|
| 1 | Civil Work |
| 2 | PUMP HOUSE |
| 3 | Earthwork excavation in hard stiff clay,black cotton, hard red earth, shales,murrams, ordinary gravel stoney earth mixed with 50% fair sized boulders etc.,with initial lead of 10m and lift Ist depth of 2m |
| 4 | Filling with clean river sand complying with standard specification including watering ramming and consolidation etc.,For Foundation |
| 5 | Levelling coarse in cement concrete 1:4:8 (one cement,four sand and eight aggregate) using 40mm hard broken stone for foundation and leveling coarse including cost of all materials,mixing,placing, ramming, curing,finishing etc., complete and as directed For foundation |
| 6 | Refilling the foundation with excavated Soil (other than sand) in layers more than 15cm thick, watering, well ramming, consolidating, complying with standard specification |
| 7 | Brick work in CM 1:5 using country bricks for basement of size 8.75\\" X 4.25\\" X 2.25\\" including cost of all materials, labour charges, curing etc., for basement |
| 8 | Brick work in CM 1:5 using country bricks for basement of size 8.75\\" X 4.25\\" X 2.25\\" including cost of all materials, labour charges, curing etc., for Super structure |
| 9 | Reinforced Cement Concrete 1:1.5:3 (One cement,one and half sand and three aggregate) using 20 mm Machine crushed HBG stone for the following members excluding the cost of reinforcement and fabricating, centering, shuttering and strutting charges but including the cost of all materials, mixing, placing in position, lifting, vibrating, finishing & curing, etc. complete. UP TO GL |
| 10 | AT GROUND FLOOR |
| 11 | Supply and erection of steel centering,shuttering for soffits and sides including necessary supports and strutting for all RCC works using MS sheets of suitable size of BG 10 stiffened with MS angle of size 25X25 X3mm for boarding laid over Silver Oak joists of size 10cm X 6.5cm space at 10cm c/c and supported by Casurino Props10cm - 13cm spaced at 75cm c/c etc., |
| 12 | For 0.00 to 3.60 M (Plane Surface) beam, |
| 13 | 3.60M TO 4.90 M beam ,lintel |
| 14 | 4.90M TO 5 M Plane surface roof slab |
| 15 | For square column upto 3.30 msqare Surface) |
| 16 | For square column 3.00 to 4.00 M (sqare Surface) |
| 17 | For square column 3400 to 5.00 M (sqare Surface) |
| 18 | Supply, delivery fabrication and placing in position of MS, RTS rods for reinforcement MS / RTS rod of size upto 16 mm dia. for binding ring, pilasters, roof slab and well curb including cost of binding wire etc.complete |
| 19 | Levelling coarse in cement concrete 1:4:8 (one cement,four sand and eight aggregate) using 40mm hard broken stone for foundation and leveling coarse including cost of all materials,mixing,placing, ramming, curing,finishing etc., complete and as directed For foundation |
| 20 | cement concrete 1:2:4 (one cement,two sand and four aggregate) using 40mm hard broken stone for foundation and leveling coarse including cost of cost of all materials,mixing,placing, ramming, curing,finishing etc., |
| 21 | FOR FLOORING |
| 22 | Plastering with Cement mortor 1:5, 12mm thick including cost of all materials, Labour charges, curing etc., complete |
| 23 | Special ceiling Plastering for RCC slabs, beams and sunshades with Cement mortar 1:3, 10mm thick including cost of all materials, labour charges, hacking,curing etc., complete |
| 24 | FOR ROOF CEILING |
| 25 | Painting two costs with approved cement paint over the exposed surface including cleaning, preparing surface and curing etc., complete as directed by TWAD Board Officers. |
| 26 | Weathering course with surki concrete by using broken brick jelly 20mm size in pure slaked lime over RCC roof slab, the proportion (being 32:12.5) for required depth of 80mm for giving required slope and thickness to roof as required, well beaten with wooden beaters, including cost of all materials, labour charges, curing etc., complete and as directed by Officers. |
