Tender For Bill Of Quantities (Boq) For Beutification Of Park And Boundary Wall Of Ambedkar Park At Vill. Muiuddinpur, Tehsil- Firozabad.
Tender Value
25.42 Lakhs
Estimated cost
Bid Submission
09 Mar 2026
0 days left
EMD
51000
Bank guarantee accepted
Document Fee
1652
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sikandra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Bill Of Quantities (Boq) For Beutification Of Park And Boundary Wall Of Ambedkar Park At Vill. Muiuddinpur, Tehsil- Firozabad.
BOQ
| Sl. No. | Item Description |
| 1 | COST OF BOUNDARY WALL:- Excavation in foundation in ordinary soil (Loam, Clay or Sand ) including lift upto 1.50 m and lead upto 30 m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as dircted by the Engineer In-charge upto a dostance of 30 m from the foundation trenches |
| 2 | Earth work in filling in Cartege earth up to 5KM Distance. |
| 3 | Providing and laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) and curing complete in missing Portion, including cost of form work. In foundation and floors. |
| 4 | M150 class brick work in 1:4 cement and coarse sand in foundation including labour & material complete. |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 6 | Class- 150 brick work in 1:6 cement and C.sand mortar in Super Structure including supply of all materials, labour and T & P etc. required for proper completion of work(23cm) |
| 7 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shaoe as necessary including bending for proper completion of the work and including supply of steel. Its wastage bend, hooks and authorised overlapping shall be measured upto floor two level. |
| 8 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) |
| 9 | 12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) |
| 10 | M.S. steel work |
| 11 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade and undecorated wall surface to give even shade over @ 1.25 ltr/ 10 Sqm including one coat of primer applied @ 0.75 / 10 Sqm coat curing and cost of all material, labour T & P etc required for proper completion of work for two coat. |
| 12 | Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 13 | S/Fixing of Informatory sign Board |
| 14 | COST OF HALL:- Cleaning jungles incliding uprooting of rank vegetation grass, bushes, wood trees and sapling of girth upto 30 cm measured at a height of 1 meter above ground level and removal of rubbish upto a distance of 50 meters out side the periphery of area cleared. |
| 15 | Excavation in foundation in ordinary soil (Loam, Clay or Sand ) including lift upto 1.50 m and lead upto 30 m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as dircted by the Engineer In-charge upto a dostance of 30 m from the foundation trenches |
| 16 | Providing and laying cement concrete in 1:4:8( 1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. In foundation and floors. |
| 17 | Sand filling in plinth including supply of necessary quantity of local sand from a distance not exceeding 8 kms from the site of work and including watering and dressing etc. required for proper completion of work. |
| 18 | Antitermite treatment of soil under floors using chemical emulsion @ one litre per hole, 300 mm apart @ 100 Nos holes 9 Sqm. Including drilling 12 mm diameter holes and piugging also to match the floor property:With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration |
| 19 | Class-150 (Non Modular) brick work in 1:4 with Cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 20 | Class-150 (Non Modular) brick work in 1:6 with Cement and coarse sand mortar in super structure including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 21 | RCC work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, coloums, pillars, abutments, posts and struts etc. including the cost of centering, shuttering, finishing and excluding reinforcement with 1:1.5:3 ( 1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)Footing |
| 22 | Plinth band |
| 23 | Coloum |
| 24 | RCC work in beams, lintels, suspended floors, roofs having balconies, shelves, chajjas, bands, staircases and spiral stair cases above plinth level upto floor five level, including the cost of centering, shuttering, finishing and excluding reinforcement with 1:1.5:3 ( 1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)Lintel band |
| 25 | Sunshade |
| 26 | T-Beam |
| 27 | RCC work providing and laying in position specified grade of reinforced cement concrete, slab above plinth level upto floor five level, including the cost of centering, shuttering, finishing and excluding reinforcement with 1:1.5:3 ( 1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)Slab |
| 28 | Mild steel or iron work in plain work such as reinforced concrete or reinforced brickwork (when not including in and an over all rates) brought to required shape as necessary including bending for proper completion of the work and excluding the supply of steel and its waistage Bend, hooks, binding wire and authorizes over lapping shall be measuresed upto floor to level. |
| 29 | 6 mm Celling plaster in 1:3 cement and Fine Sand) cement & fine sand in F.M. not lassthen 1.25, 1:3 including chiping of RCC surface before ceiling plaster. The cost of including all material, labour T&P and scafolding etc. complete. |
| 30 | 12mm thick cement plaster with cement mortar in proportion of 1:4 cement and Coarse Sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80 mm in girth and finished even and smooth. |
| 31 | 15mm thick cement plaster with cement mortar in proportion of 1:4 cement and Coarse Sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80 mm in girth and finished even and smooth. |
| 32 | 20 mm cement plaster 1:3 (1 cement : 3 coarse sand ) finished with 3 mm thick loating coat of neat cement |
| 33 | Supply and fixing of flush doors, commercial quality conforming of I.S. 2202 part-I (1983) including ISI marked oxidized iron fitting with screws, bolt hinges, handles, siliding bolt, door stoper and tower bolt etc. 35 mm thick |
| 34 | Supply and fixing of flush doors, commercial quality conforming of I.S. 2202 part-I decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters.including ISI marked oxidized iron fitting with screws, bolt hinges, handles, siliding bolt, door stoper and tower bolt etc. 35 mm thick |
| 35 | Providing and fixing glazing in aluminium door, window, ventitor shutters and partition etc. with EPDM rubber/ neoprene gasket etc. complete s per (cost of Aluminium snap beading shall be pair in basic items):With float glass panes of 4.0 mm thickness |
| 36 | Mild steel and iron work of work of small size and section such as holding down woods, hold faste tierods, grating etc. (When not including in and over all rates) brought to required form including supply of steel and its wastage including cost of bolts, nuts if required for proper completion of work including fabrication of holes in door chaukhats and nosing. |
| 37 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 ( 1 cement: 4 coarse sand ): 25 mm thick |
| 38 | Providing and Laying Vitrified tiles in flooring without lean concrete of 500x 500 mm sizes ( thickness 10 mm ), with water absorption less then 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive ( water based) conforming to IS : 15477, including grouting of joints. |
| 39 | S/Fixing Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mottar 1:4 (1 cement : 4 coarse sand ). |
| 40 | P.C.C. 40mm Flooring in 1:2:4 with cement coarse sand stone grite in appron. |
| 41 | Applying priming coat over new steel and other matal surface upto 10 cm in width or girth or small not exceeding 0.10 Sqm area after and including preparing the surface by thoroughly clearing oil, grease, dirt and other foreign mater and scoured with wire brushed, fine steel/wood. scrapper, sand papering and knotting including cost of all material, labour T&P etc. required for proper completion of work. |
| 42 | Finishing walls with Putty approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all materials, labour, T&P etc. required for proper completion of work. |
| 43 | wall painting (one coat) with plastic emulsion paint of approved brand and manufacture on decorative wall surface to give an even shade including thoroughly brushing the surface clean all of drit, grease loose pieces and prepare smooth. |
| 44 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 Ltr/10 Sqm including one coat of primer applid @ 0.75 Ltr/10 Sqm coat curing and cost of all material., labour ,T&P etc. required for proper completion of work for two coat. |
| 45 | Earth work in filling in ordinary soil including cartage up to 12.00 K.M. distance. |
| 46 | Internal electrification work with external connection Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Feb 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedMar 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender