|
| 1 | Excavation in foundation, trenches etc. earth work in all type of soil such as pick work, jumper work, blasting work kankar,mooram singles including decomposed soft and hard rock etc. upto all heights stacking the excavated earth not more than 3 metres clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths and sides of foundation etc.consolidating each deposited layer by raming and watering and then disposing of all surplus excavated earth upto all leads and lifts as directed by the Engineer in charge complete in all respects. |
| 2 | Providing and laying cement concrete 1:3:6 (1 cement:3 sand:6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of centring and shuttering in: Foundations and plinth including carriage of materials upto all leads and lifts complete in all respects. |
| 3 | Providing and laying cement concrete 1:1½:3 (1 cement: 1½ sand: 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in. |
| 4 | Foundation and plinth complete in all respects. |
| 5 | Walls any thickness (but not less than 0.10meter thickness including attached pilasters,buttresses plinth and string courses etc. from top of foundationlevel upto floor two level including all leads and lifts etc.complete in all respects |
| 6 | Providing and laying cement concrete work 1:2:4(1 Cement :2 Sand: 4 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work & rainforcement for reinforced concrete work in :- |
| 7 | Suspended floor, roofs landings shelves and their supports, balconies, beams, girders, bressumers and cantilevers up to floor two level including carriage of materials with in all leads and lifts, complete in all respects. |
| 8 | Providing and laying cement concrete 1:5:10 (1 cement: 5 sand: 10 graded stone aggregate 40mm nominal size) excluding cost of centring & shuttering in. |
| 9 | Providing form work with mild steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu reinforced concrete work and plain concrete work in: |
| 10 | Flat surfaces such as soffits of suspended floors, roofs , landing and the like ,i/c all leads and lifts, complete in all respects. |
| 11 | Vertical surface such as wall (any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like including carriage of materials upto all leads and lifts complete in all respects. . |
| 12 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level including cost of binding wires and carriage of materials upto all leads and lifts complete in all respects. |
| 13 | Providing and fixing SFRC main hole cover with frame and controlling chamber for wheel valves complete in all respects i.e. Locking arrangement etc. |
| 14 | Providing and fixing GMS Ventilating pipe / overflow pipe (25 to 32) mm dia including all fiting as required. |
| 15 | 10mm cement lasting in single code on fair side of brick / concrete wall for internal plasting upto floor two level including arrises internal angles , chambers not exceeding 80mm in grith and finished even and smooth in cement morter 1:3 (1cement :3 sand) with in all leads and lifts complete in all respects. |
| 16 | Providing and fixing Gun metal wheel valves ordinary split, tapper edge, non-rising spindle gate valves of class-1 for cold service (temp not exceeding 45 gegree Centrigrade) screwed type as per IS : 778-1984 .all leads and lifts complete in all respects. |
| 17 | 32mm dia |
| 18 | Supply, erection, testing & commissioning of horizontal spindle, horizontal split casing, radial split Single,/ Multi stages centrifugal pumps of standard make such as KSB Model MOV132/9 conforming to BIS 1520-1980 with upto date amendments read with BIS 9137-1978 or latest edition to handle clear water having characteristics as mentioned in item No.1 (A) as under, with impelleres, casing ring, priming funnels & shaft sleeves of bronze, shaft of steel with cast iron casing of suitable capacity coupled directly through a flexible coupling on a common base plate of cast steel /Mild steel to BHEL /Kirlokar/ NGEF/ Crompton / Siemen/Jyoti /GEC make slip ring /squirrel cage screen protected drip proof induction electric motor 20 HP for operation on the data given below i/c the cost all accessories in all lead & lift & carriage of material at site as per direction of Engineer-incharge. Existing pumping duty condtion. a) Total Head :- 194 mtr b) Discharge :- 3.85 LPs C. Rising Main: d) Dia: 5 0mm e) Length : 540 Rmt. |
| 19 | Providing and Fixing Cubical Type Floor mounted MS Sheet Angel chanel made Amirah MU-G-30,FASD(with Wideband coil)( HSN Code-8536 type panel duly powder coated suitable for 20 HP induction motor , comprising of following items :-Main Incommer MCCB of L&T / Havells Make of 100 A, Outgoing L&T make Contactors suitable for 20 HP motor ,Over Load Relay ,Star Delta Timer,Copper Bus Bar,Ampere Meter,Volt Meter,Push Button Green/Red,Indicating lamp RYB. |
| 20 | Providing and fixing double flanged Cast steel Sluice valve of Leader/KSB/Kirloskar and of 50 mm dia for rising main of class ASA - 300 and capable of with standing normal seat pressure as per IS-5312-1884 P-1 with upto date ammendement for Class ASA-300 as per direction of Engineer-in-charge including entire carriage of material upto all leads and lifts. |
| 21 | Providing and fixing double flanged Cast steel Reflux valve of Leader/KSB/Kirloskar and of 50 mm dia for common header of class ASA - 300 and capable of with standing normal seat pressure as per IS-5312-1884 P-1 with upto date ammendement for Class ASA-300 as per direction of Engineer-in-charge including entire carriage of material upto all leads and lifts. Please Enable Macros to View BoQ information |