| 27 | Finishing the top of weathering course with one course of hydraulic machine pressed tiles of size 20cm x 20cm x 2cm of approved quality using CM 1:3 mixed with crude oil 10% by weight of cement and pointed with same oiled mortor including cost of all materials, labour charges, curing etc., complete and as directed by Officers. |
| 28 | Suplly, delivery and fixing of Rolling Shutter for the following size including two coats of red oxide locking arrangements etc., complete as directed by Officers. |
| 29 | FOR DOOR OF SIZE 3.00 X 2.70 M |
| 30 | Supply, delivery and fixing of M.S.Windows with M.S. angles,M.S. flats, M.S.Sheets including cost of all accessories fabrication charges with two coats of red oxide painting etc., complete |
| 31 | For window of size 1.5x1.20 M |
| 32 | Suplly, delivery and fixing OF MS Ventilator ( 0.6 x 0.45 m )including cost of all materials, labour charges and cost of fittings etc., complete |
| 33 | Painting the Emblum and writing the slogon in accordance with size and specifications as approved by the Officers with approved colour and quality of paint on the exterior surface of Pump room complete etc., |
| 34 | Supply of Lock |
| 35 | construction of Toilet-1no. |
| 36 | Earth work excavation in hard stiff clay, black cotton hard red earth, shales, murram, ordinary gravel stoney earth mixed with 50% fair sized boulders etc., with an initial lead of 10 m and lift of 2 m for foundation |
| 37 | Supply and filling the foundation and basement with clear river sand in layers complying with standard specification including consolidation and watering etc. complete |
| 38 | Levelling coarse in cement concrete 1:4:8 (one cement,four sand and eight aggregate) using 40mm hard broken stone for foundation and leveling coarse including cost of all materials,mixing,placing, ramming, curing,finishing etc., complete and as directed For foundation |
| 39 | Brick work in CM 1:5 using country bricks of size 8.75\\" X 4.25\\" X 2.25\\" including cost of all materials, labour charges, curing etc., complete |
| 40 | Supply and erection of steel centering, shuttering for soffits and sides including necessary supports and strutting for all RCC works using MS sheets of suitable size of BG 10 stiffened with MS angle of size 25 X 25 X 3mm for boarding laid over Silver Oak joists of size 10cm X 6.5cm space at 10cm c/c and supported by Casurino Props 10cm - 13cm spaced at 75cm c/c etc., complete for 0.00 to 3.30 M (Plane Surface) |
| 41 | Reinforced Cement Concrete 1:1.5:3 (One cement,one and half sand and three aggregate) using 20 mm Machine crushed HBG stone for the following members excluding the cost of reinforcement and fabricating, centering, shuttering and strutting charges but including the cost of all materials, mixing, placing in position, lifting, vibrating, finishing & curing, etc. |
| 42 | Filling with clean river sand complying with standard specification including watering ramming and consolidation etc., |
| 43 | For Basement |
| 44 | Filling with excavated earth in layers and consolidation |
| 45 | Levelling coarse in cement concrete 1:4:8 (one cement,four sand and eight aggregate) using 40mm hard broken stone for foundation and leveling coarse including cost of all materials,mixing,placing, ramming, curing,finishing etc., complete and as directed For flooring |
| 46 | Plastering with Cement mortor 1:3, 12mm thick including cost of all materials, labour charges, curing etc., complete |
| 47 | for flooring |
| 48 | Plastering with Cement mortor 1:5, 12mm thick including cost of all materials, labour charges, curing etc., |
| 49 | Special ceiling Plastering for RCC slabs, beams and sunshades with Cement mortar 1:3, 10mm thick including cost of all materials, labour charges, curing etc., |
| 50 | Plastering with Cement mortor 1:3, 12mm thick including cost of all materials, labour charges, curing etc., |
| 51 | Roof slab top |
