|
| 1 | Clearing Light jungle and disposing off to a place away from the site as directed by the Engineer in charge including all labour charges, T&Ps etc., complete. |
| 2 | Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete for in hard gravelly soil. |
| 3 | Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete for In SDR (Not Requiring Blasting). |
| 4 | Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete for In MR and DMR not requiring blasting. |
| 5 | Earth work excavation in all type of soil with an initial lead of 10m and initial lift of 2m etc., complete.for foundation.In Hard rock requiring Wedging and chesiling |
| 6 | PCC 1:3:6 using 20 mm HBG metal for foundation including cost of cement without formwork all materials, labour, lead, lift etc. complete. |
| 7 | PCC 1:2:4 mix using 20 mm down graded HBG machine crushed metal for plinth foundation concrete, cost of all labour, materials, lead, lift, curing etc. complete as per standard specification. Without Form Work. |
| 8 | PCC 1:2:4 mix using 20mm down graded HBG machine crushed metal for plinth foundation concrete, cost of all labour, materials, lead, lift, curing etc. complete as per standard specification. With form Work. |
| 9 | RCC 1:1.5:3 using 12 to 20mm machine crushed metal for road concrete with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement (For road concrete) |
| 10 | RCC 1:1.5:3 using 12 to 20mm machine crushed metal for cable duct bottom slab concrete with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement (For Culvert bottom raft) |
| 11 | RCC 1:1.5:3 using 12 to 20mm machine crushed metal for cable duct Side wall concrete with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement (For Culvert side wall) |
| 12 | RCC 1:1.5:3 using 12 to 20mm machine crushed metal for Culvert top slab concrete with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement (For Culvert top slab) |
| 13 | RCC 1:1.5:3 using 12 to 20mm machine crushed metal for precast cable duct slab with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement (For Pre cast cable duct slab) |
| 14 | Providing steel reinforcement using steel of grade Fe 500 for RCC works including cost of steel, binding wire and placing in postion of the steel reinforcement, including cost of all materials, lead, lift, etc., complete. |
| 15 | Brick work in CM 1:5 using II class chamber burnt bricks for cable duct wall including cost of all materials, all labour, lead, lift, curing, etc., complete. |
| 16 | Plastering in cm 1:3, 12 mm thick for concrete work including cost of cement, all materials, labour, lead, lift etc., complete. |
| 17 | Plastering in cm 1:5, 12 mm thick for wing wall including cost of cement, all materials, labour, lead, lift etc., complete. |
| 18 | Colour washing 2 Coats over a base coat of primer using Exterior weather coat using Asian APEX or Equivalent of approved Brand,quality and colour for outer wall surfaces for all floors including cost of all labours to work at all levels cost of materials brushes scaffolding charges etc. complete complying with standard specification and as directed. |
| 19 | Supplying, fabrication, galvanizing and fixing of GI / MS angles of various sizes to be fixed in the cable duct to the required length including cost of all materials, labour, lead, lift etc., complete. |
| 20 | Refilling the excavated earth including all lead, lift etc, complete. |
| 21 | Removal of excess earth to a distance of 2.00 Km with all lead, lift etc., complete. |
| 22 | Transporting and fixing of RCC cover slab from curing tank to working spot including cost of labour, lead, lift etc., complete. |
| 23 | Supplying and fixing readymade earth collars of size 60 cm inner dia with 30 cm height and shell thickness of 50 mm including cost of all materials,transport to site, labour, lead, lift, etc., complete., as per standard specification. |
| 24 | Supplying and fixing of 20 mm PVC bib cock including cost of all materials, etc., complete. |
| 25 | Providing and laying PVC high density pipe (10 kg. per cm2 ) including cost of all specials like coupling, bend etc., and including necessary earthwork and burrying , all material labour, etc., complete and as directed by the Engineer-in-charge at site. For 20 mm dia. |
| 26 | Providing and laying PVC high density pipe (10 kg. per cm2 ) including cost of all specials like coupling, bend etc., and including necessary earthwork and burrying , all material labour, etc., complete and as directed by the Engineer-in-charge at site.. For 32 mm dia. |
