|
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering, and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed depositing the surplus excavated soil with in the compound in places shown by the departmental officers with intial lead and lifts and cleaning and levelling the site etc.,complete |
| 2 | Drainage |
| 3 | Plain Cement concrete 1:4:8 (one cement, five sand,ten aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted,etc., complete complying with standard specfication. |
| 4 | Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using of 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge |
| 5 | Collection, Supply and filling of Well gravel including cost and conveyance of gravel to work site and all labour charges for stacking them to departmental gauge at road sides for premeasurement by the departmental officers and spreading and compacting in layers as directed by the dept officers. |
| 6 | Centering for soffits of Plain slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed . |
| 7 | Drainage |
| 8 | Brick Work in Cement Mortor 1:5 Mix (one cement, five sand ) using new best country Bricks of size 8 ¾” x 4 ¼” x 2 ¾” from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications. |
| 9 | Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 10 | Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc., complete.- |
| 11 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete. |
| 12 | Paving the floor with Plain/Design Ceramic tiles ( Colour and shade as directed ) of Stain Free Nano Polish Vitrified Tiles of size 600 x 600 x 8mm in all floors over a base layer of cm 1:3 mix 20mm thick laid in situ and pointed with same coloured cement ( white cement mixed with colouring pigment ) neatly and fixed in position so as to make it perfectly smooth and shining,to the alignment etc.complete complying with standared specifications and as directed by the departmental officers. The sample colour and shade of the ceramic tiles should be got approved from the departmental officers before use in the works - 10m2. |
| 13 | Dadooing walls with following best approved quality, white / colour glazed tiles of 300mmx300mm set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 14 | Supply of polished shahabad stone slabs of 20mm thick with machine cut edges of size below 2' x 2' |
| 15 | Painting two coats with ready mixed Emulsion of first class quality paint and of approved color over a priming coat, including through scrapping, clean removal of dirt, etc., complete. |
| 16 | Supply and fixing of Granite slabs (Super fine polished with machine cut edges) of sizes 4'x2' and above 18mm to 20mm thick. laid over a base layer of cement mortar 1:3mix 20mm thick and pointed with white cement and pigment of suit the colour of stones and polished neatly as directed by departmental officers. |
| 17 | Supplying and laying Cement Concrete Rubber Moulded Hydraulic Pressed Paver Block M40 grade of 60mm thick high strength type confirming IS 15658-2007 of required size of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurrying bone pattern with stone dust cushion 100mm thick laying out of pavement cut the pieces to fix the edge vibrating the pavers, sweeping, transporting loading and unloading of paver block as per the standard specification. |
| 18 | Reinforced cement concrete 1:11/2:3 (one cement one and half sand and three aggregate) using 20mm size I.S.S. metal including cost conveyance of materials to site and all labour charges etc., mixing laying consolidating curring etc., but excluding cost of steel etc., complete as per standard specification |
| 19 | Supplying, fabricating and placing in position of mild steel or TMT rods, including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per SS |
| 20 | supplying and fixing of MS grill of approved design for doors and window using necessary mild steel flats for inner and outer members inclusive of priming coat of best approved qualit redoxide primer etc.complete complying with standard specifications |
| 21 | Painting two coats over new iron work with ready mixed paint of apprved quality and colour including cost of all materials and labour charges etc complete as per SS |
| 22 | Painting two coats over old iron work with ready mixed paint of apprved quality and colour including cost of all materials and labour charges etc complete as per SS |
| 23 | Supply and delivery of 1000 litres HDPE Tank including cost and conveyance of all labour charges etc, complete |
| 24 | Erection of 1 HP Submersible motor including cost of all charges etc, complete |
| 25 | Supply and delivery of 2.00 HP panel board suitable for above pump set with all accessories as per IE rules with Is specifation ect., complete |
| 26 | Supply and Delivery of 2.00 HP wet type submersible pump set 50lpmX40m head, confirming to IS 8034/89 with ISI marking along with 2.5 sq mm. cable (to 5m lengh) suitable for installation in 150 mm dia bore including Transportation charges etc., complete |
| 27 | Supply and delivery of 63mm HDPE hose including cost and conveyance of all materials to site and all labour charges etc., |
| 28 | Special design art work with first class quality enemal paint including wall putting priming coat extra complete and all other incidential charges if any as per standard specification |
| 29 | Supply and delivery of MS Kiosk of size0.75m x 0.45m x 0.75m made up of MSangle of size 50mm x 50mmx 4mm alroundcovered with 16 gauge MS sheet and kioskdoor made up of MS plates of size 25 mm x3 mm including cutting, welding, grinding,locking arrangements and labour chargesetc.(WD-M1471) |
| 30 | Wiring with 2x1.5sq.mm PVCinsulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm TWswitch boxfor 5A3 pinnoninterlocking Wallsocket with 5Aflushtype switch with painting of suitable colour with continuous earthwire connection of1.5sq.mmcopper wire for open PVC plug point(SD 36) |
| 31 | Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2\\" x 1-1/2\\" x 1/4\\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1\\" x 1/4\\" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete |
| 32 | Supply and delivery of 2.50 sqmm Copper Cable including cost and conveyance of all materials to site and all labour charges etc.,(SOR PAGE NO.142) |
| 33 | Supplying and fixing of Three PHASE DISTRIBUTION BOARD 4 ways three phase DBNo. of ways incomer MCB / Isolator - 4No. of ways incomer ELCB / RCD - 4No. of outgoings ways -12 (M-1886) |
| 34 | Supplying and fixing of 30W LED Street light fitting with LED outdoor fittings Higher end philips/havells/Equivalent etc complete(SD-456) |
| 35 | Supply and clamping of 2x6 sq.mm PVC armoured copper LTUG Cable on post or on wall with MS clamps(SD-216) |
| 36 | Supply and fixing of see saw 4 seater FRP seat to a height of 0.50 with 80mm dia leaver and 40mm top bar with M.S. pipe the seater is moulded plastic with heavy duty push bearing, the cost shall inclusive of all materials labours and fixing etc, complete as directed by the departmental officers. |
| 37 | Supplying and fixing of two seaters swing which is made up of 40mm dia GI pipe for side supports and swing bars connecting and chairs are with stand the weight of 100 kgs with stainless steel plates for seating arrangements including cost and conveyence of all materials and labour charges for manufacturing and fixing in position as directed by dept, officers, etc. complete |
| 38 | Supplying and fixing of slide which is made of 40mm dia GI/MS pipe for lader side supports, slider side supports and hand rails provided with 20mm GI pipe for lader and slider portion made up of stainless steel sheets as directed by dept. officers including cost and conveyance of all materials and labour for fixing in position. |
| 39 | Supplying, erecting and Fixing of 3 seater Granite seating bench. L shaped bases support in natural cement color of suitable size, as per standard specification. Complete (Size 2m x 0.45m x 0.75m and leg size 0.60m x 0.60m x 0.10m) |
| 40 | Supply of outdoor portable FRP Animal theme Dust bin of capacity 5L thickness 3mm height of 5 feet painted with UV-PU Emulsion paints |
| 41 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for brick masonry (SD-221) |
| 42 | Supplying and fixing of 4 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm)76.10mm OD x 3.65mm Thick x 4000mm Length (M-2116) Please Enable Macros to View BoQ information |