| 52 | Supply and Paving of White coloured glassed Ceramic tiles of size 15cm x 15cm x 6mm finished thickness with CM 1:3 20mm thick and pointed with same colour cement including cost of all materials, labour charges, curing etc., |
| 53 | Painting two coats using approved cement paint for the cement plastered surfaces including cost of all materials, labour charges, etc., |
| 54 | Supplying, fabricating and placing in position of Steel rods(above 16 mm diameter) for reinforcement including cost of steel and binding wire, labour charges etc., |
| 55 | Precast slab with Reinforced Cement Concrete 1:2:4 (One cement,two sand and four aggregate) using 20 mm Machine crushed HBG stone for the following members excluding the cost of reinforcement and fabricating, centering, shuttering and strutting charges but including the cost of all materials, mixing, placing in position, finishing & curing, etc. complete.and as directed by Officers. |
| 56 | septic tank (as soak pit) |
| 57 | Supplying and fixing in position Indian water closet of size 580 x 440 mm white glazed earthernware of approved quality with P or S trap conforming to IS 2556 Part xii with sand cushion and forming chlorine around the closet |
| 58 | Supply laying and jointing the glazed stoneware pipe of 100mm dia and 60cm length of approved quality with spigot and socket ends in dry condition with spunyarn and cement joints including earth work excavation of the required depth for trenches |
| 59 | Supply and fixing of 100mm dia stone ware bend (from Water closet to Septic tank) |
| 60 | Supply and fixing of 100mm dia AC Ventilating pipe for a length of 6m with cover. (142.6+142.6+77.8+19.95) |
| 61 | Providing lighting wiring |
| 62 | Supply and fixing of 1no of 40Watts Incandescent bulb 230V/250V Grade BC/ES with ISI withTW round block on wall or ceiling with fluorecent tube with PVC unsheathed leads from terminals to the fitting with 1 No. tube. SD |
| 63 | Internal water supply arrangements |
| 64 | 25 mm dia PVC Pipe |
| 65 | 25 mm dia G.M. ferrule |
| 66 | 25 mm dia upvc. Ball Valve |
| 67 | 25 mm dia PVC Tee |
| 68 | 25 mm dia PVC Elbow |
| 69 | 25 mm dia G.I Coupling |
| 70 | 25 mm dia G.I. Union |
| 71 | 20 mm dia PVC screw down taps heavy type |
| 72 | Supply and delivery and fixing of HDPE tank 500 litres capacity as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing over the Platform including cost of platform |
| 73 | Plumbing Charges |
| 74 | Supply, delivery and fixing of MS Door and as directed by officers. |
| 75 | Ms Door of size 0.75X.2.10 |
| 76 | Supply, delivery and fixing of jolly work of cement and as directed by officers. |
| 77 | jolly work of size 0.20X.0.20 |
| 78 | PUMPING MAIN |
| 79 | Supply and delivery of the following sizes of DUCTILE IRON SOCKET/SPIGOT PIPES FOR CLASS K7/ K9 AS PER IS 8329/2000 other specifications including transportation to stock yard any where in Tamilnadu etc., complete |
| 80 | 200 mm DI K7 CL |
| 81 | Supply and delivery of the following sizes of DUCTILE PN10 FLANGED 4.0M PIPES FOR AS PER IS 8329/2000 other specifications including transportation to stock yard any where in Tamilnadu etc., complete |
| 82 | 200 mm DI D/F PIPE |
| 83 | Supply and delivery of DI specials of conforming to IS 9523/2000 specifications at site of work including loading, transportation, unloading, insurance etc., complete and as directed by the dept officers - For K7 Pipes |
| 84 | 200 mm 90o DI Double Socket Bend - 6 Nos - 29 Kg Each |
| 85 | Supply and delivery of DI specials of conforming to IS 9523/2000 specifications at site of work including loading, transportation, unloading, insurance etc., complete and as directed by the officers |
| 86 | 200 mm DI Flanged Socket Tailpiece - 4 Nos - 20 Kg Each |
| 87 | Supply and delivery of following sizes of CI D/F Sluice Valves for nominal pressure, Air Valves, Non return Valve, Butterfly valve and Gate valve suitable for operating with CI handle and key rod etc., specials, Surface box and other jointing materials inclusive of transportation charges anywhere in Tamilnadu and as directed by officers.(As per Annexure) |
| 88 | 350 mm DI D/F Gate Valve in 350mm DI main |
| 89 | 200 mm DI D/F Gate Valve in 250mm DI main |
| 90 | 80 mm DI Single Chamber Air Release Valve in 300 mm DI main |
| 91 | Cost of Unloading, stacking at stock yard and Conveyance from stock yard to site (maximum of 8Km radius) |
| 92 | 350MM DI PIPE - 2800M |
| 93 | Earth work open well excavation for foundation & depositing on bank with an initial lead of 10 m & lift of 2 m for depths in all kind of including dewatering of water as and when required, barricading with safety lamps etc all complete as per standard specification as directed by the Departmental Engineer. |
| 94 | 200mm Dia |
| 95 | 350mm Dia |
| 96 | Refilling with excavated soil (other than sand)complying with standard specification inlayers of 15cm watered well rammed and consolidated after the pipes and specials arelaid,jointed and tested etc. and removing and depositing the surplus earth at the places as directed by Officers |
| 97 | 200mm Dia |
| 98 | 350mm Dia |
| 99 | Lowering of DI pipes and specials to trench and laying to propoer grade and alignment |
| 100 | 200mm Dia |
| 101 | 250mm Dia |
| 102 | 350mm Dia |
| 103 | Jointing of DI Pipes with rubber gaskets (tyton joint) including cost of lubricants. (including cost of jointing materials) etc all complete |
| 104 | 200mm Dia |
| 105 | 350mm Dia |
| 106 | Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to the required specifications with M.S. bolts and uts, complete.(including cost of jointing materials) as directed by Officers |
| 107 | 200 mm DI PIPE |
| 108 | 350 mm DI PIPE |
| 109 | Cutting D.I. Pipes true to axis and filing smoothly and finishing the ends complete as directed by Officers |
| 110 | 200 mm DI K7 CL |
| 111 | 250 mm DI K7 CL |
| 112 | 350 mm DI K7 CL |
| 113 | Testing of M.S. / C.I. / D.I / P.V.C. / H.D.P.E pipes with hydraulic testing equipment by filling with water (includin cost of water @ Rs. 60/KL) and testing to recommended pressure in convenient stetches and attending the bursts if any occured during the test, excluding the cost of pipes, including other incidential and operational charges etc., complete for the following diametres of pipes. |
| 114 | 200 mm DI K7 CL |
| 115 | 350 mm DI K7 CL |
| 116 | Construction of following masonry valvepit as per TWAD type design for the following Sluice valve including earth work excavation for foundation, PCC 1:4:8 using 40 mm HBG metal for levelling course, Brick work in CM 1: 5 for side wall, plastering with C M 1: 3, 12 mm thick, RCC 1: 1.5:3 using 20 mm HBG stone jelly for precast cover slab, providing PCC Stone in CC 1: 3:6 using 20 mm HBGS including supplying, fabricating, placing RTS grills including charges for fixing surface box, refilling the sides of the pit etc., |
| 117 | 350 mm DI D/F Gate Valve in 350 mm DI main |
| 118 | 200 mm DI D/F Gate Valve in 200mm DI main |
| 119 | 80 mm DI Single Chamber Air Release Valve in 300 mm DI main |
| 120 | Providing thrust blocks in RCC 1:1.5:3 using 20 mm HBG metal including cost of centering, shuttering & strutting and reinforcement, laying of concrete ,curing & finishing etc complete In K7 pipes as directed by dept Officers. |
| 121 | 350 mm 90o DI Double Socket Bend |
| 122 | 200 mm 90o DI Double Socket Bend |
| 123 | PUMP SETS |
| 124 | Supply and delivery of Horizontal split casing centrifugal pump conforming to IS 1520 with CI casing and split glands, stainless steel shaft, hydraulically and dynamically balanced bronze impellers capable of discharging required quantity of water against a total head noted below due to all causes and with the accessories such as G.M air release cock, Grease cup, G.I priming funnel, M.S lifting hook, drip water G.I pipe connections, leading to the outside of pump house rubber water deflector, double flap foot valve, G.M strainer including unique tyre type coupling, common M.S fabricated base to mount pump and motor and other standard fittings etc complete. Pump shall be capable of discharging the specified quantity at the head noted at the minimum NPSH at site conditions. The shut off head shall be atleast 25% over and above the head at duty point. The pump shall be suitable for operation in AC three phase ,415 V , 50 Hz , 1500 RPM. |
