|
| 1 | Earth work excavation in all soils and sub soils to full depth as may be directed by the departmental officers except in hard rock requiring blasting but inclusive of shoring, strutting and balling out water wherever nessasary and depositing the earth within initial lead of 10 metre and initial lift of 2 metre etc., complete as per Standard specifications SS |
| 2 | Plain cement concrete 1:4:8 ( One cement four sand and eight broken granite metal ) using 40 mm ISS size HBG metal including cost and conveyance of all materials to working site, laying concrete, compacting, curing, dewatering if necessary and finishing neatly etc. complete complying with standard specification. |
| 3 | Random rubble masonry in cement motor 1:5 (one Part of cement, Five part of Crushed Stone Sand (M- Sand)) mix using all granite stones and bond stones for foundation and basement from approved quarry including watering, curing, and labour charges etc., completed as per standard specification |
| 4 | Supplying and filling with well gravel layers of not more than 15cm thick well rammed watered and compacted including cost and conveyance of sand and filling charges etc complete as per standard specification |
| 5 | Supplying and filling with clean M - sand in layers of not more than 15cm thick well rammed watered and compacted including cost and conveyance of sand and filling charges etc complete as per standard specification |
| 6 | Brick work in cement mortar 1:5 (one cement and five sand) using flyash bricks of standerd size 22cm x 11 cm x 7 cm including cost and conveyance of all materials to site and labour charges etc complete as per Standard specification. |
| 7 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - |
| 8 | Supplying fabricating and placing in position of mild steel or ribbed tar steel for reinforced cement concrete works including cost of steel binding wire all labour charges for cutting fabrication and placing of rods and other incidental charges etc., complete as per standard specification. |
| 9 | Supplying and Erecting Steel Centering for sides and soffits including supports and strutting upto 3.29 m height for plane surfaces such as RCC Slabs, Lintels, Bed blocks, canopy etc., with all cross brasings using mild steel sheets of size 90cmx60cm and 10 gauge stiffened with welded MS angles of size 25mmx25mmx3mm for boarding laid over silver oak (CW) joists of size 10cmx6.5 cm spaced at about 90cm c/c and supported by causrina props of 10cm to 13cm dia spaced at 75cm c/c etc., complete complying with SS and as Directed. |
| 10 | Beam and Slab |
| 11 | Weathering course concrete broken brick jelly20mm size in pure slacked lime over RCC roofslab in proportion 32:12.5 for required depth of thegiving required slope and thickness of roof well beatersby the wooden beaters etc., complete as per standard specification. |
| 12 | Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work |
| 13 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement |
| 14 | Dadooing walls with colour designed Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour lSet in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 15 | Plastering with cement mortar 1: 5 mix (One cement and five sand) 12 mm thick including cost and conveyance of all materials, finishing, curing, and all labour charges etc. complete as per Standard specification. |
| 16 | Plastering with cement mortar 1: 3 mix (One cement and three sand) 10 mm thick including cost and conveyance of all materials, finishing, curing, and all labour charges etc. complete as per Standard specification. |
| 17 | Plastering with cement mortar 1: 4 mix (One cement and four sand) 20 mm thick including cost and conveyance of all materials, finishing, curing and all labour charges etc. complete as per Standard specification. |
| 18 | Supplying and fixing steel door single leaf made out of 18 guage M.S.sheet frame 35mm x 35mm x 5mm angle M.S.flat 25x6mm with aldrop tower bolts 2 Nos. Tow handles eize hold fasts complete welded and revitted and one coat of red oxide painting including cost of all materials and labour charges etc., |
| 19 | Supplying and fixing of M.S. sheet window using 18 gauge M.S.sheet with M.S. angle of size 40x40x6mm and M.S.flat 25mmx6mm and M.S. square bars including cutting, welding, fixing in position cost and conveyance of all materials to site and all labour charges etc., complete as per SS. |
| 20 | White washing two coats inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Celling only ) |
| 21 | Painting two coats for Interior/Exterior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 22 | Painting two coat of new iron works such as steel Doors, windows, ventilators, etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc. |
| 23 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 -Part XII with sand cushion and forming the closet using 40mm broken brick jelly in lime concrete flooring alround 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. |
