckt arrangement) (From point A to-B-02KmX2=0.40Km Km as shown in SLD-4 (LT Line with WPS Pole for double ckt arrangement1. LT AB Cable lineWPB (GI) Pole 160 x 152 (11Mtr. long 30.44KG/Mtr.)(Total Pole weight with base plate and shiffner = 334.84 Kg + 10.74 Kg = 345.58 Kg.
137	LT Stay set complete
138	7/12 (SWG) G.I. Stay wire-Grade-2
139	LT Stay Clamp (1.4 kg / pair)
140	LT Stay Insulator
141	Pole clamp for Eye hook for (XLPE erial bunched cable)
142	Eye hook for (XLPE erial bunched cable 25-70mmsq)
143	Dead end clamp for suitable for messenger XLPE Aerial bunched cable (25-70mmsq)
144	Suspension clamp with EYE hook for ABC
145	4C x50mmsq + 1C x50mmsq + 1C x 16mmsq (Street light) (LT AB Cable)
146	Insulated piercing connector, Type B main 50 to 150mmsq and Tap 50 to 150sqmm.
147	Earthing of support (Coil type)
148	No.8 G.I. wire(dia 4.6mm) 0.131 KG/Mtr. -2Mtr. for connecting pole with coil earthing.
149	Danger Plate LT
150	Black Clamp for danger board plate 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 1No's. = (1x 0.59 x 0.510)
151	G.I. Barbed wire / Anticlimbing device (3Kg /support)
152	Black Clamp for anticlimbing device 25x 3 mm flat 0.59Kg / Mtr. Flat of 0.510 Mtr. length 4No. = (4x 0.59 x 0.510)
153	G.I. nuts, Bolts & washer of different size (3.55Kg each Cut pole)
154	Black paint (GIS Numbering and & Zebra Sripping)
155	Yellow Colour paint (GIS Numbering and & Zebra Sripping) for Background
156	Civil & ServiceFixing of complete 11KV line complete Stay set includes, 1. turn buckle Assembly, 2. Stay Rod & Stay plate, 3. Stay insulator, 4. Stay Wire, 5. Stay clamps with Nuts and bolts BA will do the excvation including excavation, suppy of 0.5 Cum Cement concrete foundaton 1:2:4 size (500mm x500mm x 800mm) using 20mm BHG metal with all labour and material as per TPCODL drawing & Standard
157	Concreting ratio 1:1.5 : 3 (500mm x 500mm x 1800mm) =0.45 Cu. Mtr.
158	Coupping ratio 1:1.5 : 3 with dimension (500mm x 500mm x 450mm) =01125 Cu. Mtr.
159	(PART-A(e):- Line Protection Guarding for Road Crossing Guarding Channel 75x40x4.8 mm, 7.14 KG/Mtr., each channel length 3.5 mtr., 4 no's channel required =( 4x7.14x3.5) ( For Double Pole)
160	No-6 GI wire (0.192 kg/mtr.) for Main String
161	No-8 GI wire (0.131 kg/mtr.) for lacing
162	Eye Bolt (236mm, 16mm dia, 1.577kg/mtr.)
163	Gi Pipe Earthing 40mm. 3 Mtr. Long
164	50x6mm GI Flat for earthing, 2.36kg/mtr., (10.7 mtr For raising)= 10.7x2.36
165	Civil & ServiceConstruction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earthresistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of GI flataround pipe .
166	Part-A (f): Dismantalling materialsDismantling of 9/8 Mtr. PCC/Joist Pole
167	Dismantling/Removal of V Cross arm from pole
168	Dismantling of 11kV Pin Insulator with Pin
169	Dismantling of 11kV Disc Insulator with Hardware
170	Dismantling/Removal of MS Channel. from Double Pole Structure/pole
171	Dismantling of existing 11/0.4kV, 33/0.4KV, Three Phase Distribution Transformer 16KVA including removal of HT/LT leads, earth connections and unloading by crane if required
172	Dismantling of existing 11/0.4kV, 33/0.4KV, Three Phase Distribution Transformer 25KVA including removal of HT/LT leads, earth connections and unloading by crane if required.
173	Re-Installation, Testing and Commissioning of 11/0.4kV, 25kVA Single phase/3-Phase Distribution Transformer on existing structure as per TP Central Orissa Distribution Co. Ltd. specification including loading, unloading, shifting/transportation from site/tent upto 15KM, Testing of Transformer at Site. Scope of work includes jumpering/connection at HT and LT side & Earthing Connections.
174	Dismantling of ACSR/AAAC 34/55mm2 from overhead line
175	Dismantling of varous size of LT AB Cable
176	Dismantling of 11 kV/33KV GO/AB Switch/Isolator/DD fuse/fuse set
177	Dismantling of Lightening Arrester(LA Please Enable Macros to View BoQ information

Tender For Construction Of 25Kva S/S, With 11Kv & Lt Line Towards Shifting Of Existing Line & S/S From The Allignment Of The Road For Construction Of Pwd Road From R.D Road To Halia Sahi Road Under Mmsy Scheme At Banki Under R.W. Electrical Section,, Cuttack-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us