| 125 | 4500 LPM X 75M HEAD, 90 HP 1+1 |
| 126 | HORIZONTAL SQUIRREL CAGE MOTOR 1500 RPMAC three Phase /415 V/ Horizontal SPDP 4 Pole Squirrel cage Induction motor for HSC Centrifugal pumps Supply and delivery of AC three Phase 4 pole Horizontal squirrel cage Induction motor confiriming to IS 325/1996 and as amended thereafter with Class F insulation to suit the speed of pump and suitable for operation with continous S1 rated, 415V +/- 10 %, 50 HZ +/- 5% supply , TEFC (upto 20 HP), SPDP (above 20 HP). The motor offered should be of energy efficient motors. |
| 127 | 4500 LPM X 75M HEAD, 90 HP 1+1 |
| 128 | Supply and delivery of Fully Automatic Auto Transformer Starter suitable for the motor offered. Floor mounting type air/ oil cooled Auto Transformer Starter with tapings at 50%, 65%, 80%, housed in robust steel chamber with arc and main contacts confirming to IS 8544 Part IV and as amended therafter for operation in AC three Phase 50 Hz (+/- 5%), 415V (+/- 10%) with the following components, under voltage release with no volt coil, over load relay with dash pot arrangements, single phasing preventor, LED ON/ OFF switches, Mounted Ammeter, Earth leakage relay, contactor assembly suitable for next standard KW rating, in coming and out going cable entry provisions, transformer tank including first filling of oil etc. |
| 129 | 4500 LPM X 75M HEAD, 90 HP 1+1 |
| 130 | Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP , Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation, complete as directed by TWAD Board Officers. |
| 131 | 1000LPM X 40 M HEAD ,10HP |
| 132 | Supply and delivery of star delta starter confirming to IS13947, ICE 60947-1 suitable KW rating for operation in AC/ three Phase/50HZ(+/- 5%) and 415V (+/- 10%) including Ammeter, Overload relay, under Voltage release with no Volt coil, Air Break contactors suitable for next Standard higher KW rating, Single phase preventor, dry running preventor and On/ Off Push button switches, including the capacitor(the cost of capacitor is to be taken separately), where Panel Boards are already avalable, complete |
| 133 | 1000LPM X 40M H, 10HP |
| 134 | Supply and delivery of 46 KVAR capacitor in single |
| 135 | Providing twin CI earthing for all the starters pumpsets and equipements in the pumproom as per IE rules including construction of earth pit with RCC slab |
| 136 | Above 60-150 HP |
| 137 | 2 Nos 315 Amps MCCB - 4 Pole to control incoming supply to Panel Board |
| 138 | 3 Nos 150 Amps MCCB for 4400 LPM X 75M HEAD, 90 HP 1+1 with Interlocking arrangements |
| 139 | 2 Nos Amps MCB for 1000LPM X 40M HEAD ,10HP with Interlocking arrangements |
| 140 | 1 no.of 63 Amps MCCB to control outgoing suppy to vacuum pumpset |
| 141 | Multi Functions Meters - Flush type for M V Panel Board LED type, CT/PT, Voltage, Current, Frequency, Kilowatt, Kilo Volt Ampere, KVAR , KVAH, Run Hours, unbalance(V,A), Rpm, Phase angles,Thd - Class 0.5 With RS 485 Port |
| 142 | Supply and delivery of L.T. Cables 95 sq.mm - 3.5 core -1.1 KV Grade Armoured Aluminium conductor cross linked Poly Ethylene insulated PVC sheathed cables confirming to IS 7098 (Part I)/1988 with ISI marking, complete and as directed by Officers LT Supply point to Panel Board. |
| 143 | Laying of L.T.Cables in trenches inside the pump room or in air, complete. and as directed by Officers. -95 sq.mm. |
| 144 | Jointing of L.T.Cables - 95 sq.mm - 3.5 core - 1.1 KV Grade Armoured Aluminium conductor cable confirming to IS 1554/ Part 1 with ISI marking, complete. and as directed by Officers. |
| 145 | Supply and delivery of L.T. Cables 95 sq.mm - 3 core -1.1 KV Grade Armoured Aluminium conductor XLPE insulated PVC sheathed cables confirming to IS 7098 (Part I)/1988 with ISI marking, completes - FOR IW PUMPSETS Wells 1-4 |
| 146 | Laying of L.T.Cables in trenches below GL including EW, complete. . - 95 sq.mm |
| 147 | \\"Jointing of L.T.Cables - \\"&G470&\\" 95sq.mm - 3 core - 1.1 KV Grade Armoured Aluminium conductor cable confirming to IS 1554/ Part 1 with ISI marking, complete. |
| 148 | Supply and delivery of L.T. Cables 35 sq.mm - 3 core -1.1 KV Grade Armoured Aluminium conductor XLPE insulated PVC sheathed cables confirming to IS 7098 (Part I)/1988 with ISI marking, completes - FOR IW PUMPSETS Wells 1-4 |
| 149 | Laying of L.T.Cables in trenches below GL including EW, complete. . - 95 sq.mm |
| 150 | \\"Jointing of L.T.Cables - \\"&G470&\\" 95sq.mm - 3 core - 1.1 KV Grade Armoured Aluminium conductor cable confirming to IS 1554/ Part 1 with ISI marking, complete. |
| 151 | For Supply and delivery of 140 KVAR capacitor in single |
| 152 | Supply and delivery of L.T. Cables 70 sq.mm - 3 core -1.1 KV Grade Armoured Aluminium conductor XLPE insulated PVC sheathed cables confirming to IS 7098 (Part I)/1988 with ISI marking, complete - For Supply and delivery of 140 KVAR capacitor in single |
| 153 | Laying of L.T.Cables in trenches inside the pump room or in air, complete.. - 70sq.mm |
| 154 | \\"Jointing of L.T.Cables - \\"&G477&\\" 70sq.mm - 3 core - 1.1 KV Grade Armoured Aluminium conductor cable confirming to IS 1554/ Part 1 |
| 155 | For Vacuum Pumpset - 1 Nos |
| 156 | Supply and delivery of L.T. Cables 4 sq.mm - 3 core -1.1 KV Grade Armoured Aluminium conductor XLPE insulated PVC sheathed cables confirming to IS 7098 (Part I)/1988 with ISI marking, complete - For Vacuum Pumpset - 1 Nos |
| 157 | Laying of L.T.Cables in trenches inside the pump room or in air, complete. . - 4 sq.mm |
| 158 | Jointing of L.T.Cables - 4 sq.mm - 3 core - 1.1 KV Grade Armoured Aluminium conductor cable confirming to IS 1554/ Part 1 with ISI marking, complete. |
| 159 | For Lighting Load |
| 160 | Supply and delivery of L.T. Cables 4 sq.mm - 3 core -1.1 KV Grade Armoured Aluminium conductor XLPE insulated PVC sheathed cables confirming to IS 7098 (Part I)/1988 with ISI marking, complete - For Lighting Load |
| 161 | Laying of L.T.Cables in trenches inside the pump room or in air, complete- 4 sq.mm |
| 162 | Jointing of L.T.Cables - 4 sq.mm - 3 core - 1.1 KV Grade Armoured Aluminium conductor cable confirming to IS 1554/ Part 1 with ISI marking, complete. |
| 163 | Labour Charges for erection of Horizontal shaft, centrifugal pumpset (Coupled/Monoblock) in bore well/Open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPIC switches starter, Voltmeter, Ammeter, Capacitor single phasing preventor and laying and jointing the cables and twin earthing as per IE rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by EB authorities. |
| 164 | 4980 LPM X 50M HEAD, 70 HP 1+1 |
| 165 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 166 | 1000LPM X 40 M HEAD ,10HP |
| 167 | Providing pump house internal wiring and lighting as per IE rules including E.B wiring materials with 3/20 PVC insulated copper wire PVC conduit pipes with the following components. |
| 168 | 16 Nos. 4 feet 40Watts Box Type with Ballast (Phillps/ Crompton/Wipro/Equivalent) Box type single fluorescent fitting with Copper Choke and Condenser complete with ISI Mark |
| 169 | Supply and Delivery of Plug and Sockets- 5 Amps /15 amps.3 pin flush type wall socket only, complete and as directed by Officers. |
| 170 | Supply and Delivery of Plug and Sockets- 15 Amps 3 pin Top, complete and as directed by Officers. |
| 171 | 7W / 9W LED Bulb |
| 172 | 15W LED Bulb |
| 173 | Wiring with 2x1.5sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipeon wall and ceiling with M.S.accessories inflush with wall with 150mm x 100mm x 75mm MS switchbox with 3mm thick hylum sheet cover for 5A 3pin non interlocking CS plug with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point |
