|
| 1 | Earthwork excavation in all classes of soil except soft roacck not requiring blasting and hard rock r blasting and depositing on bank with all leads and lifts as per ss20B,including all cost of all labour ,equipments and all incidental charges such as bailing our water ,providing and maintaining necessary cofferdams, sheeting,shoring bracing and their subsequent removal,removal of all logs ,stumps ,grubs and other deleterious matter and obstructions,trimming bottom of excavation backfilling, and clearing the site and disposal of all surplus materials etc.,complete as per relevant standard specification for foundation of drain |
| 2 | Supplying and filling in foundation and basement with filling M sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification. |
| 3 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 4 | Supplying and erecting centering for vertical plain/ RCC concrete walls of supply channel, retaining wall etc upto 90Cm height with necessary supports,all cross bracing with mild steel size of 90cm x60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x25 mm x3mm for bearing laid silver Oak/ Country wood joist of size 7.50 cm x5.0 cm spaced @ about 90 cm C/C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C/C etc,, complete complaying with standered specfications and as directed by the departmental officers. - |
| 5 | Rcc Wall |
| 6 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 7 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) |
| 8 | Painting 2 coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete. |
| 9 | Supply and Erection of 8 M Height Octagonal street light pole:Supply, Erection of 8m Free Standing Single Arm Bracket 8 sided Octagonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70mm Thickness of Pole - 3 mm. The pole should be hot dip galvanized confirming to BESN ISO -1461 with thickness of 65 Micron etc., complete. as per standard specification. |
| 10 | Supply and Delivery of 60W LED Street light fitting made up of pressure die cast aluminium housing with heat resistant toughened glass cover confirming to IP66. Separate compartment for LEDs & electronic driver with CCT of 5000K, PF > 0.9. System efficacy >80. Operating voltage range of 120V to 270V with surge arrestor of 5.0 KV. Driver current not than 700mA. Approx. weight of 5.2Kgs. THD < 10%. Optics is of TYPE III Distribution. Lumens package not less 120 lm/W for LED Source. Test certificate from NABL accredited lab for LM79 report. In house Testing facility to be available for the same etc complete as per standard specification. |
| 11 | Labour charges for Erection of 8M Octogonal Pole,Heritage type Bracket and 60W LED Hertiage type fitting With Complete set with all labour charges, Crane Charges / Hydraulic ladder Charges etc; complete as per Standard Specification.as directed by the departmental officers. |
| 12 | Supply and laying of 3 core x 1.5 Sq.mm FR PVC copper cable for LED Power supply Cable, including Labour Charges as per standard specification. etc., complete. as directed by the departmental officers. |
| 13 | Supply and laying of. U.G. cable:Supply and laying of 2 core x 10 sqmm PVC armoured (Aluminium) L.T.U.G. cable in a trench to be excavated at a depth of 0.7mtr putting 0.15 mtr layer of sand and covering the cable completly with bricks and sand and refilling the earth to make good. the Department for the excess usage of materials) |
| 14 | Supply and Laying of 50mm/38mm dia HDPE pipe on ground with necessary clamping arrangements etc complete.As directed by the departmental officers. |
| 15 | Supply and fixing of 1 phase Street light EB Service Main Switch box Mounted to EB Pole in Size of 0.75m x 0.45m x 0.75m Made out of 16SWG CR sheet Enclosed with Glass to View of Energy Meter with powder coated Painted in suitabe Colour with lock and key Door arrangements, including 40mm PVC Pipe, 7/20 Wire, 32A DP MCB, 63A Fuse unit, Timer & Contactor etc., Complete, as per Standard specification as per EB requirements as directed by departmental officers. Please Enable Macros to View BoQ information |