| 24 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal) with a pair |
| 25 | Providing and fixing P.V.C. Rainwater Downfall pipes of 110mm diametre with necessary shoes, bends and other speicals, clamps, screws, nails, teakwood plugs etc., complete including cost of all materials. The rate is to include cost of removable cast iron Gratings of appropriate size. The size of teakwood plugs to be used is 150mm * 25mm in front and 200mm * 75mm in rear and all other sides with a depth of 100mm. The pipe is to be fixed by means of \\"U\\" clamps at the cnetre of the pipe screwed to the plugs. The special type of 'U' clamps at the centre of the pipe to be fixed in addition to these for more than three metres pipe length, complete complying with standard specification. |
| 26 | Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading,unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., 2000 litres capacity TWAD Pg.99 |
| 27 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. |
| 28 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. |
| 29 | 25mm dia |
| 30 | 32mm dia |
| 31 | Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements |
| 32 | Coupler 25 mm Dia |
| 33 | Coupler 32 mm Dia |
| 34 | Elbow 25 mm Dia |
| 35 | Elbow 32 mm Dia |
| 36 | BEND 25 mm Dia |
| 37 | BEND 32 mm Dia |
| 38 | Tee 25 mm Dia |
| 39 | Tee 32 mm Dia |
| 40 | End Cap 25 mm Dia |
| 41 | End Cap 32 mm Dia |
| 42 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. |
| 43 | PVC Pipe 110 mm Dia |
| 44 | PVC Pipe 90 mm Dia |
| 45 | Supplying and fixing in position 15mm dia C.P.Shower rose & stop cock of approved make confirming to IS specifications and quality including cost of Shellac thread etc. complying with standard specification. |
| 46 | Pillar Tap |
| 47 | SD Tap |
| 48 | Supplying and fixing in position C.P. Towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plug and C.P. Screws etc. complete complying with standard specification. |
| 49 | Supplying and fixing in position C.P. Soap tray of size 150 x 150mm including cost of teak wood plug and C.P. screws. etc. complete complying with standard specification. |
| 50 | Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan Point (For electronic regulator) (5 Points Per Coil) SD 25 |
| 51 | Supply and fixing of 1200 mm (48\\") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod with fan clamp with side plates and cross arm of size 450 mm (18\\") SD 106 |
| 52 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x 113 mm TW switch box for 5 A 3 pin non inter locking Wall socket with 5A Flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point. SD 36 |
| 53 | Dismantling Dismantling Plain Cement Concrete clearing away and carefully stacking materials useful for re-use for any thickness of walls. SOR 2025-2026 (Page no.28) |
| 54 | Earthwork excavation above water level in light or sandy soil for infiltration gallery, syphon or connecting pipeline and connected works including all labours etc complete. |
| 55 | Supply and Delivery of 110mm PVC Pipe Working Pressure: 4 kg. per cm2 SOR 2024-2025 (Page No-14). |
| 56 | 110mm PVC Pipe |
| 57 | Supply and Delivery of the Following PVC Pipes and Specials as per ISI specification including cost and conveyance of all charges etc. |
| 58 | 110mm PVC Bend |
| 59 | 110mm PVC Tee |
| 60 | 110mm PVC End Cap |
| 61 | Supply and delivery of DI D/F Gate (sluice) valves (soft seated) resilient seated soft sealing Gate Valves (Sluice Valves) with body Bonnet of Ductile cast iron of Grade GGG 40 or GGG 50, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O- Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163 89/ISI 14846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 and with 5 years warranty. Ref. SOR 2024-2025 Page no.66 |
| 62 | 80mm DI Gate Valve |
| 63 | 100mm DI Gate Valve |
| 64 | 150mm DI Gate Valve |
| 65 | 200mm DI Gate Valve |
| 66 | Lowering HDPE Pipes and Specials to Trench and Laying to proper grade and alignment and as directed by the Officers.Ref SOR 2024-2025 Vol-II (Page No-171) |
| 67 | Refilling for pipe line workshaving bed width of 1.25m and below on linear measurements basis. |
| 68 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 69 | Plain Cement Concrete 1:1.5:3 (One part of Cement, one and half part of Crushed Sand (M- Sand), three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 70 | Preparing the Existing surface to laying the road to Proper Gradient and remove the loose soil without damage the Water Supply and other Pipe lines. The Rate inclusive of all charges such as Earth work and remove the same away from the site etc, complete as per standard specifications. |
| 71 | Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. |
| 72 | Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. Please Enable Macros to View BoQ information |
