|
| 1 | Surface excavation not exc. 30cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and as directed. |
| 2 | Removing excavated materials exceeding 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed. |
| 3 | M&L for hardcore of gauge not exc. 63mm of broken stone or boulders, deposited, spread and levelled in layers not exc.15cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 4 | M&L for 100mm thick plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete, sub base, etc. including necessary form work complete all as specified and as directed. |
| 5 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 6 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:4) complete all as specified and as directed. |
| 7 | M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 8 | M&L for machine pressed precast concrete interlocking paverblock with grey cement and no pigment any shape and sizeconfirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and as directed. |
| 9 | M&L for plain cement concrete (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in side of paver block, path, rounded or chamfered on edges complete all as specified and as directed. |
| 10 | M&L for cement concrete 40mm thick (1:2:4) type B-1 (using 20mm graded stone aggregate) as in path, steps, etc. complete all as specified and as directed. |
| 11 | M&L for preperation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed. |
| 12 | S&F of cubical housing cabinet type LT panel board of size 1.2mx1.0mx0.5m out door type, platform mounted factory made of adequate size, totally enclosed dust and vermin proof openable from both front and rear side made out of 14 SWG (3.15mm) thick CRCA MS sheet of overall and built upon suitable size angle iron frame work, having front and rear hinged doors, Gl earthing strips at rear side, bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts, spring and washers. The cabinet and all members should be chemically treated with MSR solution for anticorrosive treatment and apply powder coated paint (RAL-7032). The panel should be suitable for 415 volts, 50 Hz, 3 phase 4 wire system and internal connection should be provided with aluminium strips of suitable size and necessary foundation work comprising with the followings:- |
| 13 | BUS BAR CHAMBER(a) Sheet steel bus bar chamber having front hinged covers with a set of electrolytic grade high conductivity TP&N solid aluminium bus bars, rated 250 amps supported at required intervals sleeved with heat shrinkable PVC sleevings. The bars shall be colour coded at required intervals for identification-SET OF 4 - 1 No.INCOMER(a) MCCB 100 amp, 16 kA, 415 volt, 50 Hz, 4 pole thermal magnatic type - 1 No.OUTGOING FEEDERS (a) TPN MCB 63 amp, 415 volt - 02 Nos.(b) SPN MCB 32 amp, 415 volt - 04 Nos.INDICATING DEVICES(a) LED Indicating lamps for Main Supply indicating R', Y' B' - Set of 3.(b) Voltmeter 0-500 volt with selector switch -1 No.(c) Current transformer of suitable capacity - SET OF 3.(d) Ammeter 0 to 500 amps with selector switch -1 No. Please Enable Macros to View BoQ information |
| 14 | BUS BAR CHAMBER(a) Sheet steel bus bar chamber having front hinged covers with a set of electrolytic grade high conductivity TP&N solid aluminium bus bars, rated 250 amps supported at required intervals sleeved with heat shrinkable PVC sleevings. The bars shall be colour coded at required intervals for identification-SET OF 4 - 1 No.INCOMER(a) MCCB 100 amp, 16 kA, 415 volt, 50 Hz, 4 pole thermal magnatic type - 1 No.OUTGOING FEEDERS (a) TPN MCB 63 amp, 415 volt - 02 Nos.(b) SPN MCB 32 amp, 415 volt - 04 Nos.INDICATING DEVICES(a) LED Indicating lamps for Main Supply indicating R', Y' B' - Set of 3.(b) Voltmeter 0-500 volt with selector switch -1 No.(c) Current transformer of suitable capacity - SET OF 3.(d) Ammeter 0 to 500 amps with selector switch -1 No. Please Enable Macros to View BoQ information |