| 27 | Providing and laying PVC high density pipe (10 kg. per cm2 ) including cost of all specials like coupling, bend etc., and including necessary earthwork and burrying all material labour, etc., complete and as directed by the Engineer-in-charge at site.. For 40 mm dia. |
| 28 | Providing and laying PVC high density pipe (10 kg. per cm2 ) for provide weep holes in the retaining wall including all material labour, etc., complete and as directed by the Engineer-in-charge at site.. For 50 mm dia. |
| 29 | Providing pipe line for laying cable to breaker plinths with 110 mm dia PVC pipe 4 kg/cm2 including all specials and cost of all material, lead, lift, etc., complete as per standard specification and as directed by the Engineer-in-charge at site. |
| 30 | Providing and fixing wheel valve of 32 mm diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete and as directed by the Engineer-in-charge at site. |
| 31 | Providing and fixing wheel valve of 40 mm diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete and as directed by the Engineer-in-charge at site. |
| 32 | Fabrication, galvanizing and supply of foundation bolts of 20 mm dia 1.20m length including providing cleat at bottom and threading at top including cost of all materials, labour lead lift etc., complete. |
| 33 | Fabrication of Template and assembling in correct position for various equipment plinth and grouting the foundation bolts including cost of all materials, labour, lead, lift etc. complete.as directed by the dept. Engineer at site. |
| 34 | Supplying and spreading of metal jelly of size 12 mm to 20 mm to an average thickness of 10 cm and over 10 cm stone dust including cost of all materials lead, lift watering and levelling surface etc., complete. |
| 35 | Providing and laying spreading and compacting graded stone aggregates to wet mix macadum 250 mm thick specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed materials by tipper to site laying in uniform layers with pavers in sub / base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of materials labour charges rentals for mahinery fuel and all other incidental charges etc. complete as per clause 406 of MORTH Rev.5. |
| 36 | Conducting check survey, pit marking for tower foundation as per the approved profile including cost of all T & Ps, transport, labour,all lead, all lift and all head load etc complete. |
| 37 | Providing shoring and shuttering during excavation and concreting works using country wood planks and scantlings including cost of all materials and all albour charges, lead and lift etc., complete as directed by the Engineer incharge at site. |
| 38 | Fixing of stub and cleat with supply of template to site and assembling at site and shifting the template from loc to loc including cost of all materials for stub and cleat and template ,labour, fabrication charges etc complete. For KCR. |
| 39 | PCC 1:2:4 using 12 to 20mm metal for foundation, frustum and chimney with formwork, frustum and chimeny box including cost of all materials lead lift etc complete. |
| 40 | Providing pipe type earthing including necessary excavation for fixing 3m long 25mm dia GI \\"B\\" class pipe and refilling with excavated earth mixed with soft charcoal and connect the earthstrip with the leg of the stub including all cost of materials, lead, lift etc complete. |
| 41 | Providing Special type earthing arrangements for Teriminal tower including necessary excavation for fixing 3m long 100mm dia CI class pipe, 60cm dia with 5cm shell thick of RCC collar and refilling with excavated earth mixed with soft charcoal and connect with the leg of the stub with 50x10mm MS flat and providing GI barbed wire as per the instruction of site engineer including all cost of materials lead lift etc complete. |
| 42 | Labour charges for dismantling of GI tower angles In good Condition and HT steel angles including T & P, labour, lead, lift etc complete. as per approved drawing and specification. In good Condition. |
| 43 | Erection of GI tower angles, fabrication of tower angles (if required) and punching of bolts and nuts immediately after erection of towers, tightening , punching , final checking, providing holes wherever necessary and final checking etc., including cost of materials, T & P,labour, lead, lift, painting of bolts for identification including cost of all labour charges etc., complete. etc complete. as per approved drawing and specification. |
| 44 | Providing full welding of all bolts and nuts in the erected towers from ground level to the cross arm bottom level in the tower including painting of bolts and nuts with two coats of best quality of cold galvanised paint having atleast 90% zinc content and approved by the Engineer at site including cost of paint and all other materials, hire charges for diesel generator and welding transformer, all labour, transport charges etc complete. |