| 174 | Supply and delivery of following set of tools mounted on a teak wood tool Board to be fixed on the wall of the pump room |
| 175 | 6” Chain wrench best India make or equivalent |
| 176 | 8”Chain Wrench Best India Make or equivalent |
| 177 | Connector Screw Driver 901 Taparia Make or equivalent |
| 178 | 200mm Screw Driver 825 Taparia Make or equivalent |
| 179 | 300mm Screw Driver 829 Taparia Make or equivalent |
| 180 | 400mm Screw Driver 930 Taparia Make or equivalent |
| 181 | 200mm Cutting Plier Taparia Make or equivalent |
| 182 | 800gm Ball Pane Hammer with Handle Taparia Make |
| 183 | Digital Tong Tester CE Make or equivalent |
| 184 | Digital Multi Meter CE Make or equivalent |
| 185 | 15” Screw Spanner Taparia Make or equivalent |
| 186 | 12” Bearing Puller |
| 187 | Lever Type Grease Gun |
| 188 | 12”Screw Spanner 1 No |
| 189 | Crow Bar 5” 1 No |
| 190 | 1” Cold Chisel 1 No |
| 191 | Hacksaw Frame with Blade 1 No |
| 192 | Electrical Air Blower 1 No. |
| 193 | Digital Tachometer 1 No |
| 194 | Hand Crimpling Tool 8” 1 No |
| 195 | DE Spanner set 6 to 32 Jhalani Make or equivalent 1 No. |
| 196 | Rings spanner set 6 to 32 Jhalani Make or equivalent 1 No. |
| 197 | Pipe Wrench 24” Jhalani Make or equivalent 1 No. |
| 198 | Pipe Wrench 14” Jhalani Make or equivalent 1 No. |
| 199 | 12” Flat rough File Scissors Make or equivalent 1 No |
| 200 | 12” Flat smooth File Scissors Make or equivalent 1 No. |
| 201 | 12”Round File Rough Scissors Make or equivalent 1 No. |
| 202 | 12” Round File Smooth Scissors Make or equivalent 1 No. |
| 203 | 12”Half Round File Rough Scissors Make or equivalent 1 No. |
| 204 | 12”Half Round File Smooth Scissors Make or equivalent 1 No. |
| 205 | Supply and delivery of following safety appliances |
| 206 | AC Chargeable Emergency Lamp 2 x 11W PL Lamp with all connected accessories |
| 207 | 2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS |
| 208 | First Aid Box complete with all First Aid Medicines |
| 209 | Shock Treatment Chart fixed in glass frame |
| 210 | 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle |
| 211 | Metallic Danger Board as required by the Electrical Authorities |
| 212 | Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms |
| 213 | Earth Discharge Rod |
| 214 | LT /LTCT METERING BOX as per IE Rules and TANGEDCO Norms In LT Supply75HP-150HP/56-112KW (which includes LTCT meter panel board, 6Nos. suitable fuse carriers and 3 Nos. CT coil) |
| 215 | Supply and delivery of pressure gauge of suitable size for suction side and delivery side are to be fixed on teak wood board mounted on the wall with G.M. Cock and copper impulse tubing coupled to a motor of the following spefication |
| 216 | 4500 LPM X 75M HEAD, 85 HP 1+1 |
| 217 | 1000LPM X 40M HEAD ,10HP |
| 218 | Supply, delivery and fixing of the following sizes of CI D/F Pipes and specials for pumpset for proposed Infiltration wells -HSC Pumpset |
| 219 | 4500 LPM X 75M HEAD, 70 HP 1+1 |
| 220 | Supply, delivery and fixing of the following sizes of GI Pipes and specials for pumpset for proposed Infiltration wells -HSC Pumpset |
| 221 | 1000LPM X 20M HEAD ,10HP |
| 222 | Supply and delivery of 2 Ton capacity hand operated overhead travelling crane of girder type suitable for for a span upto 6 m and a travel length of 6 m and a clear lift of 6m with gear type chain pulley block travelling trally and operting chains etc., |
| 223 | Supply, delivery and erection of 5 HP Model/Rotary type Vaccum pumpsets (Pumpset + GI pipes + Fittings + Starters + Valves + 100 Lr.Tank) including Transportation, handling charges all taxes and duties |
| 224 | Supply, Delivery and Fixing of the following items for obtaining Service Connection from E.B.Pole. (Vide Separate Sheet) 25mm 3way Ball Valve Please Enable Macros to View BoQ information |
