Tender For Providing And Installing Of Mechanical Screw Press Of Akash Blowers /Euroteck /Krofta Make For Dewatering Of Municipal Sewage Sludge Of Capacity 6Kl Per Hour With An Inlet Consistency Of 1 Percent Complete In All Respect And To The Best S, Nagrota-Himachal Pradesh
TDR : 54508706
Tender Notice
BOQ
8 Days Left
Nagrota
Himachal Pradesh
Tender For Providing And Installing Of Mechanical Screw Press Of Akash Blowers /Euroteck /Krofta Make For Dewatering Of Municipal Sewage Sludge Of Capacity 6Kl Per Hour With An Inlet Consistency Of 1 Percent Complete In All Respect And To The Best S
Providing and installing of Mechanical Screw Press of Akash Blowers /Euroteck /Krofta make for dewatering of municipal sewage sludge of capacity 6KL per hour with an inlet consistency of 1 percent complete in all respect and to the best satisfaction & direction of Engineer in charge with in all leads and lifts. The mechanical screw press unit includes the following components.
2
A) Technical Specification:-1. Overall Dimensions = 3300x1050x1500mm 2. Material Of Construction = SS3043. Screw Motor and VFDi. Motor Rating = 0.37 KWii. Type of Motor = Standard TEFC SCR induction motoriii. Quantity = 1 Nosiv. Make of Motor = Crompton/Bharat Bijlee/ABB /Equ.v. Type of Operation = Control by VFDvi. Make of VFD = Nidec/Equ.4. Screw Gear Boxi. Type = Heli wormii. Make = Power Build/ Bonfiglioli/Rotomotive / Transtecno/Equ.iii. Quantity = 1 Nos5. Flocculatori. Dimensions = 600x600x750 mmii. Material Of Construction = SS304
3
6. Flocculator Motor and VFDi. Motor Rating = 0.18 kWii. Type of Motor = Standard TEFC SCR induction motoriii. Quantity = 1 Nosiv. Make of Motor = Crompton/Bharat Bijlee/ABB /Equ.v. Type of Operation = Control by VFDvi. Make of VFD = Nidec/Equ.7. Agitator Gear Boxi. Type = Worm Reducer 30: 1ii. Make = Power Build/Bonfiglioli/Rotomotive/ Transtecno/Equ.iii. Quantity = 1 Nos8. Solenoid Valvei. Size = 20 NBii. Body = SS304iii. Seal = Nitrile9. Local Control Paneli. Control Units = Drive motor for Screw press- 01 No & Drive motor for Flocculator- 01 Noii. Material of Construction = MS Powder Coated10. Shower Systemi. Shower Nozzles = 1 Lotii. Material of Construction = SS304
4
B) Accessories for Screw Press:-1. Screw Press Feed Pumpi. Type = Horizontal, Centrifugal, Non-clogii. Capacity = 4 m3/hriii. Head = 12 miv. Material of Construction = Casing-CI, Impeller-SS-304v. Quantity = 1 Nos2. Wash Water Pumpi. Type = Horizontal, Centrifugalii. Capacity = 0.07 m3/hriii. Head = 12 miv. Material of Construction = Casing-CI, Impeller-SS-304v. Quantity = 1 Nos3. Poly Dosing Pumpi. Type = Mechanically actuated diaphragm metering pumpii. Capacity = 160 lphiii. Pressure = 3 Kg/cm2iv. Material of Construction = PPv. Quantity = 1 Nos
5
4. Poly dosing Tank and Preparation Tanki. Capacity = 1000 Litersii. Material of Construction = LDPEiii. Quantity = 2 Nos5. Agitator For Dosing tanksi. Material of Construction = SS-304ii. Material of Construction of Mounting Arrangement = MSEPiii. Quantity = 2 Nos6. Interconnecting, Piping, fittings and Valves (Battery limit 6m for each item)i. Material of Construction (Pipe) = MSii. Material of Construction (Valves) = CI7. Electrical Control Paneli. Material of Construction = MS Powder Coatedii. Switchgear = Schneider/L&T8. Cable and Cable trays (Battery limit 6m for each item) = 1 Lot Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