| 45 | Labour charges for releasing and rehoisting of 7 units of 90 KN insulators for panther and fixing of SS fittings for panther with all allied hardwares including all cost of labour, lead, lift, T & P etc complete. Without PA rod for panther. |
| 46 | Labour charges for releasing and rehoisting of 8 units of 120 KN insulators for panther and fixing of ST fittings for panther, S.B damper with all allied hardwares including all cost of labour, lead, lift, T & P etc complete. |
| 47 | Labour charges for releasing and lowering of 3 Nos of Panther conductor, rough sagging, tensioning, clipping, providing vibration dambers at tension locations including jumber connections, providing trussals at various intervals for avoiding damages of conductor including transport charges, loading, unloading, lead, lift, labour and cost of T&P etc complete. Under LC condition |
| 48 | Labour charges for Re- stringing of 03 Nos of Panther conductor, rough sagging, tensioning, clipping, providing vibration dambers at tension locations including jumber connections, providing trussals at various intervals for avoiding damages of conductor including transport charges, loading, unloading, lead, lift, labour and cost of T&P etc complete. Under LC condition |
| 49 | Labour charges for releasing lowering and restringing of GI earth wire 7/3.55mm including paying out, jointing, rough sagging, tensioning, clipping, providing vibration dambers at tension locations including jumber connections, including transport charges, loading, unloading, lead, lift, labour, clipping the cable joints and cost of T&P etc complete. Under LC Condition. |
| 50 | Painting with two coats of anticorrosive paint over tower leg at a height of 45cm including all cost of materials, labour, lead lift etc complete. |
| 51 | Providing temporary guys wherever necessary including excavation, buryingout of anchor for staywire, tightening, dismantling the same after completion of works including cost of all materials, lead, lift, labour etc complete. |
| 52 | Lowering the HT/LT Line during stringing of power conductor and earthwire after restringing the same in original position including labour,lead, lift etc complete. |
| 53 | Providing trussels for major and minor road crossing including cost of all materials, labour, lead lift etc. Complete. |
| 54 | Fabrication, galvanisation and supply of standard MS towers part for tower stub & cleat as per department approved drawing/design including stacking of tower parts, transporting of tower parts to site including all taxes and duties, fright charges etc, complete. The raw materials standard should be as per IS 2062 and for galvanishing as per IS 2633 and 6745 (Latest code), The governing standards for towers should be as per the specified IS codes directed by Depertmental engineer.(The contracter need to arange for inspection of towers at purachase factory at his own cost) . |
| 55 | Supplying, Transportation from source to site , fabrication, galvanising of standard Bolts and nuts of various sizes and various lengths as per department approved drawing including all taxes and duties, lead, lift and head load, freight charges etc., the raw material standard should be as per IS 2633 and 6745 and as per specification as per IS code directed by department engineer at site. |
| 56 | Supply, transport and fixing of Single Tension fittings for panther as per IS standard and departmental specifications by the engineer incharge at site. |
| 57 | Supply, transport and fixing of Aluminium Earth Bond as per IS standard and departmental specifications by the engineer incharge at site. |
| 58 | Supply, transport and fixing of Single tension fittings for EW 7/3.55mm as per IS standard and departmental specifications by the engineer incharge at site. |
| 59 | Supply, transport and fixing of Mid span joint for Panther as per IS standard and departmental specifications by the engineer incharge at site. |
| 60 | Supply, transport and fixing of Repair sleeve for Panther as per IS standard and departmental specifications by the engineer incharge at site. |
| 61 | Supply,Transport of Number Plate as per IS standard and departmental specifications by the engineer incharge at site. |
| 62 | Supply,Transport of Phase Plate as per IS standard and departmental specifications by the engineer incharge at site. |
| 63 | Supply,Transport of Danger Board as per IS standard and departmental specifications by the engineer incharge at site. |
| 64 | GST for bidders within Tamil Nadu |
| 65 | GST for bidders outside Tamil Nadu (IGST) Please Enable Macros to View BoQ information |